Aluminum Driveshaft Big 4" Tube X 62-3/8" Long Racing Prop Draft Shaft Chevy Van on 2040-parts.com
Jacksonville, Florida, US
Was acquired by a relative for a racecar project and never got used..
Specifically from a 96 1996 Chevrolet / GMC 1-ton G3500 G-30 van with 350 / 5.7L V8 and Automatic Transmission 119k , will probably fit other Models / Applications but as we are not a business / dealer /etc , please do your own research for additional info / specs / interchange , etc...
Shaft is: 4" Diameter
U-Joint Requirement either end = 3-5/8" Wide / Square / Across with a 1-3/16 Diameter Cap
62-3/8" u-joint eyes center-to-center
57-3/4" weld center-to-center
64" overall length as shown
Center Black Plastic Protective Sleeve is 50" Long
Tag on shaft reads:
15679625
19 APR 96
917662-5729
Very Lightweight.. only weights around 11.5 lbs as shown
Being sold "as-is" as core/project parts, etc...
*- all Weights & Measurements are "Approximate"
****Terms of Sale - PLEASE READ CAREFULLY****
Unless alternate terms and/or arrangements have been agreed to by us in advance and in writing, the following shall take precedent and be required.
***If you have less than 10, or, ANY Negative Feedback or Non-Paying-Bidder complaints/strikes in the last 60 days, please contact us before purchasing, otherwise this transaction may be canceled..***
Will sell only to domestic/USA Buyer, and only ship to the contiguous/lower 48 USA states. If you do not fit these descriptions, including Alaska, Hawaii, Puerto Rico & Canada, DO NOT PURCHASE/BID ON THIS ITEM, your bid and/or this transaction will be canceled.
All payments must be made in United States currencies.
Will only ship to a VERIFIED/CONFIRMED PayPal address. If you don't have a PayPal VERIFIED/CONFIRMED address, item will be held until address is VERIFIED/CONFIRMED. Per eBay/PayPal requirements, Items valued at over $250.00 USD will require signature confirmation from the Buyer for delivery.
Upon transfer of full payment to our local bank account, item will be sent via ground/parcel shipping, so only physical STREET addresses accepted, no PO Boxes, etc. We will email you a tracking number when shipped.
***To Help Expedite the Arrival of Your Package, please include in the NOTE section of your PayPal Payment a DAYTIME phone number so the shipper could contact you if need be***
Item(s) have been described to the best of our ability with any known, perceived, and/or readily apparent defects/issues disclosed, however, possibly but not limited to, Item(s) may still require cleaning, polishing, buffing, sanding, prepping, customization, inspection, repair, and/or modification, etc for your particular intended personal and/or any other use, and therefore Item(s) are sold "As-Is", no returns, no refunds, and with no warranties of any kind, implied or otherwise, as to Item(s) usability, fitness, longevity, and/or merchantability. Do not assume anything and ask all questions before Bidding on and/or Purchasing this Item(s). By Bidding on and/or Purchasing this item, you are stipulating that you are completely satisfied with the Item(s) description, Pictures, Question & Answers in the ad's "Questions from other members" section, and/or Seller's direct response to your question(s), and accept all of the Terms listed in this auction.
YOUR BID ON THIS ITEM IS A LEGAL AND BINDING CONTRACT. PLEASE DO NOT BID IF YOU ARE NOT SERIOUS ABOUT COMPLETING THIS TRANSACTION. IF YOU KNOW YOU ARE UNABLE TO COMPLY WITH ANY OF THE TERMS OF THIS AUCTION PLEASE DO NOT BID. IF THE WINNING BIDDER DOES NOT COMPLY WITH THE TERMS OF THE AUCTION, WE WILL CANCEL OUR TRANSACTION, AND APPROPRIATELY REPORT THE BIDDER TO EBAY.
Universal Joints & Driveshafts for Sale
- Driveshaft + carrier bearing 4-door crew cab 2wd chevy gmc truck 1980 73 87 1992(US $99.00)
- Dea products a6027 center support bearing drive shaft for 1975-2002 gmc/dodge(US $2.11)
- Dea products a6008 center support bearing drive shaft for 1984-90 toyota 4runner(US $0.99)
- Dea/ttpa a6003 center support bearing(US $25.43)
- Dea/ttpa a6040 center support bearing(US $39.66)
- Precision joints 387 universal joint(US $22.95)
Aston Martin Rapide interior shots surface
Sun, 09 Aug 2009This appears to be the first official image of the interior of the Aston Martin Rapide So it’s no real surprise, with the Aston Martin Rapide actually getting to the point of being production ready, that shots (or renderings, probably) have surfaced. We had ‘official’ shots of the Aston Martin Rapide in April, and now we have an interior shot. Not the biggest – or most enlightening – shot, but they do seem to be real, rather than the work of an enthusiastic amateur Photoshopper.
New Images: Mercedes Unimog concept
Wed, 15 Jun 2011Mercedes-Benz's Special Trucks unit (MBS) recently revealed a design study celebrating the 60th anniversary of the Unimog at the Daimler plant in Wörth, Germany. Called simply '60 Years Unimog', the concept is said to inform the future form language of Mercedes-Benz commercial vehicle design. Developed jointly by the MBS development team, the Daimler commercial vehicle designers in Sindelfingen and a model designing partner, the Unimog concept was inspired by the poison dart frog, a natie of Central and South America.
April car sales in a nutshell: The year's 2nd-strongest month
Tue, 04 May 2010Here are highlights from April's U.S. auto sales report: Industry rises 20 percent Overall U.S. sales rose 20 percent in April to 982,302 light vehicles, a gain of 162,610 over the same period a year ago.