Find or Sell any Parts for Your Vehicle in USA

91-97 Toyota Previa Supercharged 2.4l Dohc 2tzfe 2tzfze *engine Re-ring Kit* on 2040-parts.com

US $120.95
Location:

Orange, California, United States

Orange, California, United States
Condition:New Brand:Aftermarket Products Placement on Vehicle:Front Manufacturer Part Number:FS/PR/MB/RB/TW-92490 Surface Finish:GRAPHITE Head Gasket material Interchange Part Number:Fel-Pro Cross-Ref.: HS9831PT, CS9831 Warranty:Yes Other Part Number:OEM #: 13011-76050, 13011 76050, 1301176050 Country/Region of Manufacture:Taiwan UPC:Does Not Apply

   

What it fits:

  • 1991-1994 Toyota Previa 2.4L / 2TZFE Motor / 16V /  DOHC

  • 1994-1997 Toyota Previa Supercharged 2.4L / 2TZFZE  Motor / 16V / DOHC

Description:

This is a BRAND NEW Aftermarket Full Gasket Set, Piston Rings Set, Main Bearings Set, Rod Bearings Set, and Thrust Washers for OE engine repair.

All of our products will either meet or exceed OE specs.
*Please examine our image carefully to see what is exactly included (our listed description below may not be accurate)

Parts included:

1-
Complete Full Gasket Set:

  • Head Gasket (graphite material)
  • Valve Cover Gaskets
  • Intake Manifold Gasket
  • Exhaust Manifold Gasket
  • Valve Stem Seals
  • Half Moon Plugs
  • Other small Gaskets & Seals
  • Conversion Gasket Set (Lower Gasket Set, includes: Oil Pan Gasket, Rear Main Seal, and more)

1- Complete set of  NPR Brand Piston Rings Set (made in Japan): 
(includes 1st Rings, 2nd Rings & Oil Rings)

  • Standard Diameter:    95.00mm
  • 1st Ring Group:            1.75mm
  • 2nd Ring Group:           1.50mm
  • Oil Ring:                       4.00mm

Available Sizes for Piston Rings Set:

• 95.00mm (Standard)
• 95.50mm (+20 Oversize, +0.50mm Oversize)

*Please specify your requested size at "NOTES TO SELLER" or "MESSAGE TO SELLER" section of the payment screen.   If you do not specify any size in your order, your order will automatically  be processed with STANDARD SIZE. 

1- Complete Set of Engine Bearings Set

  • Main Bearings Set
  • Rod Bearings Set
  • Thrust Washers

Available Sizes for each Engine Bearing Set:

  • +00 (Standard)
  • +10 (0.25mm Over)
  • +20 (0.50mm Over)

*Please specify your requested size at "NOTES TO SELLER" or "MESSAGE TO SELLER" section of the payment screen.  If you do not specify any sizes, your order will automatically be processed with ALL STANDARD SIZE.

Search Tags: Toyota  Previa 1991 1992 1993 1994 (91 92 93 94), Toyota Previa Supercharged 1994 1995  1996 1997 (94 95 96 97)
Engine Type: 2TZFE  (2.4L) - 2438cc 4cyl 16V DOHC, 2TZFZE (2.4L) - 2438cc 4cyl 16V DOHC
Fel-Pro Cross-Reference: HS9831PT  & CS9465

Shipping and  Handling:

We try our very  best to process and ship out all orders promptly (within 1-2 business) of  payment receipt.  However, there may be times where unfortunate  circumstances may cause delay in the processing of orders by 1 day or so.   When this happens, we try to keep buyers informed and up to date with the  situation by email.

  • For domestic  shipping (within the U.S.), I will either utilize USPS or UPS as the  shipping courier.  The average shipping time is 2-3 business days  (this is the time-frame once the package has been processed and packed  for shipping).  We will send an email with the tracking number  included once the package is processed and ready for courier pickup.

  • For  international shipping, I use USPS Priority International only.   The shipping time usually averages 6-10 business days (this timeframe is  after the processing and packaging of the order for pickup).  Once  it has been processed, an email with tracking number will be sent to  you.

 *As  with everything, there may be delays in the  shipping time.  Such as bad  weather, holiday season rush, national holidays closures, postal strikes,  etc...

Warranty and Return  Policy:

14 Days Money Back Guaranteed!

Return:  All returns must be submitted within 14 days of receiving, along with  the original receipt or invoice. The shipping cost is not refundable.  You need to have return authorization by contacting us.

Warranty:  Performance part warrants its entire product to be free from defects in  workmanship and material under normal service conditions for a period of 60 days from the original date of purchase. This warranty is not  transferable, is valid to the original purchaser, and limited to the  replacement of a defective product only.

This limited warranty does not cover non-certified mechanic installs, labor  cost, damaged from accidents,  alterations, issues or modifications not intended by the manufacturer. All  warranty claims must be pre-authorized and returned prepaid to  CaliAutoParts.com for inspection and approval. This warranty does not cover  or assumes responsibility for any expenses, such as labor, towing, loading  fluids, oils or car rentals. This limited warranty gives you specific legal  rights, and you may have rights that vary from state to state. The above  limitations may not be applicable in your state.

**We strongly suggest/urge all parts to be installed by a certified  mechanic.  Parts broken due to home installations are NOT covered.   We will ask for proof of installation by a certified mechanic before all  approved warranty replacements.

Contact: *eBay message me* for any questions or request for a return  authorization!
I do my best to check my emails frequently, but keep in mind that our operating hours are from:  Mon - Fri (9:00 am-5:00 pm).

Payment  Policy:

 

We accept paypal,  bank issued certified checks, cashier checks and credit cards.  If you have any questions about payment, feel free to email us at *eBay message me*.

** Paypal payment is the fastest payment method for ebay transaction and we  highly recommend our customers to pay by PayPal.  All information will be secured.

Important notes
 

  • We will hold all check payments for 10-12 days before we ship out the  item in order to make sure the amount is cleared and no charge back

  • When you make payment with a bank certified check or cashier's check, please  make sure you include the following information, otherwise your shipment might  be delayed:

    Full name:
    Shipping address:
    Item Num:
    Email address or Phone num:

    Please make sure Name and address is clear and read-able, we suggest our customers to print out a auction page so we can refer to the correct auction number.

  • Please make sure to include the correct amount when you make payment.  Insufficient payment will be put on hold until full amount is paid.  Our payment  is very straightforward, no hidden fee, so when you make your payment, the total  will always be:

    Auction end price + Shipping and handling price (you can apply our shipping calculator above to get the exact amount or check our listing for the correct amount)

    About Us:

     


    We strive to provide quality-made aftermarket replacement parts  for engine rebuilds.  The products we sell are supplied by a very  well-established company with 10+ years in business.  We stand by their  products and have good faith that the parts are reliable.

    If for any reason you do not find the parts you receive to meet your  expectation, we will gladly talk to you and try our best to resolve any  issues you may have.  As part of our objective, we want to provide the best  experience when it comes to purchasing parts with us.  From answering  questions to proceeding to checkout for payment of items, we aim to help  make the entire process as seamless as possible. 

    You may contact us via:
    Email: *eBay message me*
    Phone: (626)475-2760

     

  • Who's Where: Kevin Rice becomes Mazda Europe’s design director as Peter Birtwhistle retires

    Mon, 18 Aug 2014

    Mazda Europe has a new design director. Effective 1 September, Kevin Rice will succeed Peter Birtwhistle, who retires from the post of chief designer, bringing to an end a 26-year career with Mazda. Following graduation from Coventry University's transport design course, Rice, 50, began his professional career at Opel in 1986.

    Mercedes-Benz B-Class aerodynamics tested [w/video]

    Tue, 21 Feb 2012

    Mercedes-Benz has produced a video testing the aerodynamics of its new B-Class – which it claims is the most aerodynamically efficient car in the world – using a wind tunnel and fluorescent paint. The W245-generation B-Class has the lowest aerodynamic drag in its segment with a Cd of just 0.26, thanks to features such as serrated front wheel arch spoilers, optimized cooling airflow and a Pagoda roof to help airflow over its profile. The car's aero properties were put to the test at the MIRA vehicle test facility in the UK using fluorescent paint in 60mph winds to highlight its flow dynamics, only visible under UV lights.

    Dodge Dart unveiled at 2012 Detroit show

    Mon, 09 Jan 2012

    If you want confirmation that Fiat CEO Sergio Marchionne is shaking up his American patient look no further than the new Dodge Dart. It's a new compact car for Dodge - based on the underpinnings of an Alfa Romeo Giulietta. It's an important launch for Dodge and this sector accounts for 15% of all US car sales.