Find or Sell any Parts for Your Vehicle in USA

Bottom Paint Vivid Antifouling Pettit Gallon 93 1261g Blue on 2040-parts.com

US $195.00
Location:

Dothan, Alabama, United States

Dothan, Alabama, United States
Condition:New Brand:Pettit Country of Manufacture:United States Manufacturer Part Number:1261G

New, Unopened Gallon of Petit Vivid Bottom Paint in blue.  We bought too much and can't send it back, so we decided to offer it here.  Below is the technical data from the retailer.  We used this same paint for a recent bottom job on our dive boat and were incredibly surprised how easy it is to apply and how well the project turned out.  If you're considering doing your own bottom job, this paint is easy to apply, simple to clean up, and creates a beautiful finish.

PayPal Only and Continental U.S. shipping only 


Finish: Flat 
Curing Mechanism: Solvent Release 
Solids (theoretical): Weight- 83 +- 2%, Volume- 65 +- 2% 
Coverage: 440 sq. ft/gal. (includes a 15% loss factor) 
VOC: 330 g/l max. (as supplied) 
Flash Point: 110Deg F (SETA) 
Application Method: Brush, Roller, Airless or Conventional Spray 
Number of Coats: 2 or 3 
Dry Film Thickness per Coat: 2 mils 
Wet Film Thickness per Coat: 3.1 mils 
Application Temp: 40Deg F. Min., 90Deg F. Max.

APPLICATION INFORMATION
Vivid contains cuprous thiocyanate and as a result of this there is a tendency for settling to occur, especially if the paint has been on the shelf for several months. It is necessary to thoroughly mix the paint before using. If possible, shake the can of paint on a mechanical paint shaker. Before using, check the sides and bottom of the can to make sure all the pigment has been mixed in. If mixing is going to be done with a wooden paddle or an electric drill mixer, pour off half of the liquid from the top of the can into another can and then properly mix in any settled pigment; then remix the two parts together thoroughly.

Adhere to all application instructions, precautions, conditions, and limitations to obtain optimum performance. Refer to individual labels and tech sheets for detailed instructions when using associated products, etc. Vivid is a high solids products. Do not apply this paint in thick films or in more than four coats as poor adhesion may result. When applying by roller use a short nap (3/16 inch maximum) roller cover. Product can be thinned up to 10% (12 ounces per gallon) without any loss in performance. Do not thin beyond your state's compliant limit.

SURFACE PREPARATION
Coating performance, in general, is proportional to the degree of surface preparation. Follow recommendations carefully, avoiding shortcuts. Inadequate preparation of surfaces will virtually assure inadequate coating performance.

MAINTENANCE
No antifouling paint can be effective under all conditions of exposure. Man made pollution and natural occurrences can adversely affect antifouling paint performance. Extreme hot and cold water temperatures, silt, dirt, oil, brackish water and even electrolysis can ruin an antifouling paint. Therefore, we strongly suggest that the bottom of the boat be checked regularly to make sure it is clean and that no growth is occurring. Lightly scrub the bottom with a soft brush to remove anything from the antifouling paint surface. Scrubbing is particularly important with boats that are idle for extended periods of time. The coating is most effective when the boat is used periodically.

*The below dry times are minimums. Vivid may be recoated after the minimum time shown.

 

  • Excellent antifoulant for aluminum, fiberglass, wood and steel.
  • Hard low drag finish that can be sprayed and burnished for a racing advantage.
  • Tin free and not restricted in use.
  • Available in five clean bright colors including 1161 White, 1661 Red, 1261 Blue, 1861 Black and 1461 Yellow.
  • Colors can be combined to achieve a rainbow of new clean bright bottom paint colors.
  • Meets VOC regulations with a low 330 grams per liter.
  • Contains two biocides the slime resistant zinc pyrithione algicide and cuprous thiocyanate.
  • Ideal for use on fiberglass, wood or aluminum
  • Multi-season
  • Great for trailerable boats
  • Compatible with most antifouling paints
  • Can be hauled and launched with little wear

Mercedes-Benz Concept S-class coupe bows at Frankfurt motor show

Tue, 10 Sep 2013

Mercedes-Benz previewed its upcoming S-class coupe at the Frankfurt auto show, revealing this lightly veiled concept car. Set to replace the 7-year-old CL, the muscular-looking two-door teases the production model, planned to be rolled out at the Detroit auto show in January. U.S.

Smart to sell Nissan-built car in U.S. in 2011

Wed, 06 Oct 2010

The U.S. distributor of Smart cars says it has a tentative deal with Nissan to sell a small, five-door car built by the Japanese automaker under the Smart brand, beginning in late 2011. Smart USA Distributor LLC, which is owned by Roger Penske's Penske Automotive Group, said the car would be powered by a gasoline engine and fit the B-segment size class.

Pforzheim University - Honda F1 'off track' project

Fri, 19 Sep 2008

Students of the Masters in Transportation Design course at Pforzheim University in Germany have been working on a rather special project: to create designs for ‘off-track' cars for Honda's F1 drivers Jenson Button and Rubens Barrichello, incorporating Honda's environmentally conscious fuel-cell technology. Sponsored by Honda R&D Europe, the project has been running for the last three years. This year the vehicles had to be designed with a theme based on a GP host country of each student's choice.