700hp Ls3 Cnc Ported Head Cam Combo (.750 Lift Custom Cam W/ Heads Set For Cam) on 2040-parts.com
Angola, Indiana, United States
|
Purchaser to receive:
One set of new GMPP LS3 CNC ported heads custom built and set up for up to a .750 lift hydraulic roller custom camshaft w/ 1.8 ratio rocker arm or upto .730 lift with a 1.7 ratio rocker. We have made up to 758hp naturally aspirated on the dyno using our custom hydraulic LS roller cam profile with CNC ported head. This package uses a titanium retainer and very high quality valve spring. We spec custom cam for your intended use. We can run lower lift on the cam profile if need be. Duration, LSA, and centerline are all custom designed for your intended use whether full race, street/strip, or nitrous and/or boost. We offer 6-bolt head packages and LS7 valve angle also as an upgrade. Heads and cam package at the buy it now is for a 4-bolt LS3 head assembled with PAC or Lunati springs and a billet custom Comp Cams camshaft. IMPORTANT: The head and cam combo is not guaranteed to produce 700 horsepower on your engine. This is dependent on cubic inch, compression ratio, RPM and other factors. However, this head and cam combo is guaranteed to bring near max power out of your engine! Contact Jerry at (785) 408-2911 or message through Ebay with questions or to discuss your engine goals. |
Cylinder Heads for Sale
700hp ls3 6-bolt head/cam combo (.750 lift solid roller cam: heads set for cam)(US $2,975.00)
New t&d roller rocker code h---1.800 ratio with 1.750 pivot length,straight(US $50.00)
New t&d roller rocker code n---2.10 ratio with 1.850 pivot length,left(US $50.00)
New t&d roller rocker code p---2.20 ratio with 1.850 pivot length,straight(US $50.00)
New jesel shaft roller rocker1.70 ratio with 1.750 pivot length(US $50.00)
New jesel shaft roller rocker1.75 ratio with 1.750 pivot length(US $50.00)
BMW X5 passes the Million mark
Wed, 09 Jun 2010The BMW X5. One million built since 1999 When we think of luxury SUVs we always think it started with the Range Rover. Which of course it did.
Honda Electric Sports car Concept at Tokyo & six more concepts too
Thu, 10 Nov 2011Honda Small Sports EV Concept at Tokyo Home Motor Shows are car makers’ favourites, so with the Tokyo Motor Show just round the corner Honda has revealed plans for seven concepts at the show including a small electric roadster and a plug-in hybrid – the Honda AC-X. Honda’s display at the Tokyo Show is going to be the biggest of any car maker. The headline act – certainly from a petrolhead’s point of view – is probably going to be Honda’s Small Sport EV Concept.
New BMW M3 and M4 engine secrets laid bare
Thu, 26 Sep 2013BMW's M division has lifted the veil of secrecy on the inline six-cylinder engine bound for its upcoming M3 sedan and new-to-the-range M4 coupe and convertible, revealing a potent twin-turbocharged 3.0-liter direct injection gasoline unit that produces an official 424 hp at 7,500 rpm and what officials describe as "significantly more than 369 lb-ft" of torque. The newly developed engine, known under the internal codename S55 B30, shares its 84.0 mm bore and 89.6 mm stroke with BMW's standard turbocharged 3.0-liter in-line six-cylinder direct-injection gasoline mill, the M55 used across the German car maker's lineup, endowing the aluminum block unit with an overall swept volume of 2,979 cc. This represents a sizeable 990 cc reduction on the engine BMW's M division's new unit replaces, the S65.