T04E 11PC TURBO KIT+MANIFOLD+INTERCOOLER 02-06 MIT EVO 8/90-99 ECLIPSE/DSM 4G63
ITEM SKU: TBK-SDD-T04E-63+TM-DSM-S-T3-11TBC-T04E-63 TM-DSM-S-T3 WG-38-SL ITCL-5004 FMICPP-U-25-ST BOV-GS-BL FP-G250 BC-RD WRAP-BK-15M OFL FG-DP-5B
High Compression/ Boosting T04E Turbocharger
The objective of a turbocharger is to improve the engine's volumetric efficiency by solving one of its cardinal limitations. A naturally aspirated automobile engine uses only the downward stroke of a piston to create an area of low pressure in order to draw air into the cylinder through the intake valves. The pressure in the atmosphere is no more than 1 atm (approximately 14.7 psi), so there ultimately will be a limit to the pressure difference across the intake valves and thus the amount of airflow entering the combustion chamber. Since the turbocharger increases the pressure at the point where air is entering the cylinder, a greater mass of air (oxygen) will be forced in as the inlet manifold pressure increases. The additional air flow makes it possible to maintain the combustion chamber pressure and fuel/air load even at high engine revolution speeds, increasing the power and torque output of the engine.
Specifics and Benefits:
Capable of Boosting Horse Power up to 300+ BHP
High Quality Material, Cast Housing with Durable Steel
| Exhaust (Turbo Manifold) Flange: |
Standard T3/ T4 4-Bolt |
| Exhaust (Downpipe) Flange: |
Standard T3 5-Bolt |
| Intake Inlet/ Outlet: |
3.00"/ 2.00" |
Compressor:
| Trim: |
55 |
| A/R: |
.50 |
| Inducer: |
50.50 |
| Exducer: |
76.00 |
Turbine:
| Trim: |
73 |
| A/R: |
.63 |
| Inducer: |
65.50 |
| Exducer: |
55.90 |
High Performance Tubular Exhaust Turbo Manifold
The heart of any Turbo system is the Manifold and the Turbocharger. These form the basis where the rest of the turbo system is built around. Turbo manifolds have only one, but the most critical purpose in turbo systems, and that purpose is to expel exhaust gas into the turbine of a turbocharger as efficiently as possible.
There is no match for power and performance for tubular stainless steel manifolds. Tubular manifolds are made up of runners coming from each cylinder, meeting up at a collector. Tubular manifolds yield a higher efficiency rate, as each runner is generally the same circumference. This tubular manifold furthers the even exhaust flow using "equal length" runners. Equal length tubular manifolds are the most efficient design, which ensures equivalent air flow rate smoothly from each cylinder. This allows for a much smoother flow of exhaust gas to the turbo.
Tubular stainless steel manifolds are chosen over cast manifolds for big power applications. Tubular stainless manifolds feature better and more consistent flow of exhaust gases. Most of the tubular Stainless manifolds also feature the placement of the wastegate flange towards the middle of the collector to allow accurate readings and precise control.
Specifics and Benefits:
High Performance Tubular Turbo Racing Design
Made of High Quality T-304 Polished Stainless Steel Alloy Material for Strength and Durability
Tubular Design with Equal Runners to Ensure Equivalent Exhaust Flow Rate from each Cylinder
Computerized Mandrel-Bended to Maximize Air Flow Smoothness
TIG Welded CNC Machined Flange for Resistance against Cracking and Wearing
Increase Engine Exhaust Output and Efficiency
38mm/ 35mm External Wastegate Port and Flange Included
Standard T3/ T4 Configuration Outlet
Universal 35mm/ 38mm Wastegate with Spring
Wastegates provide a means to control the boost pressure of the turbo charged engine. Wastegates work to bypass exhaust flow from the turbine wheel. Bypassing the exhaust flow reduces the power driving the turbine wheel to match the power required for a given boost level. Similar to the BOV, the Wastegates uses boost pressure and spring force to regulate the flow bypassing the turbine.
Wastegates are bolted to exhaust manifold or header. The advantage of external Wastegates is that the bypassed flow can be reintroduced into the exhaust stream further downstream of the turbine. This tends to improve the turbine’s performance.
Specifics and Benefits:
High Strength Cast Steel Body with Steel Head
Comes with 8-PSI Spring Installed
Universal Lightweight Aluminum Bar and Plate Front-Mount Intercooler
When the charged air enters the end tank, it travels through the tubes of an Intercooler, in which the heat is transferred via fins, where cooler ambient air passes over the tubes. This mechanism further removes heat from air before exiting the opposite end tank and routing to the engine.
Bar and Plate Intercooler functions identically to the Tube and Fin Core, with the exception that, charged air travels through its rectangular shaped passages, which have more surface area; thus, improves cooling effect and power of the charged air. The advantage of this type of intercoolers is that, since the bar and plate core affords up to 35% larger surface area for cooling, a physically smaller intercooler can be used and still retains the cooling efficiency of a larger tube and fin design. This is important for a builder who has a vehicle with a compact opening in the front of it or when there are immovable obstructions present.
Specifics and Benefits:
High Performance Bar and Plate Turbo Racing Design
Made of High Quality T-6061 Aluminum Durable Material
Helps Reducing Engine Inlet Temperature
Allow More Horsepower at the Same Boost Level and Even More Power at the Higher Boost Level
Intercooler Size: 27.25" (L) X 7.00" (H) X 2.75"(W)
Core Size: 21.50" (L) X 7.00" (H) X 2.75"(W)
Inlet/ Outlet : 2.25"/ 2.25”
Inlet/ Outlet Inner Diameter: 2.125"/ 2.125”
Universal Aluminum Intercooler Piping
Specifics and Benefits:
Made of High Quality T-6061 Lightweight Aluminum Piping
2.50" Piping Diameter
Increase 65% Air Flow Comparing with other Standard Piping
Type-S Adjustable Aluminum Billet Blow Off Valve BOV
Specifics and Benefits:
Billet Aluminum Body
8 Discharge Ports That Draw In Surrounding Air and Release a Unique Discharge Sound
40mm, Hard-Anodized Valve for Increased Airflow
Dual Spring System Promoted Response and Allows for High Boost Pressures
Holds Up to 30 PSI Boost Pressure
Aggressive JDM Racing Discharge Sound
Aluminum 2.5” Flange Pipe
Specifics and Benefits:
Made of High Quality T-6061 Aluminum, Lightweight, Heat-Persistent Design
2.5" Pipe Size
30 PSI Turbo Boost Controller
Specifics and Benefits:
CNC Machined Aluminum Body
1-30 PSI Adjustable
Stainless Steel Braided Oil Feed Line
Specifics and Benefits:
Made of High Quality Stainless Steel Hose
10AN Fittings Anodized Ends
Inner Diameter: 0.25"
Length: 36.00"
1/8 NPT Fittings Natural Polish Finish
High Tolerance Manifold Wrap
Specifics and Benefits:
Made of High Quality Synthetic Fabric Material
Tested to Tolerate Extreme Heat and Wearing Corrosions
T3/ T4 5-Bolt Mild Stainless Steel Downpipe Flange
Specifics and Benefits:
Made of High Quality T-304 Mild Steel Durable Material
Construction Prevents Warping Due To High Heat
5-Bolt Design Shape
0.50” Thickness Flange
Fits T3/ T4 2.5" Diameter 5-Bolt Turbo/ Turbocharger Flange
Included for DIY Welding Need
100% Brand New
Professional Installation is Highly Recommended (No Instruction Included)
Package Includes:
1 X T04E Turbocharger
1 X Stainless Steel Turbo Manifold
1 X External Cast Steel Wastegate WG
1 X Type-S Blow Off Valve Kit
1 X Flange Pipe
1 X Adjustable Boost Controller
1 X Manifold Wrap
1 X Braided Oil Feed Line
1 X Lightweight Aluminum Intercooler
1 X Set of Aluminum Piping
8-Piece Piping Set Includes:
2 X 180 Degree U-Pipe
2 X 90 Degree Pipe
2 X 45 Degree Pipe
2 X Straight Pipe
8 X Silicone Hoses
16 X Bolt-Tight Clamps
1 X T3/ T4 5-Bolt Flange
Hardware, such as Gasket(s) and Bolt(s), if Shown in the Picture Above
Application:
84-88 Mitsubishi Cordia 2.0L
84-88 Mitsubishi Tredia 2.0L
89-93 Mitsubishi Galant 2.0L
87-89 Mitsubishi Mighty Max 2.0L
87-89 Dodge Ram 50 2.0L
90-99 Mitsubishi Eclipse 2.0L
02-06 Mitsubishi Lancer Evolution 2.0L
84-91 Dodge Colt Vista 2.0L
90-98 Eagle Talon 2.0L
90-94 Plymouth Laser 2.0L
and More Non-US Market Models:
1983-1998 Mitsubishi Chariot
1993-1998 Mitsubishi Pajero
1994-1998 Mitsubishi RVR
1994-1998 Mitsubishi Delica
2001-2006 Mitsubishi Airtrek
2004-2011 Brilliance BS6
1989-1992 Eagle Vista Wagon
1996-1999 Proton Perdana
(ALL Models Above with a 2.0L I4 SOHC/ Turbocharged DOHC 4G63 Engine ONLY)
Please Check Compatibilities for Exact Years and Models
Modification might be Required for Some Vehicles
* Professional Installation Highly Recommended! No instructions included! *
| DOMESTIC LOWER 48 US STATES: |
$0.00 |
| AK / HI / PR / PO BOX: |
$199.98 |
| CANADA: |
$199.98 |
| REST OF THE WORLD: |
$498.98 |
| SALES TAX: |
CA ONLY |
Shipping Information:
- VERY IMPORTANT: Double check shipping address. We are not responsible for incorrect or undeliverable addresses.
- Please use Shipping & Payments tab on top of page for shipping details for your location.
- Shipping to PR, HI, AK and PO Box addresses will be charged the same as shipping to Canada. GU, VI, SAIPAN will be charged the same as international shipping rate.
- For Canada shipping please select the lowest price. We do not offer expedited shipping.
- US Territories such as GU, VI, SAIPAN will be charged the same as international shipping rate. Transaction will be held until a full shipping amount received.
- Some of the packages cannot be delivered to a PO Box. Customer is responsible to ensure PO Box address given is deliverable by the shipping company. Package will be held until a valid physical address is provided.
- Customer assumes shipping charges incurred in shipping to undeliverable address.
- International buyers are responsible for all customs duties, taxes, and other applicable fees incurred by the country's customs/border regulations. Please contact customs for more information.
- We ship 98% of all orders the same or next business day after payment received/cleared. Please understand that once orders are shipped, we cannot control the transit times thereafter. Most orders will ship via USPS First Class/Priority Mail or FedEx/UPS or the best suitable carrier for the specific size of the product.
- We are not responsible for any changes to address after item has been shipped.
|
Return policy:
- 14 Days money back, please notify us within 14 days after you've received your purchased item.
- All return requests must be submitted through your eBay account.
- You have to obtain a RMA (Return Merchandise Authorization) number from us, and have the RMA number written on the return package.
- Buyers pay for return shipping fee.
- Items to be returned must be in re-sellable condition.
- All returns are for refund ONLY. No exchange accepted.
- Returns for refund are subject to a 20% restocking fee.
Terms & Conditions:
- For emissions related items, please check with your local jurisdiction for emission specific requirements before purchasing.
- All items do not come with installation instruction unless otherwise specified.
- If item is questionable, please consult your local professional/mechanic before making purchase.
Contact:
- Please use the "Ask A Question" form above to contact us. Please note that we only work from 9am-6pm PST M-F but are OFF on the weekends so messages sent after business hours especially on Friday, will be answered the following Monday.
|
  | |
|
