Find or Sell any Parts for Your Vehicle in USA

84 85 86 87 88 89 90 Ford Bronco Ii 80 81 82 F100 15x6 Oem Steel Wheel Rim on 2040-parts.com

US $25.00
Location:

Tucson, Arizona, US

Tucson, Arizona, US
Returns Accepted:Returns Accepted Item must be returned within:30 Days Refund will be given as:Money Back Return shipping will be paid by:Buyer Return policy details:GENERAL RETURN POLICY: Returns only accepted within 30 days of purchase. No exceptions. Part is guaranteed fully functional or your money back. This does not include improper installation or incorrect interchange. Refund will be granted upon receipt of the defective part. NON DEFECTIVE RETURN POLICY: NON DEFECTIVE RETURNS MUST BE MADE WITHIN 30 DAYS OF PURCHASE, AND ARE SUBJECT TO 25% RESTOCKING FEE. RETURNS MADE ON NON-DEFECTIVE PARTS ARE NOT ELIGIBLE FOR A REFUND ON FREIGHT. ENGINE RETURN POLICY: Engines are guaranteed for thirty (30) days after date of receipt, and only when used under normal driving conditions. Used engines are warranted as long blocked (against cracked blocks, heads, flat cranks, and all internally lubricated components). Any abuse or lack of maintenance or overheating will void the warranty. A heat tab will be placed on all engines. Removal of the heat indicator tab voids the warranty. TRANSMISSION RETURN POLICY: Transmissions are warranted to work properly and guaranteed for 30 days. All warranties are contingent on the parts being properly installed to the manufacturer's recommendations. Any improper installation will void the warranty. Warranty is voided if the cooling lines and radiator are not flushed prior to installation. Not installing new filter will void any warranty. We do not warranty external sensors, solenoids, linkages, or leaking seals. AIR CONDITIONING COMPRESSOR RETURN POLICY: OUR STANDARD PARTS WARRANTY IS THIRTY DAYS. FOR THIS WARRANTY TO BE VALID ON AIR CONDITIONING COMPRESSORS, THE RECEIVER-DRYER MUST BE REPLACED AT THE TIME THE COMPRESSOR IS INSTALLED. THE RECEIVER-DRYER IS ALSO A FILTER, AND PREVENTS ANY DEBRIS OR CONTAMINATION THAT MAY BE PRESENT IN THE SYSTEM FROM DAMAGING THE NEW COMPRESSOR. PROOF OF PURCHASE AND/OR INSTALLATION OF A NEW RECEIVER-DRYER IS REQUIRED FOR ANY AIR CONDITIONING COMPRESSOR WARRANTY CLAIMS. Restocking Fee:No Rim Brand:Ford Manufacturer Part Number:Hollander number: 560-1161 sn 1223 Rim Material:Steel Rim Width:6 Rim Diameter:15 Number of Bolts:5 Bolt Pattern:5 on 4.5"

 

This auction is for the following item:

This is a used 15x6 Stock Steel Wheel

The backspacing is just under 4"

It is in good used condition for the age

There is some light surface rust on the face

I guarantee it to be straight and usable

Hollander number: 560-1161

It will fit:

Interchange Applications for 1161 Wheel
  1) Ford Truck-F100 1980-1982   15x6, steel, 4 slot, 4-1/2" BC [1161]
  2) Ford Bronco II 1984-1986   15x6, steel, base [1161]
  3) Ford Bronco II 1987   15x6, steel, base, 4 hole [1161]
  4) Ford Bronco II 1988-1990   15x6, steel, 4 hole [1161]

Interchange Notes for 1161
E0TZ1015D 
Ident: LM
15x6, 5 lug, 4-1/2"

84-90 Bronco II

80-82 F100, 5x4.5" Bolt Circle

Will also fit early Rangers, although this exact

wheel was never an option for Rangers from the Factory

NOTE:

IN 80-82, FORD OFFERED TWO DIFFERENT

BOLT CIRCLES IN F100 TRUCKS. THIS FITS

THE 5 ON 4.5" BOLT CIRCLE

It is the buyer's responsibility to determine

if this part will fit his/her vehicle

NON DEFECTIVE RETURN POLICY:
 
NON DEFECTIVE RETURNS MUST BE MADE WITHIN 30 DAYS OF PURCHASE, AND ARE
SUBJECT TO 25% RESTOCKING FEE. RETURNS MADE ON NON-DEFECTIVE PARTS ARE
NOT ELIGIBLE FOR A REFUND ON FREIGHT OR SHIPPING.

Questions? Not what you're looking for?

Please contact us if you need something else.
_____________________________________________________

INTERNATIONAL CUSTOMERS: International shipping via

USPS is NOT available at this time.

_____________________________________________________

 

All sales with in Arizona will be charged sales tax.

 

We accept Visa / MasterCard.

We are a company that takes your business seriously.
We will answer your emails and calls as
soon as possible during our regular business hours.
We will leave good feedback for you upon
completion of successful Ebay transactions only.

 

We recycle wrecked Pickup Trucks, 4x4's, and SUV's.
From Engines and transmissions to wiring harnesses and door parts.
Steering and suspension parts to lighting assemblies and dash components.
Emission controls and body parts to bumpers and seats.
We stock parts that other yards throw away.
  • Our address is:

    Ace Pickup Parts
    9110 S. Eisenhower rd.
    Tucson Az, 85706

    Call us toll-free at:
    (888).862.4ACE (4223)
    or
    (520).889.9000
    Or fax us at:
    (520).889.5000

    And Remember Our
    Hours of Operation:
    8:00 AM till 5:00 PM
    Monday through Friday
    Closed Weekends

     




  •  

    Tesla Model S UK Prices – starts at £54,900

    Tue, 12 Nov 2013

    Tesla Model S UK Prices – starts at £54,900 We’d always expected the appealing Tesla Model S EV to cost at least £60k for the entry-level model, so it’s a pleasant surprise that you’ll be able to grab the 60kWh model with its (up to) 240 mile range for £49,900 after the UK taxpayer has chipped in a £5,000 bribe to get you to drive an EV. Even the range-topping Model S Performance with its 310 mile range, 416bhp and a very rapid 0-62mph of 4.2 seconds will only cost £68,700 (after £5k rebate). That’s almost a bargain, especially if you get your model S courtesy of your business.

    Convertible prices down – time to buy

    Wed, 18 Nov 2009

    Now is the best time to buy a convertible Traditionally, the end of the year has seen a big drop in the price of convertibles. Conversely, the Spring always sees a price rise. Which in the past always made sense. After all, who wants to be driving round in a drafty, cold soft-top when winter bites?

    Webinars: Incorporating Autodesk Maya into your Alias Workflow

    Fri, 20 Jan 2012

    How to incorporate Autodesk Maya into your Alias Workflow was the latest complimentary webinar brought to you by Autodesk and Car Design News. The webinar focused on examining the benefits of using polygon modeling for concept development. In particular it focused on the unique interaction that is possible between Autodesk Maya 2012 and Alias Automotive 2012, whilst exploring the workflow that moves data between both applications.