Find or Sell any Parts for Your Vehicle in USA

87-96 Ford F150 Bronco 3.55 Ratio 8.8 Ring Rear End Axle With Abs S844f on 2040-parts.com

US $350.00
Location:

Tucson, Arizona, US

Tucson, Arizona, US
Returns Accepted:Returns Accepted Item must be returned within:30 Days Refund will be given as:Money Back Return policy details:GENERAL RETURN POLICY: Returns only accepted within 30 days of purchase. No exceptions. Part is guaranteed fully functional or your money back. This does not include improper installation or incorrect interchange. Refund will be granted upon receipt of the defective part. NON DEFECTIVE RETURN POLICY: NON DEFECTIVE RETURNS MUST BE MADE WITHIN 30 DAYS OF PURCHASE, AND ARE SUBJECT TO 25% RESTOCKING FEE. RETURNS MADE ON NON-DEFECTIVE PARTS ARE NOT ELIGIBLE FOR A REFUND ON FREIGHT. ENGINE RETURN POLICY: Engines are guaranteed for thirty (30) days after date of receipt, and only when used under normal driving conditions. Used engines are warranted as long blocked (against cracked blocks, heads, flat cranks, and all internally lubricated components). Any abuse or lack of maintainence or overheating will void the warranty. A heat tab will be placed on all engines. Removal of the heat indicator tab voids the warranty. TRANSMISSION RETURN POLICY: Transmissions are warrented to work properly and guaranteed for 30 days. All warranties are contingent on the parts being properly installed to the manufacturer's recommendations. Any improper installation will void the warranty. Warranty is voided if the cooling lines and radiator are not flushed prior to installation. Not installing new filter will void any warranty. We do not warranty external sensors, solenoids, linkages, or leaking seals. AIR CONDITIONING COMPRESSOR RETURN POLICY: OUR STANDARD PARTS WARRANTY IS THIRTY DAYS. FOR THIS WARRANTY TO BE VALID ON AIR CONDITIONING COMPRESSORS, THE RECEIVER-DRYER MUST BE REPLACED AT THE TIME THE COMPRESSOR IS INSTALLED. THE RECEIVER-DRYER IS ALSO A FILTER, AND PREVENTS ANY DEBRIS OR CONTAMINATION THAT MAY BE PRESENT IN THE SYSTEM FROM DAMAGING THE NEW COMPRESSOR. PROOF OF PURCHASE AND/OR INSTALLATION OF A NEW RECEIVER-DRYER IS REQUIRED FOR ANY AIR CONDITIONING COMPRESSOR WARRANTY CLAIMS. Return shipping will be paid by:Buyer Restocking Fee:No Manufacturer Part Number:S844F Interchange Part Number:435-01492D Other Part Number:sn 0140 Placement on Vehicle:Rear Warranty:Yes Part Brand:Ford

NOTE:

THIS WILL NOT FIT "LIGHTNING" MODELS

ON 4X4 VEHICLES, FRONT AND REAR AXLE RATIOS

MUST MATCH OR SERIOUS DRIVETRAIN DAMAGE WILL OCCUR.

PLEASE CONTACT US AT

TOLL FREE: 888-862-4223

IF YOU HAVE ANY QUESTIONS


 

This auction is for the following item:

This is a used Axle Assembly

From a 1994 Ford F150 Pickup

3.55 Ratio, Non-Locking, 8.8 Ring Gear, With ABS

Tag number: S844F

The donor truck had 163k miles on it

It is in good used condition

The truck was running/driving when we got it in

Everything drove ok when we took it down the road

No excessive noise, no vibration, no indications of malfunction

Oil looked great when we drained it, gears looked good

I guarantee it to be usable

I do not guarantee any sensors, seals, or brake components.

Hollander number 435-01492D

It will fit:

Interchange Applications for 435-1492D Axle Assembly, Rr
  1) Ford Truck-F150 1987-1992   ABS, 3.55 ratio [1492D]
  2) Ford Truck-F150 1993-1995   exc. Lightning, tag S845D & S845M; ABS, 3.55 ratio [1492D]
  3) Ford Truck-F150 1996   ABS, 3.55 ratio [1492D]
  4) Ford Bronco 1987-1996   ABS, 3.55 ratio [1492D]
Ident: S807D '87-89, locking
Ident: S808D '87-89, non-locking
Ident: S809S '87-89, locking
Ident: S810S '87-89, non-locking
Ident: S814P '87-89, non-locking
Ident: S817P '87-89, locking
Ident: S837A '89-96, locking
Ident: S837B '90-96, locking
Ident: S837F '90-96, locking
Ident: S837J '90-96, locking
Ident: S837M '90-96, locking
Ident: S838A '89-96, non-locking
Ident: S838B '90-96, non-locking
Ident: S838F '90-96, non-locking
Ident: S838J '90-96, non-locking
Ident: S838M '90-96, non-locking
Ident: S844F '90-96, non-locking
Ident: S847A '89, from 5/89, locking
|A|, |B|, |C| & |E| interchange difference is ratios.
3.55 ratio, w/ABS.

Non-Exact Interchange Notes for 435-1492
|A| thru |K| interchange difference is ratios and ABS.
Front and rear ratios must match to avoid drive train damage.
Ford WDR non-locking, 8.8 ring gear semi-float axle.
Ford WFL locking, 8.8 ring gear semi-float axle.
Driveshaft flanges on rear axle vary '87-89 (cup) & '90-96 (disc).
Assembly includes brake drums.
This interchange contains both locking & non-locking axles.

Below items are non-exact interchange applications
NOTES for 1492H
  5) Ford Truck-F150 1993-1995   exc. Lightning, tag S845D & S845M; w/o ABS; (Canada mkt), 3.31 ratio [1492H]
  6) Ford Truck-F150 1996   w/o ABS; (Canada), 3.31 ratio [1492H]
Ident: S832E '94-96, non-locking
Ident: S832F '94-96, non-locking
Ident: S832J '94-96, non-locking
Ident: S832M '94-96, non-locking
Ident: S833E '94-96, locking
Ident: S833F '94-96, locking
Ident: S833J '94-96, locking
Ident: S833M '94-96, locking
|A|, |B|, |D| & |E| fit; difference is ABS and ratios.
|C| fits; difference is ABS.
|F|, |G|, |J| & |K| interchange difference is ratios.
3.31 ratio, w/o ABS.

NOTES for 1492K
  7) Ford Truck-F150 1987-1992   w/o ABS; (Canada mkt), 4.10 ratio [1492K]
  8) Ford Bronco 1987-1992   w/o ABS; 4.10 ratio [1492K]
Ident: S815D '87-89
Ident: S844A '89, from 5/89
|A| thru |D| fit; difference is ABS and ratios.
|E| fits; difference is ABS.
|F| thru |J| interchange difference is ratios.
4.10 ratio, locking axle only., w/o ABS.

NOTES for 1492A
  9) Ford Truck-F150 1987-1992   ABS, 2.73 ratio [1492A]
  10) Ford Truck-F150 1993-1995   exc. Lightning, tag S845D & S845M; ABS, 2.73 ratio [1492A]
  11) Ford Truck-F150 1996   ABS, 2.73 ratio [1492A]
Ident: S842A '90-96, non-locking
Ident: S842B '90-96, non-locking
Ident: S842F '90-96, non-locking
Ident: S842J '90-96, non-locking
Ident: S842M '90-96, non-locking
|B| thru |E| interchange difference is ratios.
2.73 ratio, non-locking only, w/ABS.

NOTES for 1492B
  12) Ford Truck-F150 1987-1992   ABS, 3.08 ratio [1492B]
  13) Ford Truck-F150 1993-1995   exc. Lightning, tag S845D & S845M; ABS, 3.08 ratio [1492B]
  14) Ford Truck-F150 1996   ABS, 3.08 ratio [1492B]
  15) Ford Bronco 1987-1996   ABS, 3.08 ratio [1492B]
Ident: S805D '89, locking
Ident: S806D '87-89, non-locking
Ident: S835A '89-96, locking
Ident: S835B '90-96, locking
Ident: S835F '90-96, locking
Ident: S835J '90-96, locking
Ident: S835M '90-96, locking
Ident: S836A '89-96, non-locking
Ident: S836B '90-96, non-locking
Ident: S836F '90-96, non-locking
Ident: S836J '90-96, non-locking
Ident: S836M '90-96, non-locking
|A|, |C|, |D| & |E| interchange difference is ratios.
3.08 ratio, w/ABS.

NOTES for 1492J
  16) Ford Truck-F150 1987-1992   w/o ABS; (Canada mkt), 3.55 ratio [1492J]
  17) Ford Truck-F150 1993-1995   exc. Lightning, tag S845D & S845M; w/o ABS; (Canada mkt), 3.55 ratio [1492J]
  18) Ford Truck-F150 1996   w/o ABS; (Canada), 3.55 ratio [1492J]
  19) Ford Bronco 1987-1996   w/o ABS; 3.55 ratio [1492J]
Ident: S807D '87-89, locking
Ident: S808D '87-89, non-locking
Ident: S809S '87-89, locking
Ident: S810S '87-89, non-locking
Ident: S814P '87-89, non-locking
Ident: S817P '87-89, locking
Ident: S837A '89-96, locking
Ident: S837B '90-96, locking
Ident: S837F '90-96, locking
Ident: S837J '90-96, locking
Ident: S837M '90-96, locking
Ident: S838A '89-96, non-locking
Ident: S838B '90-96, non-locking
Ident: S838F '90-96, non-locking
Ident: S838H '90-96, non-locking
Ident: S838J '90-96, non-locking
|A|, |B|, |C| & |E| fit; difference is ABS and ratios.
|D| fits; difference is ABS.
|F|, |G|, |H| & |K| interchange difference is ratios.
3.55 ratio, w/o ABS.

NOTES for 1492C
  20) Ford Truck-F150 1993-1995   exc. Lightning, tag S845D & S845M; ABS, 3.31 ratio [1492C]
  21) Ford Truck-F150 1996   ABS, 3.31 ratio [1492C]
Ident: S832E '94-96, non-locking
Ident: S832F '94-96, non-locking
Ident: S832J '94-96, non-locking
Ident: S832M '94-96, non-locking
Ident: S833E '94-96, locking
Ident: S833F '94-96, locking
Ident: S833J '94-96, locking
Ident: S833M '94-96, locking
|A|, |B|, |D| & |E| interchange difference is ratios.
3.31 ratio, w/ABS.

NOTES for 1492E
  22) Ford Truck-F150 1987-1992   ABS, 4.10 ratio [1492E]
  23) Ford Bronco 1987-1992   ABS, 4.10 ratio [1492E]
Ident: S815D '87-89
Ident: S844A '89, from 5/89
|A| thru |D| interchange difference is ratios.
4.10 ratio, locking axle only., w/ABS.
Locking axle only.

NOTES for 1492F
  24) Ford Truck-F150 1987-1992   w/o ABS; (Canada mkt), 2.73 ratio [1492F]
  25) Ford Truck-F150 1993-1995   exc. Lightning, tag S845D & S845M; w/o ABS; (Canada mkt), 2.73 ratio [1492F]
  26) Ford Truck-F150 1996   w/o ABS; (Canada), 2.73 ratio [1492F]
Ident: S842A '90-96, non-locking
Ident: S842B '90-96, non-locking
Ident: S842F '90-96, non-locking
Ident: S842J '90-96, non-locking
Ident: S842M '90-96, non-locking
|A| fits; difference is ABS.
|B| thru |E| fit; difference is ABS and ratios.
|G| thru |K| interchange difference is ratios.
2.73 ratio, non-locking only, w/o ABS.

NOTES for 1492G
  27) Ford Truck-F150 1987-1992   w/o ABS; (Canada mkt), 3.08 ratio [1492G]
  28) Ford Truck-F150 1993-1995   exc. Lightning, tag S845D & S845M; w/o ABS; (Canada mkt), 3.08 ratio [1492G]
  29) Ford Truck-F150 1996   w/o ABS; (Canada), 3.08 ratio [1492G]
  30) Ford Bronco 1987-1996   w/o ABS; 3.08 ratio [1492G]
Ident: S805D '89, locking
Ident: S806D '87-89, non-locking
Ident: S835A '89-96, locking
Ident: S835B '90-96, locking
Ident: S835F '90-96, locking
Ident: S835J '90-96, locking
Ident: S835M '90-96, locking
Ident: S836A '89-96, non-locking
Ident: S836B '90-96, non-locking
Ident: S836F '90-96, non-locking
Ident: S836J '90-96, non-locking
Ident: S836M '90-96, non-locking
|A|, |C|, |D| & |E| fit; difference is ABS and ratios.
|B| fits; difference is ABS.
|F|, |H|, |J| & |K| interchange difference is ratios.
3.08 ratio, w/o ABS.


WHILE THIS WILL FIT ALL THE VEHICLES MENTIONED,

RATIOS AND BRAKE CONFIGURATION MAY DIFFER

DEPENDING ON FEATURES OF YOUR TRUCK.

NOTE:

THIS WILL NOT FIT "LIGHTNING" MODELS

ON 4X4 VEHICLES, FRONT AND REAR AXLE RATIOS

MUST MATCH OR SERIOUS DRIVETRAIN DAMAGE WILL OCCUR.

It is the buyer's responsibility to determine

if this part will fit his/her vehicle

NON DEFECTIVE RETURN POLICY:
 
NON DEFECTIVE RETURNS MUST BE MADE WITHIN 30 DAYS OF PURCHASE, AND ARE
SUBJECT TO 25% RESTOCKING FEE. RETURNS MADE ON NON-DEFECTIVE PARTS ARE
NOT ELIGIBLE FOR A REFUND ON FREIGHT OR SHIPPING.

Questions? Not what you're looking for?

Please contact us if you need something else.
_____________________________________________________

 

NOTE: SHIPPING ON THIS ITEM IS NOT FREE
PLEASE CONTACT US FOR A FREIGHT QUOTE
BEFORE BUYING!!!

NOTE: We also have courier service to businesses in Phoenix.
Contact us for a shipping quote!

International Customers:
International shipping
NOT available at this time
_____________________________________________________

 

All sales with in Arizona will be charged sales tax.

 

We accept Visa / MasterCard.

We are a company that takes your business seriously.
We will answer your emails and calls as
soon as possible during our regular business hours.
We will leave good feedback for you upon
completion of successful Ebay transactions only.

 

We recycle wrecked Pickup Trucks, 4x4's, and SUV's.
From Engines and transmissions to wiring harnesses and door parts.
Steering and suspension parts to lighting assemblies and dash components.
Emission controls and body parts to bumpers and seats.
We stock parts that other yards throw away.
  • Our address is:

    Ace Pickup Parts
    9110 S. Eisenhower rd.
    Tucson Az, 85756

    Call us toll-free at:
    (888).862.4ACE (4223)
    or
    (520).889.9000
    Or fax us at:
    (520).889.5000

    And Remember Our
    Hours of Operation:
    8:00 AM till 5:00 PM
    Monday through Friday
    Closed Weekends

     




  •  

    Axle Parts for Sale

    Motorists Worry About Safety On The School Run

    Fri, 29 Aug 2014

    AS THE start of new school term approaches, the latest research from BCA, a leading vehicle remarketing company, reveals the pressures faced by parents - and other motorists - on school run routes. Both parents and non-parents were surveyed and with nearly half (45%) of non-parents saying they drive by schools or use the same route as parents dropping off their children, it's clear that school runs create some significant pinch-points. Key findings: 46% of all motorists believe parents drive their children to school because it takes too long to walk 30% of non-parents believe children demand to be driven to school, compared to just 17% of parents Over a third (38%) of all motorists think unreliable public transport prompts parents to drive children to school More than half (57%) of motorists see illegal parking outside of school gates 44% of have seen parents and children not looking at oncoming traffic when opening car doors Both parents and non-parents were most in favour of schools creating drop-off areas to tackle congestion and parking issues during the school run at 52% and 57% respectively 29% of parents think police officers should be on patrol to tackle parking issues during the school run Parents in Northern Ireland are most likely to drive their children to school, topping the list at 51%, followed by families in the North East and West Midlands at 39%.

    Los Angeles, Miami on 2014 Formula E schedule

    Fri, 08 Mar 2013

    Today Formula E, the open-wheel world championship for electric cars sanctioned by the FIA, released a preliminary list of eight cities across the globe where races will be held: London, Rome, Los Angeles, Miami, Beijing, Putrajaya (Malaysia), Buenos Aires and Rio de Janeiro. Rome and Rio de Janeiro had been announced earlier, but the rest of the cities are new to the schedule. All courses will be run on city streets in downtown locations accessible to public transportation, according to a release by Formula E Holdings, the organization putting on the series.

    College Exhibition: Scuola Politecnica di Design Show

    Wed, 10 Aug 2005

    Masters students on the Transportation Design course at Scuola Politecnica di Design in Milan, Italy have recently displayed the results of a project done in collaboration with Lamborghini. Twenty students were faced with the delicious task of reinterpreting the legendary Espada, the four-seater front-engined GT designed by Gandini under Bertone in 1968. Guided by Professor Marco Bonetto, the project spanned one year and included the active involvement of Walter De'Silva, Director of Design for Audi Brand Group (Audi, SEAT, Lamborghini), and Luc Donckerwolke, Design Director of Lamborghini.