6 - Bosch 24lb Fuel Injectors Vw Vr6 Porsche 911 Bmw M3 M30 E30 E28 E36 M50 on 2040-parts.com
Nanton, Alberta, CA
6 - 24lb BOSCH Design III Fuel injectors ASNU serviced WITH warranty Buy with confidence, we are a 10+yr Ebay seller International bidder welcome! ________________________________________________________ Up for auction is a set of 6 - BOSCH 24lb/hr(255cc/min) Fuel injectors. These are the Design III Bosch injectors with the 4-hole discharge for superior fuel atomization. They offer fast, predictable response times down to 2ms which make them great for high performance applications. These are leaps and bounds better than their Design 1 and 2 metal body predecessor. These are great for mild to moderate turbo/supercharged set-ups, or heavy breathing N/A engines (cams, intake, exhaust). These are HIGH impedance, so they do not require the use of a resistor box. This set is flow matched to less than %1 for optimal performance, and easy tune-ability. This set is also covered by our 2yr unlimited mile warranty. BMW owners: Most 80's BMW's have a factory fuel pressure setting of 43.5psi which equates to a flow rate of 24lb/hr for these injectors. Most 90's BMW's run at 50psi which equates to a flow rate of 27lb/hr for these injectors.
SPECS:
Flow Rates:
- 255cc/min (24lb/hr) @ 43.5 psi
- 285cc/min (27lb/hr) @ 50psi
- 312cc/min (29.7lb/hr) @ 58psi
Resistance rating: HIGH impedance(12.8-16.6 Ohms)
Voltage: 8-15 Volts, Nominal 12 Volts
Pressure: Min. 36 PSI (2.5 bar), Max. 100 PSI (7 bar)
Surface finish: Metal & plastic composite
Fitment: 14.5mm o-rings (upper and lower).
Applications:
Porsche:
- 90-94 911 Carrera, RS roadster, Targa, speedster
Volkswagon:
- 92-98 VW Golf, Jetta, Passat, & Corrado VR6
BMW: Please contact if you do not see your application, not all are listed
- 1987 L6, L7
- 83-85 318i
- 85' 318i 1766cc L-Jet
- 91-94 318i, 318is
- 91-95 98-99 323iC, 323iS (M52)
- 1988 325e
- 87-93 325i
- 87-91 325iS
- 88-91 325iC,325iX
- 94-95 325iC (M50)
- 92-95 325i, 325iS (M50)
- 96-00 325i 2.8
- 96-00 328i/ic/is
- 89-90 525i
- 91-95 525i (M50)
- 93-95 525iT (M50)
- 1988 528e
- 96-00 528i
- 85-87 635CSi
- 85-93 535i
- 85-92 735i
- 88-92 735iL
- 1995 M3
- 97-99 M3
- 91-93 M5
- 98-00 BMW Z3
__________________________________________
All of our injectors have undergone the following process on one of our ASNU diagnostic machines:
- Resistance and continuity checked
- Visually inspected to insure a quality platform
- Hand cleaned and degreased
- Ultrasonically cleaned and reversed flow cleaned
- Flow tested (static and dynamic) with spray pattern observed for consistency
- Drive simulation from 600-10000 RPM with spray pattern observed
- High pressure & low pressure Leak down tested
- New filter baskets, o-rings, and pintle caps installed
- Machine polished
- Re-inspected & prepped for shipping
______________________________________________________
SHIPPING COSTS, transit times, & GST:
*less than Acutal costs (Once received, please check the shipping label. We charge less than the actual cost to ship!)
Canada - $12.50 for surface (tracked)
* Canadian Customers: GST is applicable to your purchase. We will send you a seperate invoice with the appropriate GST at auction end. This must be paid befor your item can ship.
48 United States - $13.99 for EXPEDITED (6-12 Business days, insured, delivery confirmation)
- $24.99 Xpresspost (3-6 BUSINESS days guaranteed, delivery/track number)
*Alaska, Hawaii, & Puerto Rico: Shipping cost is the same but transit times will be slightly longer.
INTERNATIONAL - $59.99 for Xpresspost ( 8-12 BUSINESS days)
*International destinations please be aware of possible duty/brokerage/border fees.
SHIPPING YOUR ITEM:
We try to ship most items within 1-2 days of receiving cleared payment. In some rare cases it may take 3-4 days to ship your item. If this is the case you will be notified by email, or ebay message. Tracking/delivery confirmation numbers will be attached to the item in your Ebay the days the item ships, or the following day. If you have any questions please do not hesitate to ask. We are here to help :)
**Pictures are of OUR actual items, and are property of 1sickgt (Performance Fuel Injection).
Fuel Injectors for Sale
Two rare new bosch dodge cummins diesel 0 432 133 875 0432191342(US $125.00)
New oem bosch 2416156393 diesel camshaft !! 2 416 156 393(US $195.75)
4 new in box bosch iridium 9651 spark plugs !! 4 sets of 4 available !!(US $21.95)
Fuel injector chrysler lebaron daytona new yorker reman(US $39.90)
Bwd 63857 automotive multi port fuel injection injector new in box(US $19.99)
Fuel injector isuzu impulse 84 85 86 87 1.9l reman(US $34.94)
Nissan Leaf electric vehicle headed for U.S. market in 2010
Sat, 01 Aug 2009Nissan has taken the wraps off its production-bound electric vehicle, named Leaf, that is plans to sell in Japan, the United States and Europe. The Leaf seats five and measures 175 inches long--about the same size as a Versa sedan. It uses an 80-kilowatt AC electric motor and draws from a laminated lithium-ion battery pack--the same type of batteries used by cellular telephones and laptop computers.
Bentley Blowers take on the 2013 Mille Miglia
Wed, 15 May 2013The first is the No.2 Team Car raced by Tim Birkin – one of the Bentley Boys – at Le Mans and bought back by Bentley in 2000. Perhaps best known for its tussle with Mercedes’ awesome 7 litre Kompressor at Le Mans in 2013, the car has been regularly put to good use round the world since Bentley bought it back. The second Blower was originally a Bentley demonstrator, completed in 1930, and has a Vandan Plas Open Sports Four Seater body and after its life as a demonstrator was sold off but bought back in 1997 and it too has been carrying the historical banner for Bentley around the world ever since.
2013 Mazda RX-9 to be rotary hybrid
Wed, 25 May 2011Mazda Shinari: The 2013 Mazda RX-9 will be a coupe version of the Shinari Concept You know the deal by now. A motoring publication somewhere had a quiet news day and writes a speculative story. That speculation becomes a rumour and that rumour becomes ‘fact’.