9" Stainless Steel Shrinking Disc Planishing Hammer, English Wheel on 2040-parts.com
Lakewood, Ohio, US
The 9" diameter Shrinking Disc is for use on 7" & 9" grinders,air and electric & buffers with 5/8"-11 spindles that use a 7/8 o.d. nut the most common size Made from 16 gage .062 304 Stainless Steel stamped for flatness and balance with a 90° turned up outer lip for added rigidity and saftey. they also work excellent on removing those "oil can" dents that you have Once you have started using the shrinking disc and get a little practice under your belt, it will !Stronger than others, Guaranteed! If your not satisfied and/or you find the competitors better,
Shrink stretched or damaged metal panels by appling concentrated heating through surface contact friction generated between the disc and a clean body panel.
The panel area worked with the disc and rapidly cooled with water or commpresed air will shrink down the high points.
These shrinking discs work on steel or aluminum but we do not suggest swithcing from steel to aluminum without dressing the disc with 150 grit sand paper on a block so as not to imbed steel into an aluminum panel and causing corrosion issues down the road.
overworked and stretched the metal too much!
make you feel more confident in your metalworking skills when you can finish a panel with no
body filler at all.
Repeat the process as needed to work the panel flat and level.
The shrinking disc will smooth out damaged surfaces, and try it on dressed out, butt welded seams. Learn to use virtually no fillers, the thinner the filler the longer the repair will last, panels can be worked so smooth the a high build filler primer is all that is needed to be ready for paint.The surface to be repaired must be dollied up level or slightly higher for this form of shrinking to work properly. Also offered in a 4.5" diameter model.
then send it back and I will give you a refund! No one else offers this!
Other Tools for Sale
4 1/2" stainless steel shrinking disc english wheel planishing hammer(US $25.70)
4 1/2" & 9" shrinking disc combo english wheel planishing hammer(US $58.70)
Compact design automotive brake fluid tester w/ 4 led 180° testing rod buzzer(US $28.90)
2-in-1 infrared ir laser & k-type sensor thermometer thermocouple temperature(US $36.90)
Spindle nut (dorman #615-144)(US $22.25)
Bench mount head assem. tool, dune buggy vw baja bug(US $43.99)
Video: BMW on its haptic technology design
Tue, 07 May 2013BMW has released a video revealing the intense work that goes into developing its haptic technology. Haptics – the way something feels – provide important feedback to drivers, making it essential to develop high-quality technology. To ensure this happens the Haptics team is involved from the start of the design process to maintain the high standards BMW is known for.
Lamborghini Aventador J at 2012 Geneva motor show
Mon, 05 Mar 2012There maybe other Italian sports car manufacturers looking to hog the limelight at the 2012 Geneva motor show (and Ferrari and its 730bhp F12 is one of them) but Lamborghini will vie for attention with the Aventador J. A two-seat, open top speedster based on the Aventador LP700-4, it has some intriguing bits of carbonfibre tech and highly individual design. Named 'J' after the FIA’s Appendix J that governs the tech spec of race cars in certain classes, it’s proper bedroom wall material – but little boys and girls are unlikely to ever see it on the road as it’s a one-off and will go to a lucky owner after its appearance at Geneva.
Nissan Murano CrossCabriolet: Official
Mon, 15 Nov 2010The Nissan Murano CrossCabriolet - the world's first soft-top SUV You had plenty of notice. We told you in April that Nissan were building a Murano convertible, and in August we told you that we had confirmation from the horse’s mouth that the Nissan Murano CrossCabriolet was going to happen, and that the LA Motor Show was where we’d get to see the Nissan Murano CrossCabriolet for ourselves. And they weren’t telling porkies.