Brand New Time-sert Spark Plug Repair Kit 4412e on 2040-parts.com

HOW TO REPAIR DAMAGED SPARK PLUG HOLES

The repair of stripped out spark plug holes are easy to fix, with the TIME-SERT® Spark Plug repair kits!

	KIT CONTENTS 1. Wrench 2. Step-Tap 3. Insert Driver 4. Seat Cutter   Inserts sold separately - WARNING - Cutting tools may shatter if broken. The wearing of safety glasses is required in the vicinity of their use.
	Start the step tap into the hole to be repaired keeping as straight as possible.
	Use the wrench provided, place wrench over tap and tap new threads. Continue to tap through until the cutting edges are approximately 1/4 inch below surface. Leaving the tap 1/4 inch below the surface ensures that the seat cutter will not hit the back of the tap flutes.
	Leave the step tap in the hole. Place the seat cutter over the shank. The seat cutter does two operations. First the seat cutter will cut the countersink for the flange of the insert, then it cuts a new seat for the sparkplug washer. This operation is the same for the taper seat inserts.
	Using the wrench rotate the seat cutter. After a few turns lift the seat cutter to inspect the seat. Repeat operation until the seat is completely cleaned up. Remove the step tap from the hole. Good Seat Complete Bad Seat Incomplete
	Make sure the hole is clean and dry. Lubricate the driver tool with Time-Sert driver oil. Screw the insert onto the prepared hole. If doing deep hole repairs: Lubricate the driver tool with Time-Sert driver oil or 30wt Oil. Screw the insert onto the driver then into the prepared hole.
	Using the wrench provided rotate the driver into the insert. When the insert is seated the driver will tighten up. With increased pressure continue to rotate the driver through the insert until it loosens up. Then back the driver tool out of the insert. Note: Taper seat inserts These inserts are silver plated and require sealer p/n 6020 on the outside of the insert.
	- Section View - Repair is complete. Solid steel threads are square to the reconditioned seat, insuring a good spark plug seal.

When our company opened on October 1st 1993, our mission statement became a way of life for us. Our passion for performance enabled the company to offer a nationwide 3 year unlimited mileage warranty unheard of in the industry. Imitation is the sincerest form of flattery, so when some companies followed suit, we knew we had set a benchmark for excellence and customer service. By 1994 Promar Engines had grown to 72 employees. That same year New Jersey Business News Magazine named Promar Engines one of its top 25 fastest growing companies in New Jersey.

The PERA has awarded Promar Engines "Engine Rebuilder of the Year 2003". We take great pride in participating with organizations such as: The BBB, AERA, PERA, AAIA, AJE, AJA and APRA.

Here at Promar Engines we continue to reach new levels of customer service while offering consumers a wide range of services:

  » Remanufactured Engines
  » Cylinder Heads
  » Crankshafts
  » Diesel Engines
  » Marine Engines
  » State-Of-The-Art Machine Shop
  » Classic Automotive Engine Restoration
  » Performance Engines
  » Parts

Promar Engines is located in the original facility at 10 Peach Street in Paterson, New Jersey.

We know that in this industry consumers have many choices. We want the opportunity to prove to you our commitment to excellence. Once you have chosen Promar Engines for your automotive needs, you will become our greatest testimonial.

If you have any questions please feel free to call toll free @ 1-800-422-6022.