Find or Sell any Parts for Your Vehicle in USA

91-97 Dodge Chrysler 232 3.8l Ohv V6 Rod Bearings Std 010 020 on 2040-parts.com

US $29.95
Location:

Portland, Oregon, United States

Portland, Oregon, United States
Condition:New Warranty:Yes Interchange Part Number::1920RA Part Brand::Enginetech Manufacturer Part Number:BCxxx Competitive Interchange::CB-1410P Brand:Enginetech

TOP QUALITY PARTS --  AMAZING PRICE -- FAST SHIPPING --  PERFORMANCE -- TOP QUALITY -- CALL US!!!

 

APPLICATION:
1991-2007 Dodge Chrysler 232 3.8L OHV V6
*1991-1993 Chrysler New Yorker / Imperial
*1994-2007 Dodge Grand Caravan
*1994-2007 Chrysler Town & Country
*1994-2007 Chrysler/Plymouth Voyager
*2004-2007 Chrysler Pacifica
 
2007-2010 Jeep 232 3.8L OHV V6
*2007-2010 Jeep Wrangler
 
 
 
THIS LISTING WILL INCLUDE:
(.25mm=.010", .50mm=.020")
  • CONNECTING ROD BEARINGS (SET)

Sizes Available:  STD,  .010,  .020

Shaft Diameter(Stock): 2.2826"-2.2837"

Bearing Width: 0.651"

NOTE:If you want the oversized parts, PLEASE send us a direct message over eBay stating the sizes of parts you are requesting.  You may also leave us a note in the Add Instructions to Seller box that PayPal provided when you go to check out with PayPal (remember to click save).   

 
 
MORE INFORMATION: 

These bearings are manufactured by KING BEARINGS. King is one of the top manufacturers for the US Space Program, and they use the same quality assurence on their engine bearings. King Bearings are not only of outstanding quality, but they are very unique in design. Here is where quality, design, and value all come together. These are simply the best bearings on the market. The benefits of using these bearings are:

Tri-Metal vs. Bi-Metal Bearings

Traditional rod and main bearing construction is based upon a three layer configuration composed of a steel backing, a copper-lead layer and a very thin overlay of babbitt material only .0005" - .0008" thick.

These bearing uses just two layers, a high strength steel backing plus a bonded layer of "Alecular" bearing material .012" - .015" thick.

Alecular material is an alloy of aluminum, tin, copper and several other elements. Because it is an alloy, it maintains its properties throughout its entire depth, delivering consistent and reliable performance.

Particle Embedability

More than half of engine bearing failures are caused by metallic particles which scratch crank journals and tear or weaken thin babbitt overlays such as in the tri-metal bearing.

Since Alecular bearing layer is much thicker than the babbitt overlay (.015" vs. .0008"), it provides eighteen (18) times more embedability than a tri-metal bearing to catch and hold particles so they don’t scratch the crank journals. This is especially true for particles over .0004" in diameter which cause most of the damage.

Conformability

The much thicker layer of Alecular bearing material (.015" vs. .0008") allows the bearing to conform to problems such as metal to metal contact when there is mis-alignment present or the connecting rods stretch. Greater conformability means fewer bearing failures.

Temperature Resistance

The Alecular material’s melting/fatigue point is over 11000 F, almost three times that of the thin babbitt overlay in a tri-metal bearing (400OF). This means added protection against localized overheating due to mis-alignment, detonation, overloading, loss of coolant, etc.

You simply CAN'T buy a better quality Bearing Set for any production application, AT ANY PRICE...

 
If you have ANY questions, feel free to give us a call:
Redline Engine Supply
Office: (503)719.7715
Monday-Friday: 9:00am-5:00pm PST
 

 

Click on Small icon to see more pictures
 
 

 
 

 

 


Our goal is to earn 5-STAR RATING and POSITIVE FEEDBACK with EVERY Purchase!
Here at REDLINE, we are committed to your satisfaction.  With every valued customer we will automatically leave you positive feedback within 48 hours after we have recieved cleared payment from you.  We want you to be 100% happy with your order. When you receive your order please take some time and leave us postive feedback with Ebay.  If you are not satisfied, or do not believe you can leave us positive feedback, PLEASE let us know before leaving feedback.  Send us a message on Ebay or give us a call at (503)314-5830 and we will do WHATEVER it takes to earn your satisfaction. 
Please know that a 5-Star Rating and Postive Feedback is very, very appreciated, and VITAL to us continuing to provide quality auto parts at a low cost to the customer.  Thanks!
 GUARANTEES
Any warranties on the products(s) sold hereby are those made by the manufacturer. The seller, REDLINE Engine Supply, hereby expressly disclaims all warranties, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose, and REDLINE Engine Supply neither assumes nor authorizes any other person to assume for it any liability in connection with the sale of said products. Any limitation contained herein does not apply where prohibited by law. New items can be returned in unopened, unused condition for refund (subject to 20% restocking fee) or replacement within 7 days. We cannot refund S&H on standard returns.  If there was a mistake in the order made by REDLINE, we will happily replace or refund the products with NO restocking fee, no questions asked. Here at REDLINE, we STAND by our products and service. 

WE ACCEPT: 
  • PAYPAL
  • Visa
  • MasterCard
  • Discover Card
  • American Express
  • To pay with a CREDIT CARD call our office at (503)719.7715
  •  Payment must be received within 3 business days of the purchase. 
 Once payment for an order is received the product will generally be shipped the SAME DAY.  Except on weekends and federal holidays, then the items will be shipped the next available shipping day.  Actual shipping time usually takes between 2-7 shipping days, depending on location.  If you do not recieve your items in 7 shipping days please contact us and we will locate your order. We use UPS/FEDEX for all of our Continental USA shipments.  We will need your shipping address and billing address before any shipment is made. Shipments MUST be inspected at the time of the delivery for damage. If a freight claim is not filed then we can not do anything. Contact us to do a freight claim immediatePhotobucketly if damage is noticed. 
 
*Shipping Charge covers the 48 Continental United States ONLY.
 
*Shipping to Hawaii/Alaska is available, but an additional shipping surcharge will be applied.
 
*To ship to Canada you must use a valid credit card, and the buyer must agree to pay for 100% of the aquired shipping costs. 

REDLINE Engine Supply is more than just your normal eBay store.  We are a one-stop service for all your engine rebuild parts and needs. We will work with you to make sure you are getting the exact parts you need. We pride ourselves on being able to supply high-quality engine parts at great low, low prices! 
With REDLINE on your side there is no reason to ever have to overspend at the Napa, CarQuests, and O'Reillys of the world.  With REDLINE there is no reason to ever have to deal with the outragious markups of your local machine shops. With REDLINE you get the parts you need, at the price you deserve, delivered to your door!!
If you have any questions before ordering please give us a call/email with your VIN# to make sure this is the correct component for your vehicle application.

 

Redline Engine Supply

Portland, Oregon

Office: (503)719.7715
 


 


Powered by eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.

Mercedes M-class facelift (2008): first official pictures

Thu, 13 Mar 2008

By Ben Pulman First Official Pictures 13 March 2008 11:43 Believe it or not, but this is the facelifted Mercedes M-class. And despite the blink-and-you’ll-miss-it styling, Merc claims to have meticulously revamped its SUV. The nose gets a new front bumper, new headlights, and in case the M-class wasn’t in-your-face enough, there’s also now a ‘more dominant radiator’.

New baby Jaguar saloon to be shown this summer

Fri, 07 Feb 2014

The new small Jaguar saloon out testing in ill-fitting XF camouflage Jaguar has made huge strides in the last few years and is now on the brink of being recognised, once again, as a major force. But so far Jaguar has been producing great cars in not the biggest-selling sectors, but that’s set to change with the new small Jaguar saloon (perhaps the Jaguar XS) which will be first shown this summer ahead of a 2015 launch. The new baby Jaguar will be entering a very competitive market place, taking on cars like the BMW 3-Series, Mercedes C-Class and Audi A4, so Jaguar are going to have to work hard to produce not only a credible car, but one that uses its ‘Britishness’ as its USP.

Honda S2000 sports car gone after ’09 model year

Mon, 26 Jan 2009

Honda confirmed on Monday that the S2000 sports car is done after the 2009 model year. The two-seater was launched in 1999 as a 2000 model and is a favorite of enthusiasts who enjoy its slick manual transmission and tight chassis. The club racer-inspired trim, the S2000 CR, was added for the 2008 model year.