Sell 54020 SB Ford 302 5.0 L 1988-95 Typhoon EFI Intake Manifold Mustang Polished in Brookings, South Dakota, United States, for US $499.95

Condition:New Part Brand:Professional Products Brand:Professional Products Manufacturer Part Number:54020

SquareTrade © AP6.0

New Show Polished Power+Plus TYPHOON EFI Intake Manifold for 1986-'95 Mustang 5.0L V8






Manufacturer:	Professional Products

-Your Authorized Professional Products Dealer

Description:

The new Professional Products Power+Plus High Performance Street Manifold for injected Mustangs is a breakthrough in styling and performance. This new manifold is suitable for high performance street use, bracket racing, nitrous, or supercharged applications. Use the Professional Products 70mm Throttle Body for optimum performance (see our other auctions for: PP-69200 1986-'93 5.0L V8 70mm Polished Throttle Body).

On 1993-'95 applications use:
1. Throttle body adapter from Trick Flow Specialties #5150SN95 or Edelbrock #3835
2. Strut Tower Brace #M-20202-A51 from Ford Racing or #5225 from Edelbrock for proper clearance.

1994-'95 Late model applications also require Edelbrock Fitting #8025, EGR Supply Spacer.

Note: Several other manufacturers make similar manifolds for this application. However, the Power+Plus polished version retails for less than competitive unpolished models. And our satin model is $200 less than the others. Manifold comes split with all necessary hardware to assemble.

Features:
This manifold assembly has provision for EGR and PCV Use Fel-Pro #1 250 Intake Gasket with this manifold Air valve location is 0.30-inches higher and 0.50-inches forward of stock location Suitable for high performance street use, bracket racing, nitrous, or supercharged applications 1500 - 6500 RPM range Use 70mm Throttle Body for optimum performance. Professional Products TB & EGR are available.
PP-69200 1986-'93 5.0L V8 70mm Polished Throttle Body* PP-69501 1986-'93 5.0L V8 Polished EGR Plate PP-69210 1994-'95 5.0L V8 70mm Polished Throttle Body * Street Legal applications must also use EGR Plates
Dyno Testing the POWER+PLUS Mustang EFI Manifold One of Professional Products Mustang specialists customers recently tested the above 54020 Typhoon EFI manifold and compared it to the Trick Flow Specialties Track Heat model and also to a Ford Racing Cobra model. From 2,100 rpm up to about 4,700 rpm, all three manifolds were similar in power output with the Cobra having a slight edge over the Typhoon while the Typhoon had slightly better power than the Trick Flow. At 4,900 rpm, the Cobra was basically all done while the Typhoon and the Trick Flow continued to make more power. Both the TFS and Typhoon produced about 30 HP more than the Cobra at 5,700 rpm. The power on the upper end was basically the same between the Typhoon and the TFS. These tests were peformed for one of the Mustang magazines. 30 horsepower MORE than the Cobra, and a slight edge on the Trick Flow.

Shop and Compare! Trick Flow Track Heat Manifold: 1500-6500 rpm, Non-Polished, $450.00 Trick Flow Street Manifold: idle-5500 rpm, Non-Polished, $395.00 Ford Racing Cobra Manifold: Non-Polished $399.95 to $519.95 Weiand Stealth EFI Manifold: Non-Polished $579.95 Edelbrock Performer EFI Manifold: Non-Polished $484.95 Edelbrock RPM Manifold: Non-Polished $499.95

One Lap of the Web: Cop-car guide, an inside look at Morgan Motors and the best hybrid cars

Wed, 10 Jul 2013

We spend a lot of time on the Internet -- pretty much whenever we're not driving, writing about or working on cars. Since there's more out there than we'd ever be able to cover, here's our daily digest of car stuff on the Web you may not otherwise have heard about. -- Just when we think everything is going smoothly when we're driving, those flashing lights pull up behind us.

Nissan tests DeltaWing in a wind tunnel before Le Mans

Thu, 12 Apr 2012

Nissan sent out a video on Thursday, calling it part one in a series on the development on the DeltaWing. The videos will tell the behind-the-scenes story of the car’s journey to the 24 Hours of Le Mans. Similar to the Juke-R series, which stretched to nearly 10 videos, this series will show the process of making the DeltaWing race ready.

Enzo Ferrari: Twin turbo & 1000 hp

Thu, 19 Aug 2010

1,000 hp twin turbo Salt Flats racing Enzo There’s an argument that messing with a limited edition hypercar is sacrilege. And, to a degree, we sympathise with those who consider the pimping of an Enzo Ferrari by the likes of Uwe Gemballa to be akin to letting Damian Hirst paint a new set of clothes on the Mona Lisa. But there are times when the reasons make a whole lot of sense.

54020 Sb Ford 302 5.0 L 1988-95 Typhoon Efi Intake Manifold Mustang Polished on 2040-parts.com

Intake Manifolds for Sale

One Lap of the Web: Cop-car guide, an inside look at Morgan Motors and the best hybrid cars

Nissan tests DeltaWing in a wind tunnel before Le Mans

Enzo Ferrari: Twin turbo & 1000 hp