Find or Sell any Parts for Your Vehicle in USA

Bell - Infusion Ev Extended Vision Snell Sa2010 / Fia8858 Auto Racing Helmet on 2040-parts.com

Location:

Nashville, Tennessee, United States

Nashville, Tennessee, United States
Condition:New with tags Brand:Bell Country of Manufacture:United States Make:Bell Racing Snell Rating:SA2010 Rated Manufacturer Part Number:202917 FIA Rating:FIA8858 Rated

Bell - Infusion EV SA2010 / FIA8858 Auto Racing Helmet
Fly Racing


The Infusion EV features a huge eyeport (largest available in the Bell line) and builds on the versatility of the Star Infusion and BR-1 models. The Infusion EV (Extended Vision) is SA2010/FIA8858 certified. Sold in the standard helmet configuration, the Infusion EV features a new rubber visor seal to prevent dust and dirt from entering the helmet, pro-style comfort interior and a lightweight composite shell.

The Bell Infusion EV Helmet carries the Snell SA2010/FIA8858 ratings which certify it for use in competitive racing until the end of the year 2020.

By utilizing an innovative kit system, racers who prefer a wide eyeport can now customize the Infusion EV to adapt to different forms of racing. Thanks to the versatility of the Infusion EV, racers can use the helmet as a standard model or add full ventilation to the helmet by installing either the side (left) forced air or top forced air kit. By using the kit system, racers can easily switch the Infusion EV to the appropriate configuration for their type of racing. The Infusion EV incorporated Bell’s air chamber technology to increase pressure and accelerate airflow (when used with an external forced air system) to maximize airflow for improved ventilation and comfort.

The Infusion EV is certified to the Snell SA2010 and the FIA8858 standard. The FIA8858 certification requires the helmet to be tested for use with Head and Neck Restraint Devices. Bell's M6 terminal hardware is incorporated into the helmet and accepts Head and Neck Restraint anchor system hardware. The Infusion EV is compatible with FIA8858-2010 and is recognized by the FIA for use outside of North America.

The Infusion EV takes a 288 (3MM) SRV Shield which features the SRV-1 pivot system and thumb tab on the drivers left side to allow for easy shield operation. Each helmet comes with a clear shield and Bell visor strip as standard equipment. The Infusion EV also features Bell's redesigned face piece with recessed areas that allow for seamless radio integration and easy installation.

Detailed Specs
  • Huge Eyeport for Extended Vision
  • Sold in Standard Helmet Configuration
  • Side Air and Top Air Kits Available
  • Lightweight Carbon Composite Shell Technology
  • Pro-Style Comfort-plus Interior
  • New Rubber Visor Eyeport Seal
  • Recessed Face Piece for Seamless Radio Integration
  • E-max Multi-density Liner
  • M6 Terminal Hardware for Head & Neck Restraint Devices
  • 288/3mm SRV Shield (SRV-1 Pivot System)
  • Snell SA2010 Certification
  • FIA8858-2010 Certification







This helmet carries the Snell SA2010 rating which is approved for use until the end of the year 2020.

http://www.smf.org/images/decals/sa2010decal.jpg

The rating refers to the standard date the helmet adheres to. The ones you are likely see are SA2005, SA2010, and SA2015. Every 5 years, Snell releases a new standard which is a new series of tests the helmets must pass in order to receive the new rating. The rating a helmet receives generally means it's legal for use in most event types for 10 years from the rating:

  • SA2005 - Good until 2015
  • SA2010 - Good until 2020
This helmet carries the Snell SA2010 rating which is approved for use until the end of the year 2020.



Bell Helmet Sizing

Proper helmet fit is vital to the performance of a helmet during an impact.
For the helmet to perform properly during an impact, it must stay securely on the head.

Measuring the head is only a starting point for the entire sizing procedure.
Due to varying shapes, heads that are apparently the same size when measured may not necessarily fit the same size helmet.

A small metal tape measure or a cloth tape may be used to make your initial measurement. You can also use a string, which can then be laid against a measuring tape.

Measure the head from a point one inch above the eyebrows and around the back of the head that results in the largest possible measurement.

Take several measurements. The largest measurement is the one you want to use.






Contact Us:
Feel Free to send us any questions through eBay messaging!
   
Shipping:
All orders $250 and above including shipping must have a signature confirmation on delivery. Please keep this in mind when ordering. The timeframe quoted by eBay for delivery may not always be accurate. If you are unsure, please contact us and we can advise when to expect an order.

International Shipping, if available:
Import duties, taxes and charges are not included in the price of the item or shipping costs.  These charges are the responsibility of the buyer.  Please check with your country's customs office before bidding to determine what those charges will be.  The timeframe quoted by eBay for delivery very often is not accurate for international orders. Please contact us if this is a concern.

Racing Gear for Sale

VIA Motors to bring electric vehicle lineup to LA Auto Show

Wed, 13 Nov 2013

Via Motors will be displaying its range of electric trucks at the upcoming LA Auto Show, and visitors will get the opportunity to try its VTRUX vehicle. Haven't heard of VIA Motors? It's an EV startup with a factory in Mexico that will outfit full-size GM pickups and vans with its own extended-range electric powertrain.

Vauxhall Monza concept stars at the 2013 Frankfurt Motor Show

Wed, 11 Sep 2013

Vauxhall is reviving its famous ‘Monza’ nametag here at the 2013 Frankfurt Motor Show, evolving the ethos of the large, two-door, four-seat coupe – and how. The Monza concept really is quite spectacular. The crowds near-permanently surrounding it attest to that.

Watch sinkhole form at National Corvette Museum

Thu, 13 Feb 2014

The National Corvette Museum in Bowling Green, Ky. has released security-camera footage showing the formation of the sinkhole that swallowed eight rare cars yesterday. The 40-foot-wide sinkhole, which could be between 25 and 30 feet deep, opened at roughly 5:44 a.m.