Billet Hemi Valve Covers Fits 5.7, 6.1 & 6.4 Cnc Aluminum Hot Rod Finned on 2040-parts.com
San Marcos, California, United States
|
First thank you for looking at our valve covers. FITMENT 2003 to 2015 using 2006 up coil packs... also available for remote mount style, special order. if you have questions send us an email. Machined from solid 41.lb billet block of 6061 aluminum air craft grade material if you don't care for technical information skip to warranty all of our hemi valve cover designs, currently 3, include all of the technical data listed below. *** 08/06/16 modifications made to original design for fitment now fits for 2003 - 2015 hemi 5.7, 6.1 & 6.4 and some of the aftermarket gen 3 hemi heads, please ask *** 08/10/16 now a pocket is around ea set of plugs that the coil packs sink into *** 08/10/16 added a couple of photos of these painted, red and black and the tops of the fins cleaned. *** 08/10/16 added 2 more fins than original tech specs as follows * all the seal grooves have a small fillet leading into them and the slots are 1/32 deeper than stock, the reason for modification is only to make it easier to install the covers * the floor area where these bolt to the head are 3/8 thick to maintain flatness * the factory rib that other aftermarket manufactures remove we maintained, the factory put it there for a reason, when these engines are 2000+ rpm as much as 2 quarts of oil are inside the valve cover area * the area around the coil towers is 5/16 thick, this thickness is maintained through the long axis of the cover to help seal the coil land area * we revised the structural design inside the covers, we added a bunch of ribs, they don't add to the outside appearance but strengthen the flatness of the coil lands dramatically * the general wall thickness is 1/8. > Available finishes are as machined (for paint), polished and satin. Warranty We want your business and we have a great your happy guarantee. if your not happy you have 10 business days from the time you receive these to send them back (m-f) if you don't like the design send them back if you don't like the finish, send them back if you don't like the fitment, send them back if the box is messed up do not accept the shipment we do not charge a restocking fee we pack stuff to make sure that it doesn't get banged up during shipping. Made in the U.S.A. Limit one set per buyer per 30 day period, to arrange for more sets at a time please contact us first. note from time to time minor changes will be made to make a better product. Installation is same as stock valve covers uses all the same stock seals, gaskets, nuts/bolts etc so you don't use the plastic engine cover. |
Valve Covers for Sale
05 06 07 08 09 10carbon fiber ford mustang 4.6 valve covers --reduced----
Sbc valve covers and airbox lid black/red bowtie chevrolet small block chevy(US $80.00)
Mr gasket chrome valve cover oldsmobile 307
Conquest starion 2.6 mitsubishi script valve cover
Ansen 7636 sb ford aluminum valve covers 347 black(US $186.83)
Corvette valve covers center bolt 350 ncrs. chevrolet small block.
Me and My i-MiEV: Mark's daily blog
Fri, 23 Jul 2010Senior Editor (West Coast) Mark Vaughn is spending the summer in a Mitsubishi i-MiEV. he's chronicling his days and nights in the car in this blog. June 28 The i-MiEV was delivered June 28.
Rolls Royce Ghost EWB launched +video
Tue, 19 Apr 2011Rolls Royce Ghost EWB - a Chinese launch Really, you wouldn’t expect Rolls Royce to release something as common as a long wheelbase Ghost, would you? No, this Ghost is an extended wheelbase Ghost – the Rolls Royce Ghost EWB. When we reported back in December that the LWB Ghost was getting close – and the Ghost DHC and Ghost Coupe, for that matter – we’d half expected Rolls Royce might get a shake on and take the Ghost EWB to Geneva.
BMW poaches designer from Mercedes-Benz
Tue, 14 Dec 2010Karim Habib is returning to BMW to take over as head of exterior design, the automaker announced on Tuesday. Habib spent the first 10 years of his career at BMW. During that time he was responsible for designing the exterior of the current BMW 7-series and the Concept CS.