5-8 Vintage Tubular Brass Brake Clutch Rivets Qty 100 7/16 Head Diameter on 2040-parts.com
Granville, Illinois, United States
Offering 100 new old stock vintage 5-8 tubular brass brake/clutch rivets. Raybestos brand. Original box destroyed. Box was marked #15 and in pencil 5-8. May have some discoloration from storage. From old time Chicagoland auto parts store that closed in late 1940s. SPECIFICATIONS (approximate): shank diameter 9/64 (0.1500") 3.81mm head diameter 7/16 (.4395) 11.2mm hole depth 17/64 body length 8/16 (.5185) 13.16mm total length 37/64 (.5770) 14.65mm NOTE: Check actual size of rivets to make sure they will work for you. These are new old stock and many did not have modern size numbers on the boxes. Rivets were measured and numbered as close as possible to the modern rivet numbering system. Some had in between head sizes, which are noted in the listings.
Before purchasing, it is your
responsibility to make sure this item will work for your application. If you
are not sure, call your local dealership to verify this is the correct part for
your vehicle. Or email us; we can attempt to verify the application. We use
many different references to try to determine part applications. Use our
applications as a guideline only and do your own research to be sure you are
purchasing the proper part for your vehicle. Many different variables go into
vehicle applications (engine size, transmission, model, brake system, wheel
drive, etc.). We are unable to list every application for every part we sell.
We do offer a 14 day return policy. We
reserve the right to apply this policy at our discretion. If you destroy the
packaging or send the part back in a non resalable condition, we will not
accept it. If you ordered in error, we are reasonable and will work with you.
We will accept returns within the 14 days and, as long as the part shows no
sign of being installed, issue a refund less shipping and any fees we may have
occurred. The item has to be returned in the same condition and with the same
package as was sent to you. If it shows sign of installation, the package has
been damaged, or there is any other cause for the item to not be considered
new, we will either refuse to issue a refund or issue a partial refund. If shipping seems a little high to you it
is because we do many things to try to have your purchase reach you safely. We
will do one or multiples of the following: place item in a plastic bag,
sandwich bag between 2 pieces of cardboard, bubble wrap, cushioning material,
use a bubble envelope or a box that is larger than necessary to try to protect
item during shipping.
INTERNATIONAL BUYERS PLEASE NOTE: Import duties, taxes and charges are not
included in the item price or shipping charges. These charges are the buyer’s
responsibility. Please check with your country’s customs office to determine
what these additional costs will be prior to bidding/buying. These charges are
normally collected by the delivering freight (shipping) company or when you
pick the item up – do not confuse them for additional shipping charges. We DO
NOT mark merchandise values below value or mark items as “gifts” – US and
International government regulations prohibit such behavior.
We combine shipping on multiple item purchases. The shipping
calculator is not always accurate and doesn’t list all shipping options. We
charge actual shipping and packaging material costs and a small fee for
handling. EBay charges a final value fee on shipping so please
wait for an invoice with the correct combined shipping cost on multiple item
purchases before paying. An invoice will be sent usually within 24 hours. If you are
concerned about shipping costs, please ask before purchasing. If you email us
your zip code, we will gladly work up a shipping estimate for you. Pick up is
always welcome.
Many of the items we sell are vintage or
no longer in production. All items are sold as stated and there is no implied
warranty. By purchasing an item, you agree to take full responsibility and liability
for the use, installation, maintenance, and operation of the item as well as
any and all consequences which come out of its purchase, use and/or misuse.
Inv #6131HG9ZBMLRA7 |
Brakes for Sale
- 50 vintage countersunk solid copper brake clutch rivets 1/2 long x 9/64 shank(US $18.95)
- Nos bendix air brake release valve, 1957 1958 1958 chevrolet truck 70-80 #205000(US $39.95)
- Brake line kit for 1941-1958 dodge truck 1/2 ton 2wd b1 d100
- Copper nickel brake line kit mustang 1964-1976 cougar 1968-1976 no more rust
- Master cylinder kit for chevrolet 3/4 - 1 ton trucks 1939 1940 1941 1942 - 1952
- Disc brake rebuild kit camaro firebird 1969-1975 w/ factory delco single piston
Volvo XC70 (2007): first official pictures
Tue, 06 Mar 2007By Chris Chilton First Official Pictures 06 March 2007 05:48 I see Volvo hasn't given up on the halfway SUV idea Far from it. In fact Volvo UK watched sales of the old V70-based XC70 rise after the introduction of the full-blown XC90 off-roader. Apparently many buyers were lured into showrooms by the XC90 but found themselves signing on the dotted line for its smaller brother.
Bonneville broadcast will add pepper to the salt
Wed, 31 Jul 2013If you've ever been to Bonneville during Speed Week, you know what a thrilling corner of the motorsports world the place occupies: standing out on the endless, blazing-white expanse of salt, hearing the cars before you see them, seeing first the roostertail of salt rocketed into the air, then the tallest part of the rear fin, then the car itself, blasting over the curvature of the Earth, followed by engine cutoff, popping chutes, deceleration and the giddy celebration of driver and crew as yet another record falls. But most people -- those with jobs, kids, responsibilities (where are your priorities, people???) -- will never get a chance to go. So this year, the Southern California Timing Association has made a deal to broadcast audio of the entire Speed Week live, as it happens, direct from the salt, on the fabulous internet.
Range Rover Evoque Convertible Concept (2012)
Fri, 24 Feb 2012Land Rover is exploring a convertible version of the Evoque, and will make a production decision ‘within six months’. Design director Gerry McGovern unveiled the ‘fresh out of the workshop’ concept at Pinewood Studios today (February 24); the car will make its public debut at the Geneva show in March. The Evoque convertible concept has a powered soft-top roof with a glass rear screen, which stows in a recess below the rear deck.