88-91 Honda Civic Crx Dpfi To Mpfi Harness Conversion Dx To Si on 2040-parts.com

Easy to install only deal with 4 wires that go to your ECU.

Remember this is a OBD-0 Dx harness converted to MPFI 4 injectors...

Go from 2 injectors to 4: Adds HP and TQ

Fits: DX  & LX (DPFI) models only 88-91 Civic or Crx

What engines are compatible with this harness? D15's non v-tec*D16's non v-tec*B18A/b & B20B/Z as long as you use OBD-0 components.    

New detachable sub harness for easy removal so no wires have to be cut.                                                          

Will also work for: D15B/D16Z6 v-tec *B16's*B17*B18C's*H-Series also but you will need some rewiring done and use of jumper harness for OBD-1 engines. If you need any of these harnesses made for your swap it will be at extra cost $$$ so make sure to leave me all info needed and I will give you a price quote.

I can make these harnesses for both automatic or manual set ups. Let me know what set up you have Automatic/Manual transmission.

What does it come with? Complete MPFI harness. Will not come with injector resistor box. If you need the injector resistor box it will be at extra cost.

Add $20 more to your payment if you want injector resistor box.

I make these harnesses on a purchase basis so make sure you give me correct information so that I can make you the right application for your set up.

INFORMATION NEEDED:  -->>  Year/Make/Model what Engine and (ECU) will you be using?

I make these harnesses for a couple performance shops and I make these once purchased so that I can make sure that I can get you the right set up for your needs. I solder and heat shrink all connections for perfect contact and to prevent moisture and corrosion. I also use new loom for nice clean look,  I will provide you with a detailed diagram. I don't leave no excessive amount of wiring and don't use a bunch of tape. I like to make these harnesses as if they were going into my own car, this is a clean fitted harness and no long wires hanging. Now you can actually pop your hood and be proud to show off your swap.

Yes it's a plug-N- play no cutting required. You cannot use a SI harness it will not work, the wiring set up is totally different save your self the trouble and time.

I can also make the following: Engine harness tucks, V-tec sub harness, 1 wire o2 to 4 wire o2 conversion, knock sensor, secondary o2 sensor, IABs for gsr or H22's, 88-91 obd-1 D16z6/D15b conversion and more check with me for other harness wire ups.

EXTRAS: I have OBD-O/OBD-1/OBD-II ecu's, harness clips/plugs, injector resistor boxes, ecu harness plugs OBD-O/OBD-1/OBD-II.  I also do harness repairs of all types. Ask me if you are interested in any of these items.

NOTICE:

* Please send payment in full within 1-3 days when sold otherwise item will be re-listed.

* When I ship this item out I will then contact you with confirmation/tracking # for your convenience.

* The sooner you pay the sooner you will receive.

* Serious bidder's only please.

*Please make sure this is what you need cause refunds will not be issued so make sure to give all necessary info or ask questions if you are unsure about this conversion.

* International shipping will have 2 options of shipping services...

1st option will be priority shipping 6-10 business days to receive with no tracking # and no guarantees if package is lost or damaged.

2nd option will be express shipping 3-5 business days with tracking # and insurance included. I recommend you look into express shipping so that you get a tracking # and you can see the status on your delivery.

* Once purchased and received feel free and contact me if you have any trouble installing the harness, I will help you to get to where you need to be. If you plan on leaving negative feedback please let me know what the problem is and I will correct it if it's something I did. Thank you!!!

Check out my other items!

"Thanks for viewing this item".