Find or Sell any Parts for Your Vehicle in USA

C&l 76mm Aluminum Cold Air Inlet Intake Tube - Fits 86-93 Mustang With Mass Air on 2040-parts.com

Location:

Ocala, Florida, United States

Ocala, Florida, United States
Condition:New Brand:C&L Performance Surface Finish:Cast Aluminum Manufacturer Part Number:704 Country/Region of Manufacture:United States Placement on Vehicle:Front

C&L Performance 76mm Inlet Pipe for 86-93 Mustang 5.0

*Free Shipping!


Part# 704

76mm "TrueFlow" Inlet Pipe, 86-93 Mustang 5.0L.

*Fits 89 - 93 Mustang 5.0 with factory mass air and 86 - 88 Mustang 5.0 with mass air conversion
*Does not include mass air meter
*Available separately as a kit with mass air meter


Our C&L 76mm Inlet Pipes have fast become our most popular product for 1986-1993 Mustang V8 applications. Dyno testing and development has proven this pipe to be the hot item for those looking to maximize performance on naturally aspirated 5.0L Mustang applications. The "C&L Trueflow" intake pipe retains a full 76mm diameter throughout, unlike other designs that have proven to restrict airflow and hinder system performance. As an added bonus, the cast aluminum C&L Trueflow pipe comes with a boss cast into it for those wanting to use nitrous oxide without damaging the stock rubber intake hose. Dyno testing on many different naturally aspirated 5.0 Mustangs with various levels of modification has shown a typical power gain of 3 to 5 rear wheel horsepower over the stock pipe.

C&L TrueFlow inlet pipes offer three key features which have made them a very popular bolt-on. The cast aluminum finish with blue silicone hoses really dresses up the engine compartment and is much more attractive than the factory black rubber assembly. Due to the fact that these pipes are cast, the inside diameter is consistent all the way through the pipe from the air meter to the throttle body. And by eliminating the flexible ridges in the factory rubber inlet tubes and by controlling the inside diameter for consistency, a modest horsepower gain is achieved.

Most typical vehicles will receive approximately 3 rear wheel horsepower from the inlet pipe alone, but several tests have been reported to show as much as 5 horsepower on some applications. For those who are interested in running nitrous oxide, we have cast a special nitrous boss into each C&L inlet pipe to give you a solid location to drill and tap your nozzle into. Due to the fact that these pipes are solid aluminum and are mounted directly to the engine, we do not recommend mounting the mass air flow unit (through a bracket) to the body of the vehicle. When using an aftermarket intake that relocates the throttle body away from the stock position, it may be necessary to make minor modifications for proper fit.

If used in conjunction with our optional C&L 76mm Mass Air meter housing, a constant 76mm (2.992") I.D. is maintained through the entire inlet tract. This is about as large as you can get for a typical bolt-on 5.0 application. And unlike the cheap chrome-plated stamped steel pipes the competition offers, these aluminum inlet pipes will dissipate heat much better and help keep intake air temps lower. This helps prevent the computer from pulling timing, so you can maintain the full power potential of the engine.

This is the intake pipe only. Does not include mass air meter. Complete 76mm Mass Air Meter and Inlet Pipe combo kits and MAF/Inlet Pipe/Filter combo kits are also available in my Ebay store.

Thanks for looking! 


*Free Shipping is to buyers in the United States only. May not include all of the US territories.


I accept Paypal only, please. Buyer must pay for item instantly. All sales final. This product is brand new in the original box. Buyer is responsible for application. Please check fitment before bidding. Free shipping is to the lower 48 states only. Shipping to the lower 48 states will be by either UPS Ground or USPS Priority Mail at my discretion. All other destinations must use USPS Priority Mail shipping option. I only ship to a confirmed physical address. Sorry, no PO Box addresses please. Thanks for looking!!

International Buyers – Please Note: 

Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility.

Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.




Porsche Panamera images leaked

Sat, 22 Nov 2008

I know, there have been endless spy shots of the Porsche Panamera around for ever. But the car is getting closer, and we now have the first Porsche supplied images surfacing. Not on purpose, mind you.

Volkswagen 'will build the XL1' - Piech

Thu, 27 Jan 2011

Volkswagen will build the radical 313mpg XL1 eco cigar in 2013, Ferdinand Piech revealed at the Qatar motor show. In an interview with Automotive News, the VW chairman said: 'We want to go into series production with this car starting in 2013.' He insisted it would go on sale to real people, not just as media demonstrators. And VW chief exec Martin Winterkorn added the XL1 would be sold in Europe first, then be rolled into the US and Chinese car markets.

Koenigsegg's craziest supercar yet debuts at Geneva

Mon, 03 Mar 2014

Here's what you need to know about the Koenigsegg One:1. It weighs 1,360 kilograms; it produces 1,360 hp. One horsepower per kilogram, which is why mad scientist Christian Von Koenigsegg is absolutely justified in bragging about it: it's the world's first "mega car," he said.