Returns Accepted:Returns Accepted Refund will be given as:Money Back Item must be returned within:30 Days Return policy details:GENERAL RETURN POLICY: Returns only accepted within 30 days of purchase. No exceptions. Part is guaranteed fully functional or your money back. This does not include improper installation or incorrect interchange. Refund will be granted upon receipt of the defective part. NON DEFECTIVE RETURN POLICY: NON DEFECTIVE RETURNS MUST BE MADE WITHIN 30 DAYS OF PURCHASE, AND ARE SUBJECT TO 25% RESTOCKING FEE. RETURNS MADE ON NON-DEFECTIVE PARTS ARE NOT ELIGIBLE FOR A REFUND ON FREIGHT. ENGINE RETURN POLICY: Engines are guaranteed for thirty (30) days after date of receipt, and only when used under normal driving conditions. Used engines are warranted as long blocked (against cracked blocks, heads, flat cranks, and all internally lubricated components). Any abuse or lack of maintainence or overheating will void the warranty. A heat tab will be placed on all engines. Removal of the heat indicator tab voids the warranty. TRANSMISSION RETURN POLICY: Transmissions are warrented to work properly and guaranteed for 30 days. All warranties are contingent on the parts being properly installed to the manufacturer's recommendations. Any improper installation will void the warranty. Warranty is voided if the cooling lines and radiator are not flushed prior to installation. Not installing new filter will void any warranty. We do not warranty external sensors, solenoids, linkages, or leaking seals. AIR CONDITIONING COMPRESSOR RETURN POLICY: OUR STANDARD PARTS WARRANTY IS THIRTY DAYS. FOR THIS WARRANTY TO BE VALID ON AIR CONDITIONING COMPRESSORS, THE RECEIVER-DRYER MUST BE REPLACED AT THE TIME THE COMPRESSOR IS INSTALLED. THE RECEIVER-DRYER IS ALSO A FILTER, AND PREVENTS ANY DEBRIS OR CONTAMINATION THAT MAY BE PRESENT IN THE SYSTEM FROM DAMAGING THE NEW COMPRESSOR. PROOF OF PURCHASE AND/OR INSTALLATION OF A NEW RECEIVER-DRYER IS REQUIRED FOR ANY AIR CONDITIONING COMPRESSOR WARRANTY CLAIMS. Return shipping will be paid by:Buyer Restocking Fee:No Manufacturer Part Number:F57B 16C856 AB Interchange Part Number:117-1511A Other Part Number:sn 4853 Placement on Vehicle:Left Part Brand:Ford

This auction is for the following item:

This is a used hood release handle with cable

from a 99 Ford Ranger

Part Number F57B 16C856 AB

Based on similar hoods,

It will fit:

01-09 Mazda B2300

98-01 Mazda B2500

98-08 Mazda B3000

98-09 Mazda B4000

98-11 Ranger

Probably fits a LOT more years,

and may fit Explorers as well (same dash)

It is the buyer's responsibility to determine
if this part will fit his/her vehicle

NON DEFECTIVE RETURN POLICY:

NON DEFECTIVE RETURNS MUST BE MADE WITHIN 30 DAYS OF PURCHASE, AND ARE
SUBJECT TO 25% RESTOCKING FEE. RETURNS MADE ON NON-DEFECTIVE PARTS ARE
NOT ELIGIBLE FOR A REFUND ON FREIGHT OR SHIPPING.

Please compare part number before buying

(part number is on the metal bracket)

It is in good used condition

Questions? Not what you're looking for?

Please contact us if you need something else.
_____________________________________________________

INTERNATIONAL CUSTOMERS: International shipping via

USPS is NOT available at this time.

_____________________________________________________

All sales with in Arizona will be charged sales tax.

We accept Visa / MasterCard.

We ship using UPS for continental non-freight shipping.

We are a company that takes your business seriously.
We will answer your emails and calls as
soon as possible during our regular business hours.
We will leave good feedback for you upon
completion of successful Ebay transactions only.

We recycle wrecked Pickup Trucks, 4x4's, and SUV's.
From Engines and transmissions to wiring harnesses and door parts.
Steering and suspension parts to lighting assemblies and dash components.
Emission controls and body parts to bumpers and seats.
We stock parts that other yards throw away.

Our address is:

Ace Pickup Parts
9110 S. Eisenhower rd.
Tucson Az, 85706

Call us toll-free at:
(888).862.4ACE (4223)
or
(520).889.9000
Or fax us at:
(520).889.5000

And Remember Our
Hours of Operation:
8:00 AM till 5:00 PM
Monday through Friday
Closed Weekends

First Sight: Mercedes-AMG GT

Wed, 10 Sep 2014

“If I was to buy any sports car that wasn't a Mercedes, it'd be a Porsche 911,” says Mercedes' head of design, Gorden Wagener. “But when you see the two cars together, we think ours has the edge.” He's talking about the new Mercedes-AMG GT, a front-mid engined, two-seater sports car that's unashamedly aimed at higher-end 911s, and we've come to see it at Mercedes' Sindelfingen studio. The GT replaces the larger SLS, and is seen by Wagener as the best example yet of his 'sensual purity' design philosophy: “The SLS is very much [he gestures] line, line with a surface in between. With the GT we started with the surface and worked to refine and reduce the number of lines.” Elements of the SLS's platform have been carried over, so the GT measures the same 1,939mm wide.

Mercedes coupes: the next generation

Tue, 14 Oct 2008

By Georg Kacher Motor Industry 14 October 2008 13:28 Mercedes is to shake up its entire family of coupes, CAR hears. The changes kick off with the new E-class coupe and will include a proper new C-class coupe (instead of today’s short-cut CLC), as well as repositioning the top-dog CL. The CLK badge will die next year, replaced by the E-class coupe.

Ford Interceptor (2007): first official pictures

Tue, 02 Jan 2007

By Tim Pollard First Official Pictures 02 January 2007 12:51 Ford Interceptor Concept: the lowdown What do you get if you take the iconic Ford Mustang and mix in a four-door saloon with a large dollop of attitude? Ford has tried just that and come up with the Interceptor concept, due to bow in at the Detroit Motor Show next week. Conceived along the lines of the Chrysler 300C, this is a four-door you'd be happy to drive, unlike many of Ford's recent saloons.

98-11 Ford Ranger Mazda B3000 Oem Hood Release Handle & Cable F57b 16c856 Ab on 2040-parts.com