T04E 5PC TURBO KIT+CAST MANIFOLD+DOWNPIPE 90-01 B16 B18-B21 CIVIC Si EM1/INTEGRA
ITEM SKU: TBK-5PC-TBC-T04E-63+TM-B-C+DP-3TBC-T04E-63 TM-B-C-38 DP-BD-3 WG-38-RD OFL
High Compression/ Boosting T04E Turbocharger
The objective of a turbocharger is to improve the engine's volumetric efficiency by solving one of its cardinal limitations. A naturally aspirated automobile engine uses only the downward stroke of a piston to create an area of low pressure in order to draw air into the cylinder through the intake valves. The pressure in the atmosphere is no more than 1 atm (approximately 14.7 psi), so there ultimately will be a limit to the pressure difference across the intake valves and thus the amount of airflow entering the combustion chamber. Since the turbocharger increases the pressure at the point where air is entering the cylinder, a greater mass of air (oxygen) will be forced in as the inlet manifold pressure increases. The additional air flow makes it possible to maintain the combustion chamber pressure and fuel/air load even at high engine revolution speeds, increasing the power and torque output of the engine.
Specifics and Benefits:
Capable of Boosting Horse Power up to 300+ BHP
High Quality Material, Cast Housing with Durable Steel
| Exhaust (Turbo Manifold) Flange: |
Standard T3/ T4 4-Bolt |
| Exhaust (Downpipe) Flange: |
Standard T3 5-Bolt |
| Intake Inlet/ Outlet: |
3.00"/ 2.00" |
Compressor:
| Trim: |
55 |
| A/R: |
.50 |
| Inducer: |
50.50 |
| Exducer: |
76.00 |
Turbine:
| Trim: |
73 |
| A/R: |
.63 |
| Inducer: |
65.50 |
| Exducer: |
55.90 |
High Performance Cast Iron Exhaust Tubro Manifold
The heart of any turbo system is the manifold and the turbocharger. These form the basis where the rest of the turbo system is built around. There is no match for durability and strength for cast turbo manifolds. Cast manifolds are more durable over long periods of constant heat cycles like daily driving. Cast turbo manifolds offer short runners resulting in quicker spooling for whatever turbocharger is being used. The shorter runners of the cast manifolds take up little space so that it is possible to keep accessory components, such as air conditioning and power steering, of your engine intact.
Specifics and Benefits:
High Performance Turbo Racing Design
Made of High Quality Cast Iron Material for Strength and Durability
Computerized Mandrel-Bended to Maximize Air Flow Smoothness
TIG Welded CNC Machined Flange for Resistance against Cracking and Wearing
Increase Engine Exhaust Output and Efficiency
38mm/ 35mm External Wastegate Port and Flange Included
Standard T3/ T4 Configuration Outlet
Lightweight Stainless Steel Down Pipe
Down Pipes eliminate the stock catalytic converter and reduce exhaust backpressure. By maximizing exhaust flow, this downpipe allows the turbo to spool up and build boost quicker. The result brings out the vehicle’s performance potential by giving it a free high flowing exhaust system.
Specifics and Benefits:
Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends
i.e. Maximizing Smoothest Exhaust Airflow; Instantly Gains 10-15 HPs
Inlet/ Outlet Sizes: 2.50”/ 2.50”
Piping Diameter: 3.00" with Welded Flex Pipe
Direct Bolt-On Installation, O2 Sensor Bung Insertion; Requires NO Modification
Universal 35mm/ 38mm Wastegate with Spring
Specifics and Benefits:
High Strength Cast Steel Body with Steel Head
Comes with 8-PSI Spring Installed
Stainless Steel Braided Oil Feed Line
Specifics and Benefits:
Made of High Quality Stainless Steel Hose
10AN Fittings Anodized Ends
Inner Diameter: 0.25"
Length: 36.00"
1/8 NPT Fittings Natural Polish Finish
100% Brand New
Professional Installation is Highly Recommended (No Instruction Included)
Package Includes:
1 X T04E Turbocharger
1 X Cast Turbo Manifold
1 X External Cast Steel Wastegate WG
1 X B-/D-Series 3” Inlet/ Outlet Downpipe
1 X Braided Oil Feed Line
Hardware, such as Gasket(s) and Bolt(s), if Shown in the Picture Above
Application:
90-01 Acura Integra
99-00 Honda Civic Si
94-97 Honda Del Sol VTEC
(ALL Models Above with an l4 B-Series B16/ B18/ B20/ B21 DOHC Engine ONLY)
Please Check Compatibilities for Years and Models
Modification might be Required for Some Vehicles
* Professional Installation Highly Recommended! No instructions included! *
| DOMESTIC LOWER 48 US STATES: |
$0.00 |
| AK / HI / PR / PO BOX: |
$99.98 |
| CANADA: |
$99.98 |
| REST OF THE WORLD: |
$268.98 |
| SALES TAX: |
CA ONLY |
Shipping Information:
- VERY IMPORTANT: Double check shipping address. We are not responsible for incorrect or undeliverable addresses.
- Please use Shipping & Payments tab on top of page for shipping details for your location.
- Shipping to PR, HI, AK and PO Box addresses will be charged the same as shipping to Canada. GU, VI, SAIPAN will be charged the same as international shipping rate.
- For Canada shipping please select the lowest price. We do not offer expedited shipping.
- US Territories such as GU, VI, SAIPAN will be charged the same as international shipping rate. Transaction will be held until a full shipping amount received.
- Some of the packages cannot be delivered to a PO Box. Customer is responsible to ensure PO Box address given is deliverable by the shipping company. Package will be held until a valid physical address is provided.
- Customer assumes shipping charges incurred in shipping to undeliverable address.
- International buyers are responsible for all customs duties, taxes, and other applicable fees incurred by the country's customs/border regulations. Please contact customs for more information.
- We ship 98% of all orders the same or next business day after payment received/cleared. Please understand that once orders are shipped, we cannot control the transit times thereafter. Most orders will ship via USPS First Class/Priority Mail or FedEx/UPS or the best suitable carrier for the specific size of the product.
- We are not responsible for any changes to address after item has been shipped.
|
Return policy:
- 14 Days money back, please notify us within 14 days after you've received your purchased item.
- All return requests must be submitted through your eBay account.
- You have to obtain a RMA (Return Merchandise Authorization) number from us, and have the RMA number written on the return package.
- Buyers pay for return shipping fee.
- Items to be returned must be in resalable condition.
- All returns are for refund ONLY. No exchange accepted.
- Returns for refund are subject to a 20% restocking fee.
Terms & Conditions:
- For emissions related items, please check with your local jurisdiction for emission specific requirements before purchasing.
- All items do not come with installation instruction unless otherwise specified.
- If item is questionable, please consult your local professional/mechanic before making purchase.
Contact:
- Please use the "Ask A Question" form above to contact us. Please note that we only work from 9am-6pm PST M-F but are OFF on the weekends so messages sent after business hours especially on Friday, will be answered the following Monday.
|
