Find or Sell any Parts for Your Vehicle in USA

Aussiespeed Slant 6 Polished Aluminum Valve Cover 170 198 225 Dodge Chrysler on 2040-parts.com

US $369.00
Location:

McKinney, Texas, United States

McKinney, Texas, United States
Condition:New Brand:Aussie Speed Surface Finish:Polished Manufacturer Part Number:AS0170P Country/Region of Manufacture:Australia UPC:N/A

AussieSpeed sand cast aluminum hand polished slant 6 Chrysler finned rocker cover, the slant six Aussiespeed alloy rocker cover suits both 170 & 225 engines has cast breather baffles with no plates, no screws or rivets inside the cover to come loose. The Aussiespeed slant six valve covers will fit both left and right hand drive cars as we have changed the angle of the cover to clear brake master cylinders. The Aussiespeed slant six alloy valve cover has an internal height measurement of around 90mm.

All of the Aussie Speed polished parts are individually hand polished, and they are a good quality polish, but not a full blown show polish, the most notable difference is between the fins, and the recesses for the bolts are not polished, and the flat areas are not mirror straight(they have not been block sanded at each step). They still look awesome, but are not a mass produced parts, or full blown show polished parts(a polish job like that would exceed the cost of the raw valve cover). I love how they look, and everybody I've shown them to has loved them too; I just mention this so you know exactly what you are getting.

Make sure and check out my other listings for the full Aussie Speed line, and contact me if you don't see an Aussie Speed part your interested in listed. If your interested in a few parts contact me, and Ill make you a package deal to save you a bit of money. Also check out my "SmallTownSpeed" shirts, because I can add one to any order with zero additional shipping costs.

NOTE: USPS PARCEL SELECT GROUND SHIPPING ON THIS IS FREE to you, BUT I RESERVE THE RIGHT TO SHIP VIA UPS, or FedEx when its more cost effective.

SmallTownSpeed is proud to be the North American Dealer for Aussie Speed performance products. I got started in their small engine line, and have found a good demand for their unmatched quality of products for their automotive line. Aussie speed does a BOAT load of R&D on these slant sixes, and they actually race them, to see just a little bit more about their R&D, go to the aussie speed shop site, and click the "Slant Six Info" tab on the left. Me bringing these parts in via freight gives me the ability to offer them in the USA for significantly less expensive than ordering straight from the manufacture; which previously has been the only option.




I'm a full time Firefighter/paramedic, and an avid motorcycle rider. I part out bikes to help offset what I spend building, riding, and racing them. With that said, I'm not a big shop, and this is not my only job. I will do everything in my power to ship parts out ASAP, and 95% of the time I get them out within 1 business day of when they are paid for, but because of my work schedule(where I work 24hr shifts, and sometimes work 48 and 72hr shifts), and my riding, there may be rare occasions that it may take longer than 24hrs before I get it shipped out. If you are in a rush to get the part, please contact me, and I will do everything I can get it out fast(and if you contact me, I can make special arrangements, and 99% of the time can get it sent out the same day). But if you are somebody who expects everything to be shipped instantly "come hell or high water", please find another seller who will better fit your needs, because I may very well be busy dealing with hell or high water, or just unwinding and riding my motorcycles. And the latter should be easy enough to relate to, right? I ALSO SELL PARTS ON FORUMS and LOCALLY, so I reserve the right to END AUCTIONS EARLY. I'm happy to combine shipping when practical, and I'm also happy to make package deals if there are several parts you need. Email is the best way to contact me, but I'm happy to give you a call, or give you my personal cell number if you would rather call me. FOLLOW ME ON FACEBOOK: SMALLTOWNSPEED

UNLESS OTHERWISE STATED, ALL OF THE PARTS I'M SELLING ARE USED. I guarantee them to fit the bike I took them off of; and any other years on models mentioned are to help people find parts that may work for them, not a guarantee of fitment. I pride myself in good customer service, accurate descriptions, and low prices. There is no feasible way for me to list or confirm every possible fitment while keeping my prices low. If you're not sure, check with your local dealer, or compare part numbers at an online oem supplier like motosport. BUT I CAN NOT STRESS ENOUGH THAT EVERY PART I SELL IS SOLD EXACTLY AS PICTURED AND AS-IS. It is also possible that over the life of the bike that I'm parting out, that parts were changed to something other than what was put on at the assembly line. So, where am I going with all of this? I wont stick anybody with parts they don't want or can't use. I accept returns, and my great feedback speaks for itself; seriously, read through some of it.... I treat other riders(that's you) how I would want to be treated; but I ask that you do the same for me in two ways. 1- having realistic expectations when your buying used parts. 2- if something is not right; let me know and give me a chance to make it right for you before opening a dispute or leaving feedback. I've never had anybody who has contacted me with an issue not end up completely satisfied. I aim for 5 star service 100% of the time. If I'm not achieving that, please let me know how I can improve.


Thanks!

Land Rover Freelander 2 Review & Road Test: Freelander 2 SD4 HSE (2011)

Sun, 20 Mar 2011

Freelander 2 SD4 Review & Road Test Whatever way you look at it, Land Rover’s current model line-up is a bit of a mess, at least as far as the lower end – Discovery 4 and Freelander 2 – are concerned. But it’s not the sort of mess to be avoided; rather it should be embraced by buyers before Land Rover get round to fixing it. There’s no argument about the Range Rover.

Britain’s safest drivers live in Greater London

Tue, 26 Nov 2013

Analysis from motorists using a car insurance driving safety app has revealed that the top area for safe driving is Greater London – including areas such as busy Islington, Chelsea and Croydon. The surprise revelation comes courtesy of the Aviva Drive app, which has recorded driving safety data from more than 3.5 million miles driven. 98% fear UK road safety not improving The safest new cars on sale That’s despite some of the heaviest traffic volumes in the UK being registered in Greater London.

Tesla Model S charging system may have started garage blaze

Thu, 19 Dec 2013

A fire department in Southern California said a garage fire may have been caused by an overheated charging system in a Tesla Model S sedan, in the latest link between the top selling electric car and the potential for fire. While Tesla Motors Inc. contends the fire was not related to the car or its charging system, the Orange County Fire Authority said the Tesla-supplied charging system or the connection at the electricity panel on the wall of the garage of a single-family home could have caused the fire.