* Universal Fit(Good for 4CYL and 6CYL Engine)

Specifications: 

 * This turbo kit is universal.It is for customer custom make project, and perfect upgrade your car and get more boost.Your car will gain 100-150HP if you set at 7-15PSI.Customers require upgrade the fuel pump,injector and ECU to tune the car if you set at higher PSI.This kit can max up to 350HP..

 * THIS TURBO KIT DOES NOT INCLUDE TURBO MANIFOLD AND DOWNPIPE,NEED TO CUSTOM MAKE BY YOURSELF OR BUY IT FROM SOMEONE ELSE.

 * WE OFFER ONE YEAR WARRANTY FOR THIS TURBONETICS TURBO CHARGER IF IT IS INSTALLED BY ASE CERTIFIED MECHANIC!

 * 0.4G'S @ 73.000 RPM;OIL FLOW 26.71ML/SEC.

2.5'' 5 BOLT DOWNPIPE FLANGE:

 * Brand new 2.5'' 5 BOLT DOWNPIPE FLANGE.Made of high quality T304 stainless steel.

 * Direct bolt on this turbo charger.You can use this flange to weld one pipe,and custom make the downpipe for this turbo kit.

UNIVERSAL 2.5'' PIPING KIT:

 * Brand new universal 2.5'' polished aluminum piping kit. Made of high quality T6061 aluminum.

 * THIS PIPING KIT IS UNIVERSAL,IT IS NOT BOLT ON TYPE.CUSTOMERS NEED TO CUT AND BENT THE INTERCOOLER PIPE TO FIT YOUR CAR.

 * 2.5'' inlet diameter,increase more airflow.It come with hight quality 4PLY silicone couplers and strong and tighter t-bolt clamp.it can support up to 400HP.

27''X7''X2.5'' FRONT MOUNT BAR AND PLATE INTERCOOLER:

 * Brand new universal 27''x7''x2.5'' front mount intercooler. Made of high quality T6061 aluminum.

 * Bar and Plate design.High flow and light weight.Support up to 400HP and 35PSI.

 * Compress air flow rate: 700cubic feet/min.

 * Pressure drop: 0.2-0.5 at 15PSI, 2-5 at 35PSI.

 * Full size: 27''x 7''x 2.5''.Inlet/Outlet: 2.5''

 * Core size: 21''x 7''x 2.5''.

 SSQV TURBO BLOW OFF VALVE BOV:

 * Brand new SQV turbo blow off valve bov. Made of high quality CNC billet aluminum and andized finished.Including O-ring,hardware and flange.

 * Our blow off valves is a dual stage pull-type relief valve. Unlike typical push type blow-off valves,will not leak under any level of boost.

 * It is for maximum performance, incorporates both a small primary valve for ultra quick activation, and a larger secondary valve for additional discharge capacity. It is constructed of billet aluminum, which ensures long-term durability and a high luster look.

38MM TURBO WASTEGATE:

 * Brand new universal 38mm wastegate,made of hight quality stainless steel hardware,mating weld flanges are 304L.

 * Set at 7 PSI,comes with two extra 11PSI and 15PSI springs,fully adjustable.

 * Only 4.35'' tall(good for customer working with tight engine compartment.

 * Dual port.Accurate boost pressure,Ultra durable diagram.

OIL RETURN LINE:

 * Brand new 10AN oil drain/return line kit,made of hight quality stainless steel braided line and T6061 aluminum fitting.

 * Length: 17''. ID: 0.5''.

 * Helps circulate oil from the turbo to the oil pan.

OIL FEED LINE:

 * Brand new oil feed line,made of hight quality stainless steel braided line.Special designed inlet adapter limits oil flow,effectively prevent blown oil seal caused by excessive oil pressure.

 * Length: 36''. ID: 3/8''.

 * Comes with one 1/8 NPT male fitting and one 4AN male fitting.Has restriction build in,offers proper oil feeding to the turbo charger.

FUEL PRESSURE REGULATOR:

 * Brand new fuel pressure regulator. Made of high quality CNC machined aluminum.Includes hardwares and hoses for installing.

 * Manage your fuel system requirements,increase fuel delivery by rasing pressure.

 * Adjustable 0-140 PSI(0-10kg/cm²) for maximum fuel pump capacity.

TURBO BOOST CONTROLLER:

* Brand new turbo boost controller. Made of high quality CNC machined T6061 aluminum with anodized finish.Comes with hardwares for easy installing.

 * Light weight design.Allow you to adjust PSI ratings(1-30PSI)without changing the wastegate springs as well as replacing the wastegate springs.

TURBO TIMER:

 * Brand new pen style turbo timer.Made of high quality.

 * A turbo timer is a device designed to keep an automotive engine running for a pre-specified period of time in order to automatically execute the cool-down period required to prevent premature turbo wear and failure.
 * A turbo timer can be programmed to leave the engine running for a pre-specified period of time even after ther driver has exited and locked the vehicle. after a period of driving when a turbocharger has been working hard, it is important to let the engine run at idle speed for a period of time, allowing the compressor assembly to cool from the lower gas temperatures in both the exhaust and intake tracts. At the same time the lubricating oil from the engine is able to circulate properly so the turbine won't burn the lubricating  oil that would otherwise be trapped within the charger with the turbine rotating at high speed.

 * Instruction is NOT included.Professional installation is highly recommended!

 * Item exactly the same as picture shown.Item color maybe different from picture depending instock,

 * We also carry other turbo chargers&parts,please check out my ebay store.