Boat Bog 200g - Emergency Safety Equipment - Leak Plug (2 For $40) (2btb200w) on 2040-parts.com
Moore Creek, New South Wales, Australia
|
2 for $40 2 x Boat Bog 200g - $40.00 FREE POSTAGE IN AUSTRALIA!
WARM Temperatures - recommended for water temps 27°C / 80°F and above
Boat Bog is an EMERGENCY leak repair product that can be applied in seconds to any water vessel. Boat Bog -
Boat Bog requires no curing or drying time. It can be applied immediately out of the packaging to temporarily stop or slow water inundation through leaking, cracked or breached hulls. Simply push Boat Bog it into the leaking area to immediately patch the leak. The uniquely dense compound is designed to flex with hull movement and withstand reasonable hydrostatic pressure. Boat Bog will stick to aluminium, polyester fibreglass, epoxy fibreglass, plastic, metal, wood, etc. The compound always remains pliable to enable easy removal and to allow for adjustments after application. Boat Bog is extremely versatile and can be used in miscellaneous circumstances (eg. forgotten bungs, leaking icebox coolers, punctured bucket, damaged floats, etc). Boat Bog comes in sealed water tight packaging ideal for storing in your boat, kayak, canoe or yacht. Emergency repairs and maintenance were extremely difficult on the water up until now - Boat Bog is the solution! Boat Bog should be part of your on-board emergency kit, you never know when you're going to need it. Boat bog - don't get caught without it! FAQ
Q. What is Bog? Bog is a putty like substance that has a feel and consistency similar to that of modelling clay. Bog is made from a variety of natural compounds that are blended together following a patented formula and manufacturing process. Each Bog product has been individually formulated to have the unique properties required for its use and application.
Q. Do the Bog products harden or go off? No, our products are specifically formulated to not harden for ease of removal and to allow for subtle movements to the surfaces without comprising the seal of the Bog.
Q. Prior to applying the Bog, is there any mixing required? No mixing is required. Simply knead product until pliable, then apply.
Q. Is Bog a two-part epoxy compound? No, Bog is a single part compound that does not require mixing and requires no curing time. Bog always retains its semi-flexible state so that it can withstand subtle movements and can be easily removed at any time.
Q. Are the Bog products flammable or toxic? No, the Bog products are non-flammable and non-toxic. Although, commonsense applies - do not eat!
Q. How do I remove the Bog products? Scrape off the product using fingers or a small spatula, then wipe the area vigorously with a cloth. Any residual product can be removed using a degreaser. NOTE: Degreaser can damage certain surfaces, test before applying. DO NOT USE degreaser on surfboards/SUPs/etc.
Q. How do I remove the Bog residue from my hands and fingers? Wipe hands with a dry cloth and then wash with soap and water.
Q. Does heat or cold affect the Bog products? Yes, hot temperatures will affect the Bog - do not use on surfaces with temperatures above 50°C/122°F. In cooler temperatures, the Bog may require more kneading to become pliable. However, the cold will not affect the performance of the product.
Q. Why are there two different temperature ranges for Boat Bog and Board Bog? Bog becomes slightly more pliable in warmer temperatures, so the formulas are adjusted to suit the temperature range that the Bog is intended to be used in. The higher temperature range Bog is a stiffer product. Please note, both the COOL and WARM formulas will work in temperature ranges outside those recommended. The WARM Bog will just simply require more kneading before use in cooler temperatures and the COOL Bog will become slightly more pliable in warmer temperatures. TEMP RANGES: COOL Bog is recommended for temps up to 27°C / 80° F WARM Bog is recommended for temps above 27°C / 80°F
Q. Do the Bog products have a shelf life? No, our products are not subject to degradation over time.
|
Safety Gear & Devices for Sale
Boat bog 200g- emergency safety equipment - leak plug (2 for $40) (1btbw1btbc)(AU $40.00)
Attwood bellow signal horn lung powered model 2460-7(US $16.00)
Grab bar rail for jon boats stand up adjustable powdercoated lightweight(US $49.99)
Xintex m-1-r 2" gasoline fume detector w/ plug-in sensor model# m-1-r(US $156.88)
Xintex 2" propane detector w/ plug in sensor - no solenoid model# s-1(US $154.88)
$50 rebate acr resqlink+™ 406 mhz gps plb floats w/o pouch mfg# 2881(US $321.88)
Ford recalls 2013 Escape, Fusion
Mon, 03 Dec 2012Ford Motor Co. is recalling about 89,000 2013 Ford Escape crossovers and Fusion sedans with 1.6-liter engines that may overheat and cause fires. Ford estimates that the voluntary recall covers about 73,320 Escapes and 15,833 Fusions in the United States and Canada.
Toyota FT-HS Concept (2007): first official pictures
Sun, 03 Jun 2007By Tim Pollard First Official Pictures 03 June 2007 02:33 Toyota FT-HS Concept: the lowdown Salvation for supercar lovers in the 21st century: Toyota has turned its hand to creating a sports coupe with green credentials - and the futuristic FT-HS Concept mixes green with mean rather well, we think. Don't believe us? Well, how about 0-60mph in four seconds and 400bhp from a 3.5-litre V6 hybrid drivetrain - in a car that runs silently on electric power through town, with nothing more troubling than an electric whirr from the quad tailpipes.
Mercedes tease the 2014 S Class with a work of art
Wed, 05 Sep 2012The 2014 Mercedes S Class isn’t due to be revealed until 2013, but Mercedes will be teasing it at the Paris Motor Show with a sculpture. New car model teases usually take the form of dark photos or photos showing obscure detail. But Mercedes are taking a different route with the new S Class with an artistic sculpture.