Find or Sell any Parts for Your Vehicle in USA

92-95 Bmw 325i 2.5l 96-00 328i 2.8l M50 M52 Bosch 4 Hole Fuel Injectors on 2040-parts.com

US $65.00
Location:

Casselberry, Florida, US

Casselberry, Florida, US
Returns Accepted:Returns Accepted Item must be returned within:14 Days Refund will be given as:Money Back Return shipping will be paid by:Buyer Restocking Fee:No Return policy details: Brand:Bosch Placement on Vehicle:Front Warranty:Yes Country of Manufacture:United States


   
TOPDOG INJECTORS, ADD SOME AGGRESSION  TO YOUR FUEL SYSTEM!!

 We Are New to eBay, but not  new to this Type of Business!! SATISFACTION GUARANTEED!

FULL SET OF INJECTORS, PROFESSIONALLY RE-MANUFACTURED WITH LIFETIME WARRANTY!

(READ BELOW FOR DETAILS ON OUR RECONDITIONING PROCESS )



These 19lb injectors are an upgrade from the 14lb 0280150414 that you may have as the stock Injectors. This design made also by Bosch includes the 4 hole discharge which produces better fuel Atomization by producing several finer streams of fuel instead of one large stream. This disperses over a larger area into the air intake stream and mixes better yielding more efficient combustion, resulting in better economy, better throttle response, and better performance.These are direct fit, no modifications required.




UPGRADE YOUR FUEL DELIVERY SYSTEM FOR ;

  • BETTER FUEL ECONOMY

  • FASTER THROTTLE RESPONSE

  • BETTER PERFORMANCE

  • INCREASED ENGINE LONGEVITY






EACH SET IS FLOW MATCHED WITHIN 1%


This ensures equal fuel distribution to all cylinders. Because most vehicles have one oxygen sensor for 4 cylinders ( as most V8's ) this means the computer cannot detect individual cylinders that are slightly leaner or richer than the others. So under heavy load or high speed, if one leaking injector causes the entire side of the engine to appear too rich, the computer can try to lean out that whole side to correct the problem, resulting in 3 cylinders running too lean and one still rich due to a leaking injector. This can be very dangerous to the longevity of the motor. So by ensuring equal flow to all cylinders this helps increase engine longevity especially in racing or off road applications.



OUR RECONDITIONING PROCESS ;

  • Each injector is externally cleaned and inspected for any damage to the body, connectors, etc. that would render the unit inoperable.

  • Each injector undergoes a state of the art ultra-sonic cleaning process which breaks down any deposits that have formed inside the injector that would cause it to stick open or close, or inhibit the mechanical function of the unit.

  • The injectors then get reverse flushed to remove any broken down deposits from inside the unit while the internal filters are removed.

  • Then each injector is placed on our flow bench where it is checked for proper flow at static ( wide open ) and also checked at various different operating speeds to ensure it is functioning properly.

  • Each unit is tested for leaks under high pressure.

  • The injectors are then grouped in matching sets within 1% variance based on the static flow measurement taken during the testing.

  • New filters, o-rings, spacers and pintle caps are installed in each unit.

  • Any old paint or surface rust is removed from all metal bodied injectors, then each injector is clear coated or repainted to protect the metal from future rust.

  • All injectors are assembled with all new parts based on the application it is designated for.



LIFETIME WARRANTY


100% SATISFACTION GUARANTEED

TOPDOG, would love to have the best possible business relationship with you! If you are not 100% satisfied with your purchase please contact us we are almost always available via eBay message, we will make every possible effort to resolve any questions or concerns you have with your product. Any problems will be resolved through a prompt replacement of any defective parts. If we are not able to satisfy you with the purchase you will receive a 100% refund! 


Vehicle Placement


1995-1996 BMW M3 3.2L S52

1992-1995 BMW 325i 2.5L M50

1992-1995 BMW 325is 2.5L M50

1996-1999 BMW 328is 2.8L M52

1996-2000 BMW 328i 2.8L M52

1996-2000 BMW 328ic 2.8L M52

1991-1995 BMW 525i 2.5L M50

1997-1998 BMW 528i 2.8L M52

1985-1993 BMW 535i 3.5L M30

1985-1989 BMW 635csi 3.5L M30

1985-1992 BMW 735i 3.5L M30

1986-1987 BMW L7 3.5L M30

1986 BMW L6 3.5L M30

 
SHIPPING DONE THROUGH USPS
  • Priority Mail (1-3) Business Days - Free
  • Priority Mail EXPRESS (1-2) Business Days - $18.00
  • Canada Priority Mail (4-6) Business Days - $20.00
  • Canada Priority Mail EXPRESS (3-5) Business Days - $35.00
  • World Wide Priority Mail (5-10) Business Days - $24.00
  • World Wide Priority Mail EXPRESS (3-5) Business days - $45.00



Fuel Injectors for Sale

A 75th birthday for the '34 Ford

Fri, 08 May 2009

Two years ago, the hot-rodding world pulled out all the stops to celebrate the diamond jubilee of the iconic 1932 Ford, the hot-rodder's hot rod. The high point of that jubilee was a gathering of the 75 most significant '32s in conjunction with the Grand National Roadster Show of 2007. It was held in its own hall at the L.A.

Call to cut school run car journeys

Tue, 17 Jun 2014

A 10% CUT in school run car journeys would boost Britain's economy by around £46 million a year, a sustainable transport charity has claimed. Sustrans, which is calling on the Government to formally recognise the right of every child to be able to walk or cycle to school safely, estimates that ferrying children to school by car accounts for 24% of peak time traffic. Using Department for Transport modelling to calculate the financial drain on business caused by rush-hour congestion, Sustrans estimated that a 14% reduction in car use for school runs would take 167,000 vehicles off the road with an annual "saving" of £66.2 million.

Nissan Micra (2010) first design sketches

Thu, 01 Oct 2009

By Ben Pulman First Official Pictures 01 October 2009 15:38 This is our first glimpse of the new Nissan Micra, revealed today in two design sketches released by the Japanese car company. Designed to be sold around the world, the new Micra will retain the current car's front-engined, front-wheel drive layout, while three- and five-door bodystyles are expected to be offered. No.