REAR STRUT BARS+CAMBER KITS+RED TRACTION CONTROL+SUPPORT RODS 89-94 NISSAN 240SX
ITEM SKU: CBK-R-S13+TAR+TST-RD+STBRURL-SL
40mm Aluminum Rear Upper Strut + Rear Lower Tie Bar
A strut bar, strut brace, or strut tower brace (STB) is a car suspension accessory usually used in conjunction with MacPherson struts on monocoque or unibody chassis to provide extra stiffness between the strut towers.
This Combo includes:
1 X Rear Upper Strut Bar
1 X Rear Lower Tie Bar
Specifics and Benefits:
Made of CNC Machined Lightweight T-6061 Aluminum Material
Enhances Steering Response and Stability
Increases Stiffness and Reduces Body Rolling during Cornering
40mm Width
Direct Bolt-On Design Improving Ease of Installation
High Strength Rear Camber Kit
When a car’s suspension is upgraded with lowering springs, the result is a lower ride height, a more aggressive look, and better handling due to the lowered center of gravity. While those things are great improvements for the car, the tires suffers from increased wearing and tearing since the tires will slant inwards towards the inside fender. A camber kit will allow the car to remain at the lowered ride height while correcting the angle of the tire closer to the spec it was supposed to be.
Specifics and Benefits:
Improves Rear Suspension Geometry, Predictable Response and even Prevents Premature Tire Wearing
Provides Additional Built-In Positive Caster for Better Handling
High Strength CNC Machined Stainless Steel
Durable Powder Coated Finish
Design for Street, Track or Drift Racing Precise Adjustments with Long Service Life
Direct Bolt-On for OE Replacement
Rear Lower Traction Control Rod/ Arm
Racing Traction Control Arms are forged from High Quality Stainless Steel and are designed as direct replacements with weight reduction over weaker stock components. These extremely strong and lightweight Traction Control Arms help reduce the amount of camber when lowering your vehicle's suspension. As a result, a wider wheel and tire combination can be used with little or no tire rubbing.
Specifics and Benefits:
Adjustable length to Minimize Camber and to Bring Quicker Response
Adjustable Length to tune Front-Caster and to Stabilize Traction during Breaking and Acceleration,
i.e. Improves Handling Ability
Improves Suspension Geometry to Reduce Bump Steer
Light Weight, Less Load to a Vehicle, comparing to OE Stock Products
Made of High Quality Stainless Steel
Designed to Withstand Tough Road Condition, Big Save on Alignment Every Time after Hitting a Bump
Direct Bolt-On Installation or Replacement
Rear Lower Traction Support Rod/ Bar/ Arm
Racing Rear Lower Traction Support Bars are forged from High Quality Stainless Steel and are designed as direct replacements with weight reduction over weaker stock components. With precision adjustment, this extremely strong and lightweight Traction Support Bar provides additional chassis bracing, increasing stiffness and removes unwanted chassis flex during cornering, when lowering your vehicle's suspension. Combining with the replacement of stock robber bushings on the chassis with the Pillow Ball Ends of this Rod, handling and responses would be more predictable and expected. As a result, a wider wheel and tire combination can be used with little or no tire rubbing.
Specifics and Benefits:
Connects to the Rear Lower Control Arm to Provide Additional Chassis Bracing
Increases Stiffness and Removes Unwanted Chassis Flex during Cornering
Minimizes Camber and Brings Quicker Response
Replaces OE Rubber Bushing with Unique Pillow Ball Ends
Light Weight, Less Load to a Vehicle, comparing to OE Stock Products
Made of High Quality, High Tensile Extruded Stainless Steel
Designed to Withstand Tough Road Condition, Big Save on Alignment Every Time after Hitting a Bump
Direct Bolt-On Installation or Replacement
100% Brand New
Professional Installation is Highly Recommended (No Instruction Included)
Package Includes:
1 X Set of 2-Piece Rear Upper Strut + Rear Lower Tie Bars
1 X Set (Right + Left) Rear Camber Kit
1 X Set (Right + Left) Rear Lower Traction Control Rods/ Arms
1 X Rear Lower Traction Support Bar
Necessary Mounting Hardware as Shown in the Picture Above
Application:
89-94 Nissan 240SX S13 Silvia
Note: Spring Rates and Drop Amounts might Vary by Different Vehicles Application and Chassis Loads
Alignment is Highly Recommended After Installation
* Professional Installation Highly Recommended! No instructions included! *
| DOMESTIC LOWER 48 US STATES: |
$0.00 |
| AK / HI / PR / PO BOX: |
$99.98 |
| CANADA: |
$99.98 |
| REST OF THE WORLD: |
$268.98 |
| SALES TAX: |
CA ONLY |
Shipping Information:
- VERY IMPORTANT: Double check shipping address. We are not responsible for incorrect or undeliverable addresses.
- Please use Shipping & Payments tab on top of page for shipping details for your location.
- Shipping to PR, HI, AK and PO Box addresses will be charged the same as shipping to Canada. GU, VI, SAIPAN will be charged the same as international shipping rate.
- For Canada shipping please select the lowest price. We do not offer expedited shipping.
- US Territories such as GU, VI, SAIPAN will be charged the same as international shipping rate. Transaction will be held until a full shipping amount received.
- Some of the packages cannot be delivered to a PO Box. Customer is responsible to ensure PO Box address given is deliverable by the shipping company. Package will be held until a valid physical address is provided.
- Customer assumes shipping charges incurred in shipping to undeliverable address.
- International buyers are responsible for all customs duties, taxes, and other applicable fees incurred by the country's customs/border regulations. Please contact customs for more information.
- We ship 98% of all orders the same or next business day after payment received/cleared. Please understand that once orders are shipped, we cannot control the transit times thereafter. Most orders will ship via USPS First Class/Priority Mail or FedEx/UPS or the best suitable carrier for the specific size of the product.
- We are not responsible for any changes to address after item has been shipped.
|
Return policy:
- 14 Days money back, please notify us within 14 days after you've received your purchased item.
- All return requests must be submitted through your eBay account.
- You have to obtain a RMA (Return Merchandise Authorization) number from us, and have the RMA number written on the return package.
- Buyers pay for return shipping fee.
- Items to be returned must be in resalable condition.
- All returns are for refund ONLY. No exchange accepted.
- Returns for refund are subject to a 20% restocking fee.
Terms & Conditions:
- For emissions related items, please check with your local jurisdiction for emission specific requirements before purchasing.
- All items do not come with installation instruction unless otherwise specified.
- If item is questionable, please consult your local professional/mechanic before making purchase.
Contact:
- Please use the "Ask A Question" form above to contact us. Please note that we only work from 9am-6pm PST M-F but are OFF on the weekends so messages sent after business hours especially on Friday, will be answered the following Monday.
|
  | |
|
