C&l 76mm 19# Maf Mass Air Flow Meter, Cold Air Intake Tube, Filter 86-93 Mustang on 2040-parts.com
Ocala, Florida, United States
|
C&L Performance Mass Air Intake System for 86-93 Mustang 5.0 Calibrated for 19 lb. injectors
This auction includes the following brand new items:
These parts fit an 89 - 93 Mustang 5.0 with factory mass air, but will also fit 86 - 88 Mustang 5.0 with mass air conversions. The MAF housing that comes with this system does not have a sensor. You install your stock 89-93 Ford Mustang 5.0L MAF sensor electronics into the C&L 76mm housing. When purchasing this Intake System, the outlet side of the MAF housing is not machined down, like in the picture of the MAF alone. It remains as cast, so you do not need to use any reducing adapter between the MAF and the Inlet Pipe. The MAF housing is calibrated for the stock 19 lb/hr. injectors in a 89-93 Mustang LX/GT 5.0 engine. To recalibrate the MAF for different sized injectors, you can change the sample tube. Different sample tubes are available for 19#, 24#, 30# and other popular Ford injector sizes. Note: The Air Filter ships separately, straight from the manufacturer within approximately 3 to 5 business days. Do you need a chip? We offer custom chip tuning services, and can build a custom tune for your computer for this C&L MAF or a stock MAF, any Ford Racing injectors, aftermarket cams, check engine lights, or just about anything else you need. Check my Ebay store for custom chip auctions. Thanks for looking! I accept Paypal only, please. Buyer must pay for item instantly. All sales final. This product is brand new in the original box. Buyer is responsible for application. Please check fitment before bidding. Free shipping is to the lower 48 states only. Shipping to the lower 48 states will be by either UPS Ground or USPS Priority Mail at my discretion. All other destinations must use USPS Priority Mail shipping option. I only ship to a confirmed physical address. Sorry, no PO Box addresses please. Thanks for looking!! International
Buyers – Please Note:
|
Cold Air Intake for Sale
Bmw m3 2005 dinan intake take off parts
Oil cooler duct/fiber glass(US $35.00)
Camaro 2013 injen cold air intake(US $240.00)
Rear lower strut tower bar for acura rsx 02-06 / 1.6 el 97-00/ civic 96-00 513(US $30.00)
Spa turbo 3” universal air filter blue scientific air flow #ftiar06(US $29.90)
Subaru wrx impreza silicone air intake hose pipe 01-06 3" inlet to td06 turbo(US $99.00)
2011 Mazda2 gets Activematic & Mazda2 Tamura
Fri, 12 Nov 2010Mazda2 Activematic It took Mazda an awfully long time to introduce the 2011 Mazda2 Facelift. In fact the very same Mazda2 nose was already running off the production lines in Thailand in October 2009, so it seems most peculiar that the facelifted cars are only just starting to arrive in UK showrooms. Still, it’s not the end of the world and the 2011 Mazda2 does offer a decent-looking car with a practical choice of engines and trim.
Mercedes Concept Style Coupe – Mercedes CLC to be – leaks out
Wed, 18 Apr 2012Mercedes Concept Style Coupe leaks out early The Mercedes Concept Style Coupe – which previews the baby CLS Mercedes CLC – has leaked ahead of a Los Angeles reveal. We’re still not completely sure that the Mercedes Concept Style Coupe – which is due to be revealed at an event in Los Angeles later in April – will arrive as the Mercedes CLC, but it seems likely. What also seems likely is that it will go down a storm, especially if the photo above (leaked on a Croatian site) is the real deal – it looks stunning.
Honda CR-Z Mugen concept (2011): first photos
Wed, 18 May 2011Honda has teamed up with Mugen again for a new hotrod special - but this one's a hybrid. The new Honda CR-Z Mugen is a slightly more ecologically sound proposition than the banzai 2009 Civic Type R Mugen, and brings the race car treatment to Honda's hybrid coupe. However, at this stage it's a one-off prototype, with no firm commitment to build even a limited run.
