Find or Sell any Parts for Your Vehicle in USA
Car & Truck Parts > Turbos, Nitrous, Superchargers > Nitrous & Parts

Camaro Firebird Corvette Dry Nitrous Oxide Kit Ls1 Ls2 Ls6 No Bottle &brackets on 2040-parts.com

US $209.00
Location:

Bradenton, Florida, United States

Bradenton, Florida, United States
Camaro Firebird Corvette Dry Nitrous Oxide Kit LS1 LS2 LS6 No bottle &brackets, US $209.00, image 1
Condition:New Manufacturer Part Number:DynoTune Brand:DynoTune



 
This auction is for one new DynoTune
Dry Nitrous system for Camaro & Firebird LS1 cars. Bottle/Brackets and bottle nut not included!



This system is made for the mighty Camaro & Firbird LS1 engine. If your looking for a little more HP you cannot get any simpler than this.

This dry nitrous system is full adjustable from 50 to 100HP and up to 175HP with special tuning. The best part is that it works with your factory EFI system.

This Dry system utilizes your factory injectors to add the extra fuel needed to make more power. By spraying Cold Nitrous oxide across the MAF (Mass Air Flow Sensor) it tricks the factory computer into thinking there is a lot more air going into the engine. The Vehicles factory ECM adds additional fuel via the OEM fuel injectors. Simple, clean and very powerful!

This System will work on 8 Cylinder LS1 Engines and comes complete with all the parts and instructions needed for installation. This Dry EFI Kit is the most complete kit available. Quality stainless steel components are standard on all DynoTune Nitrous kits.

This DynoTune Nitrous kit is tuned for Safe reliable Horsepower increase on vehicles with hot wire MAF sensors(most GM vehicles). More and more folks are switching to DynoTune products due to the price, Performance, innovation and support you will get with no other Manufacturer.
Isn’t it time you made the switch? NOTE: Do not use any chips or devices that will advance the ignition timing beyond stock. An increase in Octane or Octane boost may be required for your application.

 

The Kit contains the following:

  • 16 foot braided stainless feed line, blue fittings

  • Solenoid mounting bracket with hardware

  • High Flow Nitrous solenoid

  • 2 foot Braided stainless Nitrous line with Blue fitting.

  • Jets for 50, 75 and 100HP (max 175hp with diffrent jet)

  • Dry Flow Nozzle

  • Lighted arming switch, relay, wire and wire harness, fuse, crimp terminals etc..

  • Micro throttle activation switch and mounting bracket

  • Our 18 page Nitrous installation and tuning book is included! Full pictures and detailed installation instructions for all Dry fuel injection applications

Nitrous & Parts for Sale

Renault Captur (2013) finally to be unveiled at Geneva

Thu, 10 Jan 2013

Renault teased us earlier in the week with a single shady image of the new Captur - and here it is, fully revealed today in all its compact SUV splendour. Coming in the wake of the new Clio’s renewal, the Captur marks the next step-up in Renault’s design offensive. New stylist in chief Laurens van den Acker is rebooting La Regie's wardrobe and you can leave a comment below to rate his latest effort.

Aston Martin reveals the 2012 V12 Vantage GT3 race car

Wed, 24 Aug 2011

Aston Martin V12 Vantage GT3 It’s been mooted for quite a while, but now it’s confirmed – AM are to replace the DBR9S race car with the Aston Martin V12 Vantage GT3. Built on Aston Martin’s now rather ancient V/H architecture modular chassis, the Vantage GT3 also features Aston Martin’s one and only engine – the V12 originally built from a pair of Ford Mondeo engines – which in the GT3 version will produce something in the region of 600bhp and 516lb/ft of torque. What the GT3 also gets – as the photo above clearly demonstrates - are new aerodynamics, which makes the GT3 seem much more aggressive than the V12 Vantage on which it’s based.

GM and Koenigsegg agree Saab sale

Tue, 16 Jun 2009

By Ben Pulman Motor Industry 16 June 2009 11:00 American car giant General Motors has signed a memorandum of understanding for the purchase of Saab by an investment group led by Swedish supercar manufacturer Koenigsegg. That's the deal. Supercar maker Koenigsegg Automotive, together with a consortium of private investors, has formed Koenigsegg Group, which has reached a ‘tentative agreement’ to buy Saab from GM.

2040Parts.com © 2012-2024. All Rights Reserved.

Designated trademarks and brands are the property of their respective owners.

Use of this Web site constitutes acceptance of the 2040Parts User Agreement and Privacy Policy.

0.051 s, 11812 u