Find or Sell any Parts for Your Vehicle in USA

8 Rv Trailer Boat Camper Motorcoach Graphics Decal Kit -43 on 2040-parts.com

US $44.00
Location:

Hillsdale, Michigan, United States

Hillsdale, Michigan, United States
Condition:New Brand:decal Manufacturer Part Number:43

DESCRIPTION 
You are purchasing eight rv trailer boat motorcoach  decal kit -43

FEATURES

8- RV/Auto/Boat Graphics
This sale includes eight Decals, each decal pictured has a decal for each side.
These Decals are a mirror image for the right side and left side. .
Measurements (Measurement is at the thickest point of the decal, each decal is measured from top to bottom as pictured.)
Top decal: 48"wide x 1-3/4"
Second decal: 71-3/4"wide x 2-1/4"
Third decal: 27-1/2"wide x 1-1/4"
Bottom decal: 54"wide x 8"
Colors depicted: Metallic silver
All decals arrive on two backing sheets ready to cut and apply as you would like on surface.
Decals can be applied to any flat non-porous surface.
Decals are made from Premium Outdoor vinyl made to last 7-8 years

APPLICATION
Steps one and two: Unroll and Burnish
Lay your Vinyl Decal on a smooth, hard surface such as a tabletop, wall, or floor. Use a squeegee or a credit card to burnish the transfer tape to the vinyl graphic by rubbing over it with a very hard pressure. Now, flip it over and repeat on the back side. This will adhere the Transfer Tape to the Vinyl Decal well so that the backing paper will remove more easily.

Steps three and four: Position and Secure for the Top Hinge Method
Eyeball where you want to place your vinyl Decal, or use a measuring tape to determine the correct position. Use painter's tape to tack the vinyl decal in place on the top corners. If required, use a bubble level to check that the design is level by placing it on the 1/8" trim line that surrounds your decal. Adjust as necessary. once you have your Vinyl Decal installed on your surface you will not be able to move it to another position, so take the time to double check that your design is level and EXACTLY where you want it to stay!

Run a strip of Painter's tape across the top of the design, with half of the tape on the wall and half of the tape on the front of the decal. This is your "tape hinge". This Top Hinge Method works well for smaller vinyl decals (under 2") that can be applied by one person.

Step five and six: Flip, Remove, and Roll
Flip the decal up (like opening a door) and carefully peel the Backing Paper off from the hinged edge. Pull the Backing Paper back slowly at a 180-degree angle, using the flat of your hand to push the vinyl down onto the Transfer Tape as you slide the Backing Paper off. Avoid touching the adhesive on the Vinyl Decal if you can. If the decal wants to come with the Backing Paper, simply roll backward a bit and push the decal back down onto the Transfer Tape using the flat edge of your fingers while you pull back.

Once the Backing Paper is removed, slowly roll the Vinyl Decal down on the surface from the hinged edge. Use the Squeegee or the palm of your hand to smooth and secure the decal from the center outward.

Step Seven and Eight: Burnish and Peel
Use the squeegee to burnish the Vinyl Decal securely to the wall or surface with the Transfer Tape still in place. Slowly peel back the Transfer Tape form the top down, again at a 180-degree angle, taking care that the Vinyl Decal stays securely on the wall.

PAYMENT

We accept payment by PayPal.
Immediate payment is required.
For customers in Michigan(MI), applicable 6% sales tax will be applied during checkout.

SHIPPING

We ship within 1 business day, orders on saturday/sunday will be shipped on Monday.
All orders will be shipped USPS priority mail with Tracking 
We only ship to confirmed addresses 
Custom orders will require 2 days handling time
Please make sure you provide the correct address we will not refund for incorrect address at the time of purchase 
Please contact us for international shipping 

RETURNS

We offer a 14 day 100% money back guarantee
Buyer pays return shipping on all orders
We do not except returns on international orders

Our customer support team is available through eBay messages only
Please ask all questions prior to purchasing 

Concept Car of the Week: Mazda Ibuki (2003)

Fri, 21 Feb 2014

With the Ibuki, Mazda designers synthesized the most successful of the first generation MX-5's iconic elements and evolved their forms to make them even more memorable and simple. To do so, they used a strong geometric theme throughout the car inside and out: LED headlamps; front air intake; tail lamps; rear view mirrors; release handles and interior details down to the pedals – every shape follow the same oval theme. Zooming out, the silhouette – as well as the top view – is also oval, making the Ibuki look more like a toy than a car, which is a real bonus for a small roadster.

Mazda Miata roadster passes 900,000-built milestone

Fri, 04 Feb 2011

Mazda on Friday built its 900,000th MX-5 Miata, raising the bar on its Guinness World Record for best-selling two-seat sports car. The MX-5 Miata originally set the record in May 2000, when production reached 531,890 units. But the record was updated when production reached 700,000 units and again when production reached 800,000 units.

Caterham CDX Limited Edition: first pictures

Tue, 10 Jun 2008

By Dimitri Pesin First Official Pictures 10 June 2008 16:03 Caterham has returned to its K-series roots with a new version of its Seven, dubbed the CDX Limited Edition. Not a catchy moniker perhaps, but the new car has been built to commemorate 15 years of the Caterham Driving Experience (CDX) – the track days where you can drift or slalom a Seven. As well as the gloss black paint, plus decals along the sides mimicking the CDX cars, the big news is the return of the K-series powerplant delivering 135bhp through a five-speed ‘box.