Bell Br.1 Auto Racing Helmet Sa2010 - 2x-small (54-55) / Matte Black on 2040-parts.com
Champaign, Illinois, United States
|
Limited Availability - Please contact us to confirm availability *Sale Price $359.96 (MSRP $459.95) Bell BR.1 Helmet - Snell SA2010 Includes: 1-Bell BR.1 Helmet, 1-Clear Shield, 1-Tearoff Posts, 1-Hans Pre-Drilled Holes. Shipping
The BR.1 features a lightweight composite shell, leading-edge styling and a large eyeport. The standard BR.1 is sold in the standard helmet configuration that utilizes rear facing vents and a venturi ventilation system to exchange air inside the helmet. As air flows over the helmet, the venturi effect increases cooling inside the helmet and prevents shield fogging by creating a vacuum to pull airflow thought the helmet. The helmet's rear facing chin bar vents and top vent provide ventilation while preventing dirt and dust from entering the helmet. Thanks to the versatility of the BR.1, racers no longer have to choose between a side forced air or top forced air model. By installing either the side (left) forced air or top forced air kit (kits sold separately), the BR.1 becomes a full ventilation forced air helmet. By using the kit system, racers can easily switch the BR.1 to the appropriate configuration for their type of racing. The BR.1 incorporates Bell's air chamber technology to increase pressure and accelerate airflow (when used with an external forced air system) to maximize airflow for improved ventilation and comfort. Bell's 2011 forced air helmet features the new Quick Lock forced air nozzle that locks the forced air connector in place yet allows for easy release. The smaller nozzle design helps accelerate airflow into the helmet. The Quick Lock nozzle can be used with traditional 1 diameter forced air hoses by using the following forced air adaptor that connects the hose with the Bell Quick Lock nozzle. The BR.1 also features Bell's redesigned face piece with recessed areas that allow for seamless radio integration and easy installation. Racers can also customize the fit of the BR.1 by using Bells Cheek Pad Inserts in 5mm, 10mm, 15mm and 20mm sizes to tighten the fit in the cheek area. The helmet is available in White and Rubberized Matte Black finish the rubberized surface is more resistant to finger prints and smudges than traditional flat finishes. The BR.1 is pre-drilled for use with head and neck restraint devices.
*Accessories: Shields, Tearoffs, Han Post, etc. can be added to your order at an additional cost.
Measure the circumference of the head at a point approximately one inch above the eyebrows in front, and at a point in the back of the head that results in the largest possible measurement. Take several measurements. The largest measurement is the one you want to use. Please don't guess your size or go by the size of a previously owned helmet. Helmet manufactures vary in size.
Customer Support
Terms and Conditions http://stores.ebay.com/Hyatt-Racing-Products/Terms-and-Conditions.html |
Racing Gear for Sale
Bell br.1 auto racing helmet sa2010 - x-small (56) / matte black(US $359.95)
Bmw genuine oem bmw baby racer ii 80-93-2-284-553(US $114.19)
Bell gp.2 cmr kart racing helmet cmr2007 - 6 3/4 (54) / white(US $399.96)
Bell gp.2 cmr kart racing helmet cmr2007 - 7 1/4 (58) / white(US $399.96)
New arai gp-5 shield light tint original (helmet visor)(US $70.00)
Arai visor/shield tear-offs gp5 helmets 10-pack (ten tear-offs)(US $50.00)
The Toyota FT-1 concept would make a damn fine new Supra
Mon, 13 Jan 2014The Detroit auto show is just getting started, and Toyota has kicked things off with a nice surprise: The racy FT-1 concept. A product of Toyota's Calty Design Research facility, the FT-1 concept shares some of the swoops and vents with the Lexus RC F. But there's a boatload of high-performance styling cues there, too: Take a quick glance and you might spot the front end of a Ferrari Enzo, the profile of the Nissan GT-R, the double-bubble roof of the SRT Viper/any number of Zagato creations and the oversized retractable rear wing of the McLaren P1.
Peugeot HX1 Concept – a low-riding MPV – to debut at Frankfurt 2011
Mon, 29 Aug 2011Peugeot HX1 Concept – a low-slung MPV Don’t look at the Peugeot HX1 Concept and think you’ll be walking in to your local Peugeot showroom next year and driving off in one, because you won’t. The HX1 is a showcase for where Peugeot sees the brand going in terms of “…architecture, aerodynamics, modularity, equipment, interior materials, the environment and powerplants.” Just like so many concepts from Peugeot of late – the funky HR1 Concept and the almost Aston Martin-esque SR1 spring to mind – the HRX1 is a crackingly good-looking car. A bit like a Mercedes R-Class with a proper injection of Gallic style and flair.
New bosses for Volvo and Ford of Europe
Thu, 15 Jul 2010Volvo will shortly have a new boss, it was announced today. Geely Motors is buying Volvo from Ford and the two companies confirmed today what we all suspected: that Volvo CEO Stephen Odell will leave the top office in Gothenburg and head up Ford of Europe. The new chairman of Volvo is Li Shufu, Geely's top man.