Brand:Nissan
Warranty:Yes
Manufacturer Part Number:Nissan Maxima 3.0L V6 VG30E
Country/Region of Manufacture:Japan
Other Part Number:Nissan Maxima Transmission JDM VG30E Transmission
Interchange Part Number:Nissan Maxima Transmission JDM VG30DE VG30
Placement on Vehicle:Front
For Shipping Quote To Lower 48 States And AK, HI, PR Or Out Of Country Please Contact Us Toll Free : 1-888-986-2880 / Above Mentioned Emails ***
ALN JDM Auto Motors is one the largest JDM Low Mileage Engines & Transmissions Importer!!!
We have a large inventory of JDM SOHC, DOHC, VTEC, NON VTEC, i-VTEC, SUPERCHARGED, TURBO CHARGED, KLZE, ROTORY, ETC. in Stock at the competitive low prices! THIS AUCTION IS FOR A USED 89-94 NISSAN MAXIMA 3.0L SOHC V6 AUTOMATIC TRANSMISSION JDM VG30E
PLEASE NOTE: WE HAVE A LARGE QUANTITY OF LOW MILEAGE JDM ACURA/ HONDA, NISSAN / INFINITI, TOYOTA / LEXUS, MAZDA, MITSUBISHI ENGINES AND TRANSMISSIONS IN STOCK AT VERY LOW COMPETITIVE PRICES AVAILABLE
MILEAGE IS BETWEEN 49-65K
THIS TRANSMISSION WE HAVE IN STOCK WAS REMOVED FROM A RUNNING NISSAN VEHICLE IN JAPAN AND IMPORTED TO US DIRECTLY!!!
IT COMES WITH 30 DAYS START UP WARRANTY & 100% CUSTOMER SATISFACTION GUARANTEED !!!
PLEASE CHECK THE CODE ON YOUR STOCK TRANSMISSION FOR PROPER FITMENT BEFORE BIDDING ON THIS ITEM, ALSO BE ADVISED THAT THESE ARE JDM IMPORTED TRANSMISSION AND YOU MIGHT HAVE TO USE SOME EXTERNAL PLUGS, SENSORS OFF YOUR STOCK USDM OR US MODEL TRANSMISSION FOR PROPER USE / FITMENT". IF YOU ARE USING THIS TRANSMISSION IN ANY OTHER VEHICLE THAN NISSAN MAXIMA, PLEASE DO YOUR RESEARCH...
" PLEASE DO YOUR RESEARCH PRIOR TO PURCHASING, WE WILL NOT BE RESPONSIBLE IF IT IS NOT COMPATIBLE OR DOES NOT FIT IN YOUR VEHICLE / CAR "
*** FREE SHIPPING APPLIES ONLY TO LOWER 48 STATES, EXCEPT AK, HI, PR, VI. *** *** SHIPPING TO AK, HI, PR & VI PLEASE CONTACT US OR EMAIL YOUR INFO FOR ACCURATE RATE / SHIPPING QUOTE *** PAY PAL
***ALL MAJOR CREDIT CARDS ACCEPTED*** AMEX
DISCOVER
DINNERS CLUB
MASTER CARD
VISA
WE ALSO WELCOME AND ACCEPT,
BANK WIRE TRANSFER / TT CASHIER / CERTIFIED CHECK COD FOR LOCAL DELIVERIES
CASH ON PICK UP
***SAMPLE PICTURE
SHOWN***
*** YOU WOULD RECEIVE A SIMILAR TRANSMISSION AS SHOWN ***
ALN JDM Auto Motors offers 30 days start up warranty on any non performance engines, transmissions and brand new Ignition Distributors. Any Performance engines such as Vtec/ i-Vtec, Turbocharged, Supercharged, Mazda Klze (Excluding Rotory & Diesel Engines)comes with 14 days start up warranty.
All Mazda Rotory such as 13B Turbo II,13B Twin Turbo, 20B 3 Rotors, 13B-RE are (SOLD AS IS). We make sure they are not Ceased up or Locked before selling it.
All Accessories and other body parts such as Steering Wheels, Clusters, Floor Mats, Seats, Rims, Ecu, Maf Air Flow Sensors, Nose cuts Etc. are also (SOLD AS IS)
Warranty does not cover any External Parts or Accessories on the Engines and Transmissions such as Distributor, Distributors' cap / cover, Intake Manifold, Exhaust Manifold, Oil Pan, Solenoids, Wiring Harness, Plugs, Sensors, Belts, Etc. Which in most cases needs to be changed / swapped over from your stock Engine or Transmission any way.
"Also in most cases you have to use these JDM engines as Long Block Only because they are out of Right Hand Drive Cars in Japan".
ALN JDM Auto Motors, Will not be responsible for any improper installation on our products, it must be installed by ASE Certified Mechanic. Any costs associated with repairs or replacements, including labors, installations or any other related costs, shipping charges would not be covered under warranty. We ask our respected customers to contact us with any problems or concerns about our products within 14 days from the date of purchase on the original invoice.
If the Product has been altered in any way, improperly installed, or not used for its' intended purpose,warranty will be voided.
In the unlikely situation of our products being defective / bad you need to contact us first with a letter / document from your Certified Mechanic as a proof that way we give you a RMA number(Return Merchandise Authorization) then you could ship it back to us, other wise the shipment is going to be refused here at our establishment at customers' own expense.
Exchange is only offered if our product is bad, again we would require a written document from your ASE Certified Mechanic proofing it. For any other reason if a customer refuse or return our products there will be a 25% restocking fees plus both ways shipping.
Shipping & Handling
ALN JDM Auto Motors offers its' Customers with the Lowest Shipping Charges possible both Domestic & International!!! We use several different Freight Companies to get the best and lowest price on shipping.
Dear Customers, In order to provide you with an accurate shipping rate please contact us with your complete address where it is shipping to by calling at: 972-986-2886 / 469-500-0301 or Email us at: info jdmautomotors com alnjdmautomotors gmail com
Domestic & Canadian shipments Estimated Time of Delivery is between 2-10 business days by Freights.
International shipments are by Ocean Freight to the nearest Ocean Port of Discharge and Estimated Time of Delivery is between 4-8 weeks.
Attention Customers:
We at ALN JDM Auto Motors do our best to ship your orders by packaging and putting it on the skids on big shipment as safe as possible free of any damage leaving our warehouse, but since we don't do the shipping and handling part ourselves there fore we ask our Respected Customers to please check everything when receiving it by freight company and make sure there is no sign of damage, if you see anything please make a note of it on the Bill Of Lading before signing to receive it from Freight Company's drivers.
That way it makes it easier to do a claim with Freight Company for any damages.
Thank you! We appreciate your business!!!
|
Complete Auto Transmissions for Sale
Wed, 11 Aug 2004
Students at Sweden's Ume? University Institute of Design presented their work in the annual Degree Show in June, which included work from the Masters programmes in Transportation Design, Advanced Product Design, and Interaction Design along with the final thesis projects from the Bachelor level graduates. Go to Photo Gallery250 photos
The degree students from the three year bachelor programme showed their 10 week final degree projects in Industrial Design, and the two year Masters Programmes presented their 20 week final degree works.
Fri, 29 Mar 2013
A lot of people complain about the fact that the future started years ago, and, yet, no one’s produced a viable flying car. That disappointment is misplaced. The real tragedy is that Mazda never mass produced the suitcase car.
Tue, 22 Oct 2013
BMW M235i leaks out ahead of 2 Series debut
BMW started the tease for the new 2-Series over the weekend with a ver brief video, and are planning on debuting their replacement for the 1 Series Coupe at the end of the week. But car makers best laid plans usually go awry now the world has smartphone cameras and the Interwebs are beckoning, so it’s no big surprise we have the first photo of a new 2-Series – in this case the M235i – ahead of its official reveal. Snapped at a dealer presentation by a member of 2addicts forum, the new 2 Series looks pretty much like the 1-Series from the front with a coupe roof sloping down to a new back end.
2040Parts.com © 2012-2024. All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.
Use of this Web site constitutes acceptance of the 2040Parts User Agreement and Privacy Policy.
0.034 s, 11771 u
|