5 Ev14 1200cc Fuel Injectors, One-piece Adapters, Audi Aan Volvo B52 Matched Set on 2040-parts.com

USE FOR HIGHLY MODIFIED SUPERCHARGED & TURBOCHARGED ENGINES ONLY.

• LIST PRICE: Complete set of 5 FUEL INJECTORS with CONNECTOR ADAPTER Set
  
• DYNAMICALLY & STATICALLY BALANCED at a TRUE 1200cc/114lbs
• OE FIT: 3" LONG-length - Audi, Volvo, BMW
  
• Genuine EV14 fuel injectors
  
• ADAPTERS INCLUDED: PLUG 'N' PLAY - No cutting. No splicing. No soldering.
  

FLOW CHART: Each fuel injector set is sold with a complete flow-data chart indicating individually tested dynamic and static flow rates at 3.0, 3.5, and 4.0 BAR. Each set will maintain linearity throughout the test range of idle, 15-25%, 50% and 100% duty cycle. Data also includes a complete dead time (latency) table.
Flow testing and matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results. Linear tuning with excellent low-end, and idle rpm.
All fuel injector sets are guaranteed to be flow matched to within +/- 1.0%

Use for super street or racing, single or multi-valve, naturally aspirated or forced-air/exhaust induction engine applications using pump and racing gasoline or most green/oxygenated fuels.

This is a high performance, high volume fuel injector. These injectors have been highly modified and flow-matched to specific specifications. The fuel delivery is from a single-hole ball/disc-type fuel nozzle - incorporating our exclusive split-fountain dual-cone spray for maximum fuel atomization.

High resistance, no inline resistors or resistor box required for use.

This set of injectors has been tested and will function at rail pressures up to of 101.5 psi, 7 bar.

Excellent low pulse width response with predictable response.
Excellent fuel atomization for modern multi-valve engines.
This set will require no more than a 1% trim for easy tuning.

Injector type: EV-14, saturated
Spray Nozzle: Single-hole ball/disc with a split-fountain for maximum atomization
Flow rates:
1200 cc/min - 3.0 BAR
1308 cc/min - 3.5 BAR
1416 cc/min - 4.0 BAR
Complete static and dynamic flow information included with each set.
Dead Time: 0.921 ms at 14 volts
Coil Resistance: 12.5 Ohms

Dimensions:
Overall Length: 3.0 inches, 74.5 mm
O-ring to o-ring: 2.50 inches, 64 mm
Injector body diameter: 0.60 inches, 15 mm
O-rings: Viton, top and bottom, 14.5 mm

Electrical connector type: U.S. CAR