Find or Sell any Parts for Your Vehicle in USA

Car Remote Start,push Button Start,pke Alarm,smart Key,immobilizer,keyless Entry on 2040-parts.com

US $189.99
Location:

Shenzhen,Guangdong, CN

Shenzhen,Guangdong, CN
Item must be returned within:14 Days Refund will be given as:Money Back Return shipping will be paid by:Buyer Return policy details: Restocking Fee:No Returns Accepted:Returns Accepted Brand:HTSmart Manufacturer Part Number:HT-N003A Interchange Part Number:N003A Other Part Number:HTN003A Warranty:Yes Country of Manufacture:China Working Voltage:12V Working Temperature:-40~85 Centigrade PKE Main Unit Standby Current: LF Detecting Distance:2 meters Smart Key Working Voltage:DC 2.0V~DC 4.0V Smart Key Standby Current: Remote Control Distance:30~40 meters Push Start Standby Current: Push Start Max Output Current:40 A per IC

**********************************************************************************************************************************************************

Special Notes


We ship this item only by Fast delivery company, such as FedEx , DHL etc.


You'll get not only a product , but also professional technical support  and service.


Once you bid it,we'll be charged a transaction fee,please not bid it if you are not about to pay.


Please pay for it within 4 days after you bid,otherwise,an UPI will be opened automatically.


***********************************************************************************************************************************************************





HT-N003 Car Passive Keyless Entry System


Drivers who have this system don't need to press any button when they lock and unlock their cars. The system can finish most of the work automatically. Drivers only have to do is put the Smart Key in their pocket or purse and take with it.

This is the latest model of our PKE and Push Start products. It is designed based on our over 10 years' PKE designing and manufacturing experience.


Product Features  Function Summary Standard Configuration

  • Car-use Connector
  • TI PKE Chip
  • IC Controlled Ignition, Over-Voltage, Over-Heat, 
       Short-Circuit Protection.
  • 3D-Sense RFID Coil
  • 8 Toogle Switches For Personality
  • lowest Power Consumption
  • Two Kinds Of Wiring Methods To Avoid Conflicting
  • Alarming Through Original Horn
  • HandBrake Detecting For Remote Start Safety.
  • Backup RFID System For Emergency

  • Automatic unlocking/locking
  • Push Button Start
  • Remote Engine Start
  • Smart alarm
  • Immobilizer
  • Window closing signal output 
  • Remote trunk opening(need motor-driven trunk)
  • Locking on first braking(selectable)
  • Automatic power-saving
  • Suspending PKE by remote
  • Emergency Unlocking / Disarming
  • Main Unit * 2
    Smart Key(A type) * 2
    (With Backup Transponders Inside)
    Ignition Button *1
    Main Harness * 1
    Ignition Harness*1
    Trunk Harness * 1
    Shock Sensor *1
    Immobilizer Relay *1
    LF and LF Harness *3
    Use Manual *1
    Wiring Diagram *1
    Backup RFID Module *1
    Backup Antenna * 1 

    Detailed Information

    Special Function: Emergency unlocking/disarming.

    HT-N003 has an additional backup RFID system, which allows users to unlock and disarm the system when the battery of Smart Key is dead, even it is damaged.

    The little system consists of three parts: backup module, backup antenna and backup transponder.

    Backup module will be connected to the main unit, the backup antenna should be pasted on somewhere in the car. The backup transponder is a little circle smart card. We pasted it on the inner side of Smart Key shell during production. Of course, you can paste it onto each of your belongings, such as mobile phone, wallet, etc.

    If you have forgotten changing battery for the smart key and find that you can't unlock your car, don't worry, just put the backup transponder close to the backup antenna and stay for a while, then the backup system will unlock the car for you.


    Passive Keyless Entry (PKE)

    Approach the car, it will be unlocked automatically. Leave the car away 2.5 meters, it will be locked automatically.


    Push the button to start the car

    Get on, step on the brake and push the button, the car will be started. Step on the brake and push the button again the engine will be stopped.


    Remote Engine Start

    Press the 'LIGHT' button on the remote to start the car. Normally, it is used to make the air conditioner working before driving.


    Smart Alarm &Immobilizer

    The system arms/disarms automatically when locking/unlocking. On arming status, if the car was shocked or one of the doors was opened forcedly, the system will alarm through the car horn and turn light. At the same time, the system will cut off the oil supply of the car to prevent it from stealing.


    Windows Can Be Closed Automatically After Locking

    Some vehicles support this function directly; some need to install a Window Closer.

    Window Closer: an electrical device which can drive the window motors to close windows by detecting LOCKING signal. It works independently; don't need to connect with our product.


    Use the remote to find your car

    Press the 'LOCK' button to make the car sounding and light flashing; this can help you find your car fast.


    Use the remote to open car trunk (need motor-driving trunk)

    Press the 'TRUNK' button for a while the system will open the trunk.


    Use the remote to suspend PKE function

    Press the 'LOCK' and 'LIGHT' button together to suspend PKE section, automatic functions will be disabled. Press that two buttons again, PKE will be activated.


    Suspending PKE automatically

    If the car has been left alone for more than 24 hours, the system will stop finding smart key automatically to decrease electricity consumption.


    Locking on First Braking (selectable)

    After the car is started, the system will lock car doors. When the car power is turned off, the system will unlock car doors automatically.

    As many cars have this kind of function already, this function can be cancelled by the switch on the side of the main unit.


    About the  Installation

    1.How many wires should I connect? 

    If you just want to make the system work, you only have to connect the +12V, GND, LF antennas and the central lock wires.
    The number of wires should be connected to the car is determined by the function you need. For example, if you want the turn light to flash when the system alarms, you should connect the two turn light wires. If you want to open the trunk remotely, you should plug the 3P connector into the main unit and connect the 3 trunk wires to your car. 

    2.Which function/configuration can I select by toggling the selection switch?

    You can determine the turn light flashing or not when you open the door.
    You can cancel the ‘locking on first braking’ function if your car has this type of function already.
    If you can’t find door switch signal, you can configure the system to work without it.
    You can configure the ‘window closing’ signal as your demands.
    You can configure the duration of unlocking signal.
    You also can let the system output unlocking signal twice when unlocking.
    If your door switch signal is positive trigger, please open the main box and use the jumper to switch.

    3.If there is a conflict between your product and my car, how can I do?

    Some cars have alarm systems already, if you don’t want to remove them, we recommend that you choose the second installation method to control the central lock. Actually, if you can close your car windows by pressing and holding the LOCK button on your original remote, that is also a good way to get ‘automatic window closing’ function.

    4. How can I know if this product fits for my car?

    This is a universal model for all vehicles which have electric central lock. The installation is about the same as normal car alarm system.Normally, you should connect +12V wire, ACC wire,Central Lock wires,horn wire, ignition wires etc. If you are not sure about the installation,please feel free to email me and get the installation diagram before buying.

    Services & Quality Guarantee

    1.We provide 3 years’ guarantee for all car products. All  products of us have been tested and work well before shipping.

    2.We take no responsibility for damage to car or our product due to wrong connection, soaking, unprofessional installer etc.

    3.All the products all designed and programmed by our own engineer team, if you want some function modification for the products, please feel free to contact us.

    4.I know the products and installation well,please feel free to contact me if you have any questions about the product,you’ll get fast and professional response.


    Shipping Policy

    1. Item location is at China, and we do cross board shipping.

    2. Please be advised that international shipping usually take longer than domestic, as it’s based on shipping service provider and customs. 

    3. All items will be shipped within 48 business hours upon receipt of payment (except Saturday and Sunday).Please see below table to find details service level.

    Service Level

    Destination

    Shipping Provider

    Fees

    Delivery Period

    Tracking Status

    Standard Service

    US

    FEDEX IE/ DHL_C

    Free

    5-10

    Business days

    Y

    Other Countries

    FEDEX IE / DHL_C

    $10

    5-10

    Business days

    Y

    Expedited Service

     or

    Other Service

    US

    DHL/UPS/FEDEX

    $15

    3-4

    Business days

    Y

    UKCAAU 

    DHL/UPS/FEDEX

    $15

    5-7

    Business days

    Y

    Other Countries

    DHL/UPS/FEDEX

    $20

    5-7

    Business days

    Y

    Game Changer? Ford has high hopes for its redesigned 2011 Explorer

    Mon, 26 Jul 2010

    Ford wants you to forget everything you know, or think you know, about its Explorer. The company has high hopes for its all-new SUV, and rightfully so. It's one of the most recognizable nameplates in the auto industry with, according to Ford, a 95 percent name-recognition rate.

    BMW to develop small hybrid with Peugeot Citroen

    Tue, 19 Oct 2010

    BMW are developing a small hybrid with Hybrids may be just a passing fad, but that’s not stopping car makers piling in to them in droves to battle CO2 and emissions targets. For BMW, their hybrid foray has so far been limited to the top end of their range, but that is set to change. We already know that BMW are developing a small, front wheel drive range which will sit underneath the current 1-Series, and it’s for these cars – and possibly for MINI too – that BMW has embarked on a partnership agreement with PSA (Peugeot Citroen) to jointly develop a small hybrid.

    CAR 20 Most Wanted of 2014: Maserati Levante

    Fri, 13 Dec 2013

    By the CAR editorial team First Official Pictures 13 December 2013 09:00 If Maserati’s plot to sell 50,000 cars annually by 2016 is to succeed, the Trident’s super-SUV needs to fly out of showrooms fast enough to give salesmen whiplash. Ambitious? Yes, but Maserati’s up-sleeve trick is getting the platform from sister brand Jeep and its much-improved Grand Cherokee.