Find or Sell any Parts for Your Vehicle in USA

Alien Armor Boat Wrap - Customized For Your Boat - Grundge Diamond Plate on 2040-parts.com

US $595.00
Location:

Naples, Florida, United States

Naples, Florida, United States
Condition:New Decal Type:Wrap Country/Region of Manufacture:United States

BRAND NEW BOAT WRAP DESIGN

BE THE FIRST TO HAVE THIS ON YOUR BOAT
Alien Armor Boat Wrap - Customized for your boat - Grundge Diamond Plate

Sold in directional pairs, one left and one right side.
This wrap purchase is for a boat wrap to fit on a boat that is between 18 feet to 20 feet in length
From the rubrail down to the waterline.**

Longer boats may cost a little more.
Smaller boat sizes are fine as well.

We will customize the wrap AFTER purchase to fit the actual year, make and model of your specific boat to show the most available image area to achieve the best visual display.

Our boat wraps can be fitted to accommodate most boat models.

Once ordered and paid for, you will NEED to provide the
year, make, model, length of your boat and a side shot picture
as well as very accurate dimensions.

SEE EXAMPLE OF HOW TO MEASURE BELOW
Please email us with details.
Once you have approved the layout, we will manufacture it and ship within 36-48 hours. All products made on site.

Wrap will have excess in the front and rear as well as the top and bottom to allow for appropriate amount of trim.
Set up to be trimmed at the nose and a few inches around the back toward the motor.

Your graphics color may vary slightly from what you see depending 
on you monitor Setting.

(boat not included, ha!)
Material is 3M IJ180 cv3 cast boat wrap vinyl film with 3M 8518 cast overlaminate for maximum UV protection.
Shipping to the lower 48 U.S. only. No shipping to Hawaii and Alaska.

Boat Wrap by Wraponboats.com

Please try to follow these instructions to ensure success.

1. Specify the color or design you prefer, such as “Green” or "Diver & Octopus".

2. Submit an image of the boat. Make it a nice side shot like this example.
Submit images and artwork to:
email artwork here

Skiff Example

3. Take some dimensions of the boat hull. Be sure to include the length along the rubrail,
the max depth from the rubrail down to the waterline edge where the wrap will end,
then along the hull every 2 feet or so as shown in the diagram.
Take Boat dimensions like this
4. Your wrap print will ALWAYS have more length and width than the actual dimensions
you send for “wiggle room” and proper trimming.

5. Be sure to include the year, make and model of your boat.

6. We submit a final mockup layout for your written approval showing the wrap you
chose superimposed on the image of your boat hull.

Payment types: Visa, MasterCard, AmEx

Pay by Phone (239) 431-7356 Monday-Friday 8am to 5pm (e.s.t)
We can also process payments using paypal

Mockup for proofing
7. Once we receive your approval the finished boat wrap is produced
and shipped within 36 to 48 hours.
YOUR WRAP WILL COME IN A RECTANGLE SHAPE AS SHOWN IN THE ABOVE
EXAMPLE. THIS ALLOWS FOR PLENTY OF TRIM AREA.

** 3b. If you want your boat wrap to go up over the rubrail into the gunwales, or if you want the bow or stern wrapped as well, you need to provide those dimensions as well. This will add to the cost. You can use the below diagram as a reference to ensure your wrap fits and presents itself the best.

Measure your boat similarly to tjhis

Dimensions needed for rear of boat erap

We have many variations of our graphics and also provide custom colors upon request.
 If you have any questions, Please don't hesitate to call.



Rolls-Royce teases Wraith before Geneva motor show

Tue, 22 Jan 2013

Rolls-Royce has revealed the first actual photo of the upcoming Wraith coupe, which will debut at the Geneva motor show in March. The first teaser image was just smoke in the shape of the Spirit of Ecstasy hood ornament, but this photo shows the actual shape of the car. Last week we reported that the big coupe will most likely carry a 6.0-liter V12 engine that should create about 600 hp, and that the car will be about 7 inches shorter than the four-door Ghost.

Bad British drivers 'in denial'

Mon, 18 Nov 2013

A NEW study has uncovered the extent to which British drivers will stubbornly refuse to admit being wrong or behaving badly on the road. Almost all (98.7%) UK motorists believe they are safe drivers, but only 22.6% of those who had an accident admitted being at fault, which seems to display a degree of denial in British drivers when it comes to behaving badly on the roads. Carrot Insurance, which specialises in providing telematics-based policies to 17-24-year-olds, carried out the survey ahead of this week’s National Road Safety Week campaign and discovered several surprises.

2014 Range Rover by OVERFINCH revealed

Fri, 20 Dec 2013

The 2014 Overfinch Range Rover (pictured) revealed The world is full of customisers who will take your Range Rover and make it more individual, but there is one such company that has the credibility of a history of making Range Rovers more appealing and, on the whole, doing it in a more subtle way than many of the newcomers – Overfinch. The 2014 Overfinch Range Rover has been revealed as ‘the world’s most luxurious SUV’ (according to Overfinch) with a huge range of options to make Overfinch’s Range Rover as individual as your tastes – and bank account – will allow. Overfinch has added their traditional three cooling apertures in the front bumper – complete with lacquered carbon fibre treatment – and the new back bumper, side skirts and roof spoiler are all made from carbon fibre too, perfectly in tune with the new Range Rover’s lighter ethos, and there’s a set of cast tailpipes by Overfinch at the back.