6 - 300zx Vg30 750cc Jecs Fuel Injectors Side Feed Flow Matched Phase Ii Kit on 2040-parts.com

• USE FOR HIGHLY MODIFIED ENGINES ONLY
• NISSAN 300ZX, ZXTT 1994-97
• YOU RECEIVE A COMPLETE SET OF FUEL INJECTORS, 6--750cc AND 6 piece Phase II adapter Kit.
  

FUEL INJECTOR SPECIFICATIONS:
Custom, flow-matched, 750cc, side-feed, high-performance, Nissan fuel injector

• All new o-rings included for installation

FIVEOMOTORSPORT FUEL INJECTORS are custom-manufactured in small-quantity batches to achieve the highest quality product.
Our injectors are all-fuels rated; including gasoline (MTBE), and E-85.
The finished injectors are then flowed and inscribed with a control number.
Data is recorded for each injector. The fuel injectors are then grouped into matched sets ready for shipping.

FLOW CHART: Each set is sold with a complete and unique flow-data chart indicating individual static flow rates at 3.0, 3.5, and 4.0 BAR.
As well as 3.0 BAR dynamic pulse testing for idle (15% duty-cycle) and 50% duty-cycle.
Along with a complete dead time off-set (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results.
Linear tuning with excellent low-end, and idle rpm.
Fiveo is the only fuel injector seller that can claim this level of technology.

SPECIAL NOTE TO OUR E85 USERS:
Ethanol based fuels tend to "dry" the fuel injector outlet orifices.
Users/tuners should be made aware that this may cause a "sticking" problem in fuel injectors that sit idle for a prolonged period of time.
It is suggested for applications running high ethanol content based fuels, to periodically incorporate into their fuel-system-maintenance a drop of light petroleum-based lubricant for each fuel injector.
This is also considered to be good maintenance, but not essential, for stainless steel based (Black-Ops Series) fuel injectors. 
It should also be noted that for optimum performance the entire fuel system should be made up of ethanol approved materials including all fuel lines/fuel pump/fuel filter, etc.

Injector Body Design: Metal and composite plastic
Flow rates: 
(These are true and tested flow rates of this individual set of 6 fuel injectors. 
We use Heptane as our testing agent).
750cc/min at 43.5 psi (3 bar)
Excellent low pulse width response with predictable response.
Excellent atomization for modern multi-valve engines.
This set will require no more than a 1% trim for easy tuning.