Find or Sell any Parts for Your Vehicle in USA

7" Quad Monitor+2x Ir Side View Ccd Camera Waterproof Night Vision For Truck Rv on 2040-parts.com

US $189.00
Location:

Shenzhen,Guangdong, China

Shenzhen,Guangdong, China
Condition:New Type:Rear View Camera Kit Screen Size:7" Brand:iPoster Warranty:Yes Manufacturer Part Number:IP9086HD


Descriptions:

Car Truck Bus Van Trailer Reversing Camera Kit Quad Split 4-screen 
7" TFT LCD Sunshade Cover Monitor
1x 33Ft / 10M Cable + 1x 49Ft / 15M Cable
 2x Side View CCD 18 IR LEDs CCD Color Camera Night Vision Waterproof
 photo iPoster-1600_zpsd8d9lrrc.jpg  photo iPoster-1601_zps700cqf1j.jpg

 photo iPoster-1603_zpsu7i3tit8.jpg

 photo iPoster-1610_zpszi8i6mq6.jpg



The advantages of 4-pin connector cable

One cable solution deals with both power and singal transmission. No power cable is needed to connect cameras. Special thick hard wire can shield vehicle's circuit interference better than normal AV cable.


The difference between CCD and CMOS camera

CCD camera has sharper pictures. It sharpens the focus of picture, making it as real as possible.

CCD lens Makes clear night vision even in a low light environment.


18 infrared lamp used in the low light condition

You can easily adjust the angle at Multi-level

120 degree angle lens, ensure car’s rear side for effective reversing and parking operation

100% complete waterproof

12V-24V input


Click here to Enlarge
9 Inch Monitor+ 4 Camera-010.jpg (700×489)

Description:
  • Features:
    - 100% Brand New, with 7 inch LED backlight color TFT LCD display monitor.
    - Equipped with 2 AV input. AV1 connects to car DVD, VCR and other video equipment, AV2 to car backup camera.Blue wire is for displaying car reversing image automatically when it's connected with a rearview camera.You need to adjust it manually if the blue wire is not connected.
    - Working perfectly with Car DVD, VCD, camera, STB, satellite receiver, and other video equipment.
    - When you're backing your car, The monitor will start up automatically, and synchronously display the video from rear view camera, and it will close itself after backing.
    - Support rotating the screen
    - The Brightness, contrast and color can be adjusted.
    - There are 2 ways to install: standing or mounting.
    - Low power consumption.
    - No Audio input or output.
    - Comes with an IR remote controller for a easy operation.
  • Specifications:
    - Screen Size: 7 inch
    - Display Component: Color TFT LCD
    - Screen Ratio: 16:9/4:3 
    - Resolution: 800 x 480 Pixels
    - Contrast Ratio: 100:1
    - Video Frequency: PAL/NTSC
    - Housing Material: ABS
    - Power Supply: DC 12V
    - Working Temperature: 0 ~ 80 degree 
    - Storage Temperature: -10 ~ 80 degree
    - Product Dimensions(L x W x D): 193 x 135 x 25mm
    - Product Net Weight: 381g
    • Latest & Popular 7" TFT LCD Monitor+Touch Button+Remote Control + Night Vision Rear View Camera.
    • A simple solution for car reverse system.
    • Waterproof IR camera with wide view angle, 10m length video cable, plug and play, 7" High quality ultra-thin monitor, 2 channel video inputs, Easy installation. This kit is used for 12V vehicle.
    • It acts as a normal rear view mirror, and reflector will automatically appears when the monitor is turned off. So you can clip it over your original mirror, and it will show rearview image; while it is connected with rear view camera (including in this package), the rear view image will appear on the screen automatically when reversing the car.

  • Technical Details
    - The TFT SCREEN has the switches to change between normal to mirrored image of the 2 cameras.
    - Camera selection is done via remote controller or by pressing button on the monitor.
    - Rear view camera is turned on automatically when vehicle is put on reverse gear.
    - Aerospace-type cinch connectors are used for all connections.
    - Lightweight, 16:9 wide-angle view 7" TFT LCD color monitor with remote controller.
  • Reverse using features:

    • 1. Auto switching when reversing Under power-on condition. When reverse gear is on, the system automatically switches from DVD/VCD video to backup camera video. And when parking is finished, it will switch back automatically, which can ensure parking safty.
    • 2. AV signal auto detecting power on/off Under power-off condition. When reverse gear is on, the system automatically starts to search for the camera signal and display backup video. When parking is finished, it will switch off automatically.

  • Features:
    - Professionally designed system with industrial leading components/parts.
    - CCD camera with 2.1mm wideangle lens. This offers a super wide field of view angle at 120°. 
    Most other manufacturers use 3.6mm or 2.8mm lens, the view angle is much narrower. You can see more areas by using 2.1mm lens
    - Builtin 18 IR LEDs for over 20ft nightvision view.
    - Heavyduty 10M (33ft) video + power cable with a waterproof aerospacetype connector.
    - Waterproof camera body with a sunvisor and metal bracket. Easy to mount on any flat surface of the vehicle
    - Rubber seat for video cable to go through inside the cabinet without scratching the surface.
    - 12V DC power input range to fit most of the medium to large vehicles on the road
    - Allinone design to get rid of the bulky converter power box, very easy to setup.
    - The TFT SCREEN has the switches to change between normal to mirrored image of the 2 cameras.
    - Camera selection is done via remote controller or by pressing button on the monitor.
    - Rear view camera is turned on automatically when vehicle is put on reverse gear.
    - The most advanced part is that the 2 cameras can switch on in turn automatically depending on the status of your vehicle, like opening the door.
    - Aerospacetype cinch connectors are used for all connections. This is more reliable and simple to install.
    - Lightweight 16:9 wide angle view 7" TFT LCD color monitor with remote controller. Special heatventilation design for longer life of use.
Accessories:
  •  - 1 X Digital 7" TFT LCD color monitor 
     - 1 X Mount/stand 
  •  - 2 X Side View Water-proof CCD Color cameras with IR LEDs Night Vision 
     - 2 X 49Ft/15M+33ft/10M 4Pin extension cable for cameras 
     - 1 X Remote control (Without Battery)
     - 1 X Power connection wire(video connectors are built-in this wire) 
     - 1 X Screw kit for installation 
     - 1 X User manual

Payment

  • 1.We ONLY accept payment via PAYPAL.

  • 2.TOTAL AMOUNT DUE includes the final auction price plus S&H(Shipping and Handling).

  • 3.S&H will be determined based upon the SHIP TO address. PLEASE NOTE: S&H DOES NOT INCLUDE DUTIES, LOCAL TAXES OR ANY OTHER IMPORTATION FEES.

  • 4. Please list your special requests (color, packages, etc.) in the PAYPAL NOTES SECTION when you make payment.Payments are expected within 7 days after the last winning auction is closed. Unpaid item complaints will be filed with eBay upon not receiving payment.

     

Delivery details

  • 1. Item will be shipped within 24 - 48 hours after full payment is received.

  • 2. We only ship to confirmed eBay addresses. Your eBay address MUST MATCH your Shipping address.

  • 3. We ship worldwide via China Post with Tracking number. this international shipping may take a long time to delivery, Normally it costs 10 -25 business days, exclude Sat & Sun.

  • 4.We can also provide express post by DHL(5-8 days). The cost is higher than standard postage, about$ 20 or higher. If you want post by DHL, please contact us.

     

Terms of sales

  • 1.If buyer requests a return when there is no quality problem of the item he received,return postage has to be paid by buyer,and postage for the item won't be returned.

  • 2.If item is damaged or defective on arrival,buyer can either requests a refund or replacement,and postage will be paid by us,meanwhile,the item must be returned.

     

Contact us

  • Positive feebacks and Excellent DSR will be much appreciated!
  • If you have any problem.please feel free to contact me,we do try respond as quickly as possible. Due to time zone difference, please allow 12~24 hours to get your mail replied

Kia Soulster concept unveiled at Detroit auto show 2009

Mon, 12 Jan 2009

By Ben Pulman Motor Shows 12 January 2009 13:48 To rub salt into the wounds of the beleaguered Big Three, Korean manufacturer Kia unveiled its own version of the iconic American pick-up truck at the Detroit auto show. But rather than a ultilitarian flat-bed, the Soulster concept is something at the very other end of the scale, designed to drum up interest in the Soul (on which it's based) before the B-segment baby goes on sale later in 2009. The Soulster concept was penned at Kia’s LA design studio – where the original Soul concept was created – and while there are no current production plans, company insiders have said that the right reaction from American customers could see the Soulster become a reality.

2013 Skoda Superb Facelift revealed

Wed, 03 Apr 2013

The Skoda Superb has been given a facelift for 2013 with cosmetic tweaks and improved emissions and economy. Debuts at Shanghai Motor Show. The usual facelift fodder applies – for the hatch and estate – with new bumpers front and back with a new grill, lights, front wings and bonnet with a tidying up at the back and LED lights.

Pierre Authier: I'm not moving to Opel/Vauxhall

Fri, 31 Aug 2012

As the ongoing General Motors designer saga continues, the latest Opel/Vauxhall Vice President of Design elect, Pierre Authier has taken his name off the shortlist for the Rüsselsheim. Car Design News had received information from a reliable source within PSA about Authier's supposed move, however we have since spoken to Pierre, who was keen to put the record straight: “I read the flattering article on my recruitment as VP of Design for Opel/Vuaxhall, but this information is false,” he told CDN. “I am really enjoying my position at Peugeot and with the 208 family team that has made such incredible work.” The search for the missing piece in the GM puzzle continues.