50 Vintage Countersunk Solid Copper Brake Clutch Rivets 1/2 Long X 9/64 Shank on 2040-parts.com
Granville, Illinois, United States
Offering 50 new old stock vintage countersunk solid copper brake/clutch rivets. Original box was open, rivets have green surface corrosion. From old time Chicagoland auto parts store that closed in late 1940s. SPECIFICATIONS (measurement approximate): shank diameter 9/64 (0.1375) 3.49mm head diameter 9/32 (.2670) 6.78mm body length 7/16 (.4095) 10.40mm total length 1/2 (.5040) 12.80mm NOTE: Check actual size of rivets to make sure they will work for you. These are new old stock and many did not have modern size numbers on the boxes. Rivets were measured and numbered as close as possible to the modern rivet numbering system. Some had in between head sizes, which are noted in the listings.
Before purchasing, it is your
responsibility to make sure this item will work for your application. If you
are not sure, call your local dealership to verify this is the correct part for
your vehicle. Or email us; we can attempt to verify the application. We use
many different references to try to determine part applications. Use our
applications as a guideline only and do your own research to be sure you are
purchasing the proper part for your vehicle. Many different variables go into
vehicle applications (engine size, transmission, model, brake system, wheel
drive, etc.). We are unable to list every application for every part we sell.
We do offer a 14 day return policy. We
reserve the right to apply this policy at our discretion. If you destroy the
packaging or send the part back in a non resalable condition, we will not
accept it. If you ordered in error, we are reasonable and will work with you.
We will accept returns within the 14 days and, as long as the part shows no
sign of being installed, issue a refund less shipping and any fees we may have
occurred. The item has to be returned in the same condition and with the same
package as was sent to you. If it shows sign of installation, the package has
been damaged, or there is any other cause for the item to not be considered
new, we will either refuse to issue a refund or issue a partial refund. If shipping seems a little high to you it
is because we do many things to try to have your purchase reach you safely. We
will do one or multiples of the following: place item in a plastic bag,
sandwich bag between 2 pieces of cardboard, bubble wrap, cushioning material,
use a bubble envelope or a box that is larger than necessary to try to protect
item during shipping.
INTERNATIONAL BUYERS PLEASE NOTE: Import duties, taxes and charges are not
included in the item price or shipping charges. These charges are the buyer’s
responsibility. Please check with your country’s customs office to determine
what these additional costs will be prior to bidding/buying. These charges are
normally collected by the delivering freight (shipping) company or when you
pick the item up – do not confuse them for additional shipping charges. We DO
NOT mark merchandise values below value or mark items as “gifts” – US and
International government regulations prohibit such behavior.
We combine shipping on multiple item purchases. The shipping
calculator is not always accurate and doesn’t list all shipping options. We
charge actual shipping and packaging material costs and a small fee for
handling. EBay charges a final value fee on shipping so please
wait for an invoice with the correct combined shipping cost on multiple item
purchases before paying. An invoice will be sent usually within 24 hours. If you are
concerned about shipping costs, please ask before purchasing. If you email us
your zip code, we will gladly work up a shipping estimate for you. Pick up is
always welcome.
Many of the items we sell are vintage or
no longer in production. All items are sold as stated and there is no implied
warranty. By purchasing an item, you agree to take full responsibility and liability
for the use, installation, maintenance, and operation of the item as well as
any and all consequences which come out of its purchase, use and/or misuse.
Inv #6144HG7ZBMLRA3 |
Brakes for Sale
- Nos bendix air brake release valve, 1957 1958 1958 chevrolet truck 70-80 #205000(US $39.95)
- Brake line kit for 1941-1958 dodge truck 1/2 ton 2wd b1 d100
- Copper nickel brake line kit mustang 1964-1976 cougar 1968-1976 no more rust
- Master cylinder kit for chevrolet 3/4 - 1 ton trucks 1939 1940 1941 1942 - 1952
- Disc brake rebuild kit camaro firebird 1969-1975 w/ factory delco single piston
- Nos brake stop light switch for packard 1941 1942 1943 1944 1945 1946 1947
Nissan GT-R (2011): first pics of enhanced GT-R
Tue, 19 Oct 2010Nissan has today whisked the covers off the new 2011 model year GT-R. There's a host of equipment and technical upgrades, as well as a massively new look. Actually, we made that last bit up.
2013 Mercedes SL 65 AMG – it’s official
Tue, 20 Mar 20122013 Mercedes SL 65 AMG - New York debut Mercedes-Benz has confirmed the 2013 Mercedes SL 65 AMG as the new SL range-topper and its debut at the New York Autro Show. It had seemed that the V12 Mercedes SL 65 AMG would be a victim of the culling of V12 engines from car makers’ ranges as the imperative to cut emissions and reduce fuel consumption saw the glorious V12s replaced by smaller forced-induction engines. But not at Mercedes-Benz.
VW E-Bugster convertible concept car at 2012 Beijing motor show
Sun, 22 Apr 2012Volkswagen, one of the biggest players in China's swelling car market, chose Beijing to unveil its latest E-Bugster - a good look at the forthcoming convertible version of the Beetle. We saw the E-Bugster in tin-top form at the 2012 Detroit auto show; now they've gone and chopped the top fully for Beijing. It's a two-seater speedster version of the Beetle hatch, driven by an 85kW electric drive system; essentially, the powertrain of this car is what will underpin the 2013 Blue-e-motion electric Golf.