Bell Br.1 Auto Racing Helmet Sa2010 - X-small (56) / Matte Black on 2040-parts.com
Champaign, Illinois, United States
|
Limited Availability - Please contact us to confirm availability *Sale Price $359.96 (MSRP $459.95) Bell BR.1 Helmet - Snell SA2010 Includes: 1-Bell BR.1 Helmet, 1-Clear Shield, 1-Tearoff Posts, 1-Hans Pre-Drilled Holes. Shipping
The BR.1 features a lightweight composite shell, leading-edge styling and a large eyeport. The standard BR.1 is sold in the standard helmet configuration that utilizes rear facing vents and a venturi ventilation system to exchange air inside the helmet. As air flows over the helmet, the venturi effect increases cooling inside the helmet and prevents shield fogging by creating a vacuum to pull airflow thought the helmet. The helmet's rear facing chin bar vents and top vent provide ventilation while preventing dirt and dust from entering the helmet. Thanks to the versatility of the BR.1, racers no longer have to choose between a side forced air or top forced air model. By installing either the side (left) forced air or top forced air kit (kits sold separately), the BR.1 becomes a full ventilation forced air helmet. By using the kit system, racers can easily switch the BR.1 to the appropriate configuration for their type of racing. The BR.1 incorporates Bell's air chamber technology to increase pressure and accelerate airflow (when used with an external forced air system) to maximize airflow for improved ventilation and comfort. Bell's 2011 forced air helmet features the new Quick Lock forced air nozzle that locks the forced air connector in place yet allows for easy release. The smaller nozzle design helps accelerate airflow into the helmet. The Quick Lock nozzle can be used with traditional 1 diameter forced air hoses by using the following forced air adaptor that connects the hose with the Bell Quick Lock nozzle. The BR.1 also features Bell's redesigned face piece with recessed areas that allow for seamless radio integration and easy installation. Racers can also customize the fit of the BR.1 by using Bells Cheek Pad Inserts in 5mm, 10mm, 15mm and 20mm sizes to tighten the fit in the cheek area. The helmet is available in White and Rubberized Matte Black finish the rubberized surface is more resistant to finger prints and smudges than traditional flat finishes. The BR.1 is pre-drilled for use with head and neck restraint devices.
*Accessories: Shields, Tearoffs, Han Post, etc. can be added to your order at an additional cost.
Measure the circumference of the head at a point approximately one inch above the eyebrows in front, and at a point in the back of the head that results in the largest possible measurement. Take several measurements. The largest measurement is the one you want to use. Please don't guess your size or go by the size of a previously owned helmet. Helmet manufactures vary in size.
Customer Support
Terms and Conditions http://stores.ebay.com/Hyatt-Racing-Products/Terms-and-Conditions.html |
Racing Gear for Sale
Bmw genuine oem bmw baby racer ii 80-93-2-284-553(US $114.19)
Bell gp.2 cmr kart racing helmet cmr2007 - 6 3/4 (54) / white(US $399.96)
Bell gp.2 cmr kart racing helmet cmr2007 - 7 1/4 (58) / white(US $399.96)
New arai gp-5 shield light tint original (helmet visor)(US $70.00)
Arai visor/shield tear-offs gp5 helmets 10-pack (ten tear-offs)(US $50.00)
Bell gp.2 youth auto racing helmet sfi 24.1 - 2xs (54-55) / metallic pink(US $239.96)
Toyota/Scion coupe specs reach the Internet
Mon, 31 Oct 2011Specifications for the Toyota FT-86 and Scion FR-S coupes have leaked on the Internet via scanned images of the training manual, posted at www.ft86club.com. If the site's translations are correct, the 2,667-pound coupe will use a 2.0-liter flat-four engine that makes 197 hp at 7,000 rpm and 150 lb-ft of torque at 6,600 rpm. It looks as if the FR-S will come in two trim levels: a higher-spec variant that features a limited-slip rear differential in both manual and automatic versions of the car and a lower-spec model that has only the limited-slip diff with the manual transmission.
Mercedes Benz CLK-GTR – the Unique RHD versions
Fri, 13 Feb 2009The unique RHD Mercedes Benz CLK-GTR The CLK-GTR is a by-product of Mercedes’ involvement in the FIA GT1 class in the late ’90s. A condition of entry for cars was that road-going versions had to be made, so Mercedes (along with Porsche, who built the even rarer Porsche 911 GT1 to compete in the series) bit the bullet and produced a very limited run of the GTR. Despite a passing resemblance to a CLK, the only parts that were actually CLK were the grill and the dash housing.
Tesla presents the $0.06 quarter-mile run
Fri, 14 Jun 2013How much fun can you have for six cents? Depends on how much fun you consider crushing a Dodge Viper on the quarter-mile in a Tesla Model S. We showed you a video of that feat a while ago.