Balmar 140 Amp Alternator on 2040-parts.com

UP FOR SALE THIS MONTH IS 1 12 VOLT 140 AMP ISOLATED GROUND BALMAR

ALTERNATOR FOR YANMAR APPLICATION. THIS WAS PURCHASED AS A NEW

ALTERNATOR BUT FOR A DIFFERENT APPLICATION. HAVING A USED SET OF

HOUSINGS FOR THE YANMAR THEY WERE CLEANED UP PAINTED AND BAKED.

THE COMPONANTS WERE THEN SWITCHED INTO THE YANMAR CASES. ALL

COMPONANTS ARE  NEW, OEM BALMAR, EXCEPT THE CASES. IF YOU WANT A

PERFECTLY NEW YANMAR ALTERNATOR GO SPEND 800-900 DOLLARS.IF YOU

WANT AN ALTERNATOR THAT HAS SOME MINOR IMPERFECTIONS IN THE

COSMETICS OF THE CASES THIS MAY BE FOR YOU. AT 140 AMP MAX AND

A HOT RATING OF 110 AMP THIS IS A REAL POWERHOUSE.IT HAS A DUAL

 FOOT MOUNT 3.15" SPACING WITH 10MM BOLT HOLES FOR THE LONG BOLT.

THIS ALTERNATOR HAS BEEN RIGOROUSLY TESTED AT VARIOUS SPEEDS,

AND LOADS AND PERFORMED AS ANY NEW ALTERNATOR SHOULD.

IT IS STRICTLY FOR EXTERNAL REGULATION AND DOES NOT COME WITH A

 REGULATOR.A BALMAR OR XANTREX REGULATOR IS RECOMMENDED, BUT

 WOULD WORK WITH A STANDARD FORD REGULATOR,ALTHOUGH THE 

REGULATOR MAY NOT LAST AND IS ONLY SUGGESTED AS A SPARE BACK-UP.

THIS ALTERNATOR HAS A 6 GROOVE SERPENTINE PULLEY,BUT I HAVE A

 2 GROOVE 1/2" BALMAR PULLEY IF YOU PREFER IT. I ALSO HAVE MANY

 AFTERMARKET PULLEYS BUT YOU CAN RUN INTO PROBLEMS WITH THE

PITCH OF THE BELT SOMETIMES. I HAVE BEEN BUILDING AND REBUILDING

 MARINE AND RACE CAR STARTERS AND ALTERNATORS FOR OVER 30

YEARS AND KNOW BALMAR PRODUCTS INSIDE AND OUT AND HAVE ON

NUMEROUS OCCASIONS HAVE TALKED WITH THE TECHS AT BALMAR ON

ISSUES.I HAVE SET UP MANY 3 STAGE REGULATORS WITH ALTERNATORS,

SO ITS NOT LIKE I JUST STUCK NEW PARTS IN USED CASES. IF YOU HAVE

 ANY QUESTIONS FEEL FREE TO CONTACT ME AND I WILL TRY TO GET YOU

AN ANSWER.