Auto Car Night Led Ir Color Color Rearcamera 170 ° Reversing Camera on 2040-parts.com

Waterproof NTSC rear view camera
for easy recessed installation on the vehicle.

This rear view camera , integrated into a high-quality housing and a resolution of 656x492 pixels with 420 TV lines, parking is not a problem anymore. This high-resolution rear view camera with IP67, dustproof and waterproof. Thus, it is ideal for outdoor use as a reversing system. The video signal is transmitted via a video cinch cable and is so with most monitors or navigation systems compatible (an RCA input must be present or can be adapted).

The field of application are virtually no limits if you want to use it on the car, bus, camper, truck, trailer, etc., almost anything is possible.

The housing is weather-resistant, solid stainless and additionally equipped with a special lens glass, which protects against corrosion and "blindness".

It comes complete with connection cable, video RCA cable and mounting material (See delivery).

170 ° detection angle

The optics gives you a horizontal wide angle view of 170 degrees, so that the majority can be detected behind the vehicle.

Night vision function

Due to the high light sensitivity of 0 lux, also allows images in the dark. The 4 infrared LEDs do not light as a conventional LED, but radiate mostly for the eye invisible infrared light and thereby provide a highly recognizable black and white image. It easily detects obstacles in the dark at a distance up to 5 meters.

Distanzliniendarstelllung in Monitor

About the camera module distance lines are also displayed in the monitor. This allows the distance to obstacles behind the vehicle better estimate.

power supply

The power is supplied via the 12 V connector of your car reversing light, so the camera automatically turns on when reverse gear.

reviews:

Guide about the "detection angle" / "Viewpoint" with reversing cameras.

Reversing camera with 60 ° detection angle:

To make it as easy as possible to clarify what kind of impact the selected detection angle of the rear view camera, we recorded the representation of three different rear view cameras.

The but very small angle of 60 ° does not cover too much in width, but nevertheless illustrates the more "obstacles" in depth. Characterized the camera for monitoring the "blind spot" or for monitoring the immediate surroundings behind the vehicle is not suitable, since not the complete width of the vehicle is detected. The use of this camera could be used as digital rearview mirror for detecting the rear traffic, in agriculture for control of conveyer belts etc..

In contrast, a reversing camera with 170 ° detection angle:

The detection angle of 170 ° is enormous, it is extremely Captures much content in width. This is usually done through various wide-angle lenses. This has the disadvantage that the edges or the edge region are distorted. Content in the depth are shown very small, so you should use the camera only to monitor the immediate near range to be able to detect, for example in the license plate bar, or even in the trailer operation to the full swinging when maneuvering.

The middle ground, reversing camera with 120 ° detection angle:

From experience to her rear-view cameras have proved best with 120 ° detection angle. You easily capture the entire width of the vehicle, do not produce distortion and still provide a good representation of depth. For example, when mounted on the mobile home or even at the transporter, in the usual height of 2.30 meters, the camera already recorded more than 4 meters in width. aligned Down "barriers" are also in the deep well represented (see figure) Also suitable as a "spy camera" in the bumper of a car,. We carry this the reversing camera or STO STO-IR. For use at the mobile home or the Transportation, we have for example to the rear view camera IR18.