Find or Sell any Parts for Your Vehicle in USA

Boost Solenoid Valve Bcs 4port High Frequency & Heat For Aem/megasquirt Etc Ac on 2040-parts.com

US $65.90
Location:

Colorado Springs, Colorado, United States

Colorado Springs, Colorado, United States
Condition:New Country/Region of Manufacture:United States Manufacturer Part Number:C7-46F-HF-CB Brand:CIRCUIT SE7EN

 Check out our  other items!

Be sure to add us to your favorites list!

 Universal 4 port boost control solenoid , typically used with wastegates that have 2 ports.  Allows a wider range of boost control than any other method, for a given spring, because full boost can be applied on either side of the wastegate diaphragm.  This is used when you need more dynamic range than a 3 port solenoid can provide.  (We also offer Mac 3 port solenoids).

HIGH FREQUENCY version Allows finer control (better resolution) when controlling both sides of a dual port wastegate actuator (usually external ,sometimes internal/swing gate)
 This is ideal for running at ~20  HZ, (high resolution).It has good linearity up to 20 HZ from 10-80% duty cycle %.   Frequency is  selectable in most ECU software.
 Advantage to running at high frequency is higher resolution (less time between cycles to change the duty).
 This valve does have the MAC  high temperature build option. Cycling wear can be minimized by smart programming (de-energize valve in the appropriate load cells ranges)
This is a MAC  valve modified for us at the factory by MAC for higher frequency.
Some people have problems transitioning from  a 3 port set up to a 4 port setup, the diffirence in frequency respons of the 3 port vs the 4 port  can be part of the difficulty, this High frequency version of the 4 port valve was made to address that.
see here for tech info >>>>>>>>> :http://circuitse7en.net/page26.php 

 The same valve that many manufacturers re-label and mark up, why pay for a sticker?

 Includes (4) 3/16" brass hose barb fittings and one sintered vent/muffler.
All the Ports are 1/8 NPT so you can use any common fitting that you want including AN-adapters.  
Also includes one sintered high flow air muffler/vent filter. The sintered filter makes the installation easier & cleaner because you don't have to run another hose to your air cleaner.

The fittings are injcluded (brass).We do not include AN type fittings, as most want the hose barbs and we are aiming to be the lowest cost supplier of these valves,we don't want you to pay extra for something you don't need. If you want AN fittings email us and we can supply them.

This boost control solenoid  will not degrade from  rich fuel mixtures or oil . Very high life and very resistant to sticking from contamination. 

  • BRACKET INCLUDED , CNC'd 6061-T6 very high quality, ROLLED Threads, stainless screws, YOU supply correct length M6 (preferred) or 1/4" countersunk screw for chassis mounting. (ACE hardware).
  • Bracket also fits our MAC 3 port valves, vibration isolator(s) optional. Less expensive than buying the bracket separately.  r
  • Leads are 18" long.
  •  12 volt DC , polarity not sensitive.
  • 5.4 watts
  • 10-90% duty cycle
  • 1/8" npt ports
  • compatible with many & most boost controllers and ECU's : AEM,Autronic,E-boost etc,Neptune, Hondata,ECtune,Megasquirt,VEMS.
  • (4 ) 3/16" bhose barbs nipples
  • (1) sintered vent/muffler
  • This is an industrial quality valve, Autronic,e-boost and AEM have been using them for years on everything from rally cars to drag cars, there is a reason they use this valve, it is very durable and responsive.
  • Contact us for installation tips.
  • This valve can be driven by many stock ecu's as well as many aftermarket stand-alones and regular stand alone boost controllers.   
  • See our other items if you are looking for  a 3 port   MAC 35A-AAA-DDBA-1BA   
  • IT IS UP TO the PURCHASER to decide if this valve is suitable for it's intended use the seller will not be responsible for damage of any kind that may occur due to the use of this product!!!
YOUR SHIPPING ADDRESS MUST BE CONFIRMED WITH PAYPAL DO NOT ORDER OTHERWISE.

 


                               INTERNATIONAL INFORMATION:   
YOUR SHIPPING ADDRESS MUST BE CONFIRMED WITH PAYPAL DO NOT ORDER OTHERWISE.  
  Interested in large quantity   contact us :robertoATcircuitse7enDOTnet  (modify the anti spam spelling)
NEW  International shipments are all EXPRESS 4-6 day delivery on average,worldwide.
NEW  International shipments,include free shipping insurance and tracking !!! .
For SOME countries LOW COST USPS priority mail is available here :  http://www.ebay.com/itm/330681004581?item=330681004581&viewitem=&vxp=mtr#ht_2012wt_1165 
  
 International orders are shipped via USPS First Class EXPRESS International  
 International orders ; we charge a flat fee for up to 10 valves, you MAY NOT order more than 8 at once. (Make 2 separate orders if you want more than 8). This is because the flat rate envelope will only allow room for 8 pieces.
      So for 1-8 valves the shipping cost is the same , so more is the better value!
The shipping and handling cost include: insurance,filling out customs forms,filing out express forms and the actual postage,and the packaging materials and labor time.
Sorry we used to allow the cheaper first class int'l shipping, but it has become too unreliable.Currently we are sending "test" packages worldwide to test first class  reliability.  If you want to try  First Class Mail now (it saves money), email here: robertoATcircuitse7enDOTnet



30 day warranty on items returned if cosmetically perfect. So test it before mounting it! (contact with mounting points may blemish it)
15% handling fee on returned items.
(these valves are all tested before they are shipped and they are very robust ,we have not had any returned to us ever!)

 

MG CS SUV Concept heading for Shanghai Motor Show

Thu, 11 Apr 2013

MG are still struggling to make much of an impact on the car landscape, but one car that could change that is a funky urban crossover / SUV to give cars like the Nissan Juke a run for their money. That looked to be on the cards last year when MG turned up at the Beijing Motor Show with the MG Icon, an SUV.Crossover Concept that took the ‘Ugly but Cute’ style cues from the Juke but grafted on a nose that looked like it could have come from MG’s sports car past. The Icon was a decent effort – and even won an award for ‘Best Concept’ at Beijing from Autoweek – but it looks like MG has decided the design of the Icon was just a bit too radical, so they’ve toned it down with a new concept heading for this year’s Shanghai Motor Show – the MG CS Concept.

Caterham Seven to use Suzuki three-cylinder turbo power (2013)

Mon, 05 Aug 2013

Caterham has announced its new entry-level Seven will cost less than £17,000 and use a three-cylinder, turbocharged engine sourced from Suzuki. The new car will go on sale in the autumn of 2013, with first customer deliveries expected in November. What’s the specification of the new Caterham Seven?

Winners named in teen-safety video contest

Tue, 01 Sep 2009

Sometimes, the best way to get a teen's attention is to let another teen do the talking. Especially when it involves a subject such as driver safety, which many teens tend to tune out as just another lecture from parents. Tire maker Bridgestone Americas adopted the teens-talking-to-teens philosophy in 2006 with its Safety Scholars video contest.