7days Timer With Romote Controle Suitable For Most Webasto /eberspacher Heaters on 2040-parts.com

 timer + remote control

                            

 

  General：   the ST-3 is timer and remote control module working in parallel connection，also it can working independence。

          

  Timer set：  1. Standard time setting：hold “time”，then push “minute”, “hour” or “week” to set to local time.

 

              2. Start and off time setting:

                 Push “timer” once, then it waiting you to input start time, you can input the time & week day by push “week”, ”hour”, “minute” to set the time you want to start the device.

                 Then push the “timer” again, it waiting you to input the off time, you can input the time & week day by push “week”, ”hour”, “minute” to set the time you want to turn off the device.

                 You can cancel the time you input by push “cancel” in the timer setting procedure and input again

                 After you are sure you have input the right start & off time, push “time” to store it.

                 In the end, you should push “state” several times to change the state, when the state display on the screen is “auto” & no “bulb” show, you have done and the timer is active.                 

              3. You can start or turn off the device at any time to push “state” to control the device manually

            

       caution：you may push “state” to change the timer working state.

                State on:( left), means manual start.

                State atuo:(middle) means timer is working

                State off:(left) means timer is off, working on remote control.

               Standard time setting, timer setting all should be insured you have input the right week day.

Otherwise the timer will output start & turn off time on wrong day.

 

 

Remote control：1. The remote control effective distance affected by environment, in theory it can work in 200m.

               2. You can test the handle battery by hold “on” for 2 second, the red LED flash.

               3. Push “on””key” to start the device, push “off””lock” to turn off the device.

               4. The handle send out control signal, then receiver confirm it and feedback, the blue LED on the handle flash to show you the order has been well carry out.

 

      caution：the battery in the handle is standard AAA, should be changed in 3 months

              the battery in the module can go on for 10 days after disconnecting power.

 

     Wire & data

tech data：power supply: DC12V（10V~15V），300mA.               Red: +,    Black: - or ground

                control output:12V level（0V，or 12V，200mA）        Brown

Many other products , watch the websit: 3w.heatercarparts.com