T04E 24P T3 TURBO KIT TURBOCHARGER+MANIFOLD+INTERCOOLER 85-89 MR2/-91 AE86 4A-GE
ITEM SKU: TBK-SDD-T04E-63+TM-4AGE-S-38-24TBC-T04E-63 TM-4AGE-S-38 WG-38-SL ITCL-2004 FMICPP-U-25-ST BOV-GS-BL FP-G250 BC-RD TT-BOX-BK FPR-H-SL VS-RD OC-16R-SL OFRL+L ODL OCT-SL AF-H-3-BL WRAP-BK-15M OFL FG-DP-5B GA3PD-BK+GA-BOOST+OT+WATER-27 ADT-WATEMP-38MM
High Compression/ Boosting T04E Turbocharger
The objective of a turbocharger is to improve the engine's volumetric efficiency by solving one of its cardinal limitations. A naturally aspirated automobile engine uses only the downward stroke of a piston to create an area of low pressure in order to draw air into the cylinder through the intake valves. The pressure in the atmosphere is no more than 1 atm (approximately 14.7 psi), so there ultimately will be a limit to the pressure difference across the intake valves and thus the amount of airflow entering the combustion chamber. Since the turbocharger increases the pressure at the point where air is entering the cylinder, a greater mass of air (oxygen) will be forced in as the inlet manifold pressure increases. The additional air flow makes it possible to maintain the combustion chamber pressure and fuel/air load even at high engine revolution speeds, increasing the power and torque output of the engine.
Specifics and Benefits:
Capable of Boosting Horse Power up to 300+ BHP
High Quality Material, Cast Housing with Durable Steel
| Exhaust (Turbo Manifold) Flange: |
Standard T3/ T4 4-Bolt |
| Exhaust (Downpipe) Flange: |
Standard T3 5-Bolt |
| Intake Inlet/ Outlet: |
3.00"/ 2.00" |
Compressor:
| Trim: |
55 |
| A/R: |
.50 |
| Inducer: |
50.50 |
| Exducer: |
76.00 |
Turbine:
| Trim: |
73 |
| A/R: |
.63 |
| Inducer: |
65.50 |
| Exducer: |
55.90 |
High Performance Tubular Exhaust Turbo Manifold
The heart of any Turbo system is the Manifold and the Turbocharger. These form the basis where the rest of the turbo system is built around. Turbo manifolds have only one, but the most critical purpose in turbo systems, and that purpose is to expel exhaust gas into the turbine of a turbocharger as efficiently as possible.
There is no match for power and performance for tubular stainless steel manifolds. Tubular manifolds are made up of runners coming from each cylinder, meeting up at a collector. Tubular manifolds yield a higher efficiency rate, as each runner is generally the same circumference. This tubular manifold furthers the even exhaust flow using "equal length" runners. Equal length tubular manifolds are the most efficient design, which ensures equivalent air flow rate smoothly from each cylinder. This allows for a much smoother flow of exhaust gas to the turbo.
Tubular stainless steel manifolds are chosen over cast manifolds for big power applications. Tubular stainless manifolds feature better and more consistent flow of exhaust gases. Most of the tubular Stainless manifolds also feature the placement of the wastegate flange towards the middle of the collector to allow accurate readings and precise control.
Specifics and Benefits:
High Performance Tubular Turbo Racing Design
Made of High Quality T-304 Polished Stainless Steel Alloy Material for Strength and Durability
Tubular Design with Equal Runners to Ensure Equivalent Exhaust Flow Rate from each Cylinder
Computerized Mandrel-Bended to Maximize Air Flow Smoothness
TIG Welded CNC Machined Flange for Resistance against Cracking and Wearing
Increase Engine Exhaust Output and Efficiency
38mm/ 35mm External Wastegate Port and Flange Included
Standard T3/ T03 Configuration Outlet
Universal 35mm/ 38mm Wastegate with Spring
Wastegates provide a means to control the boost pressure of the turbo charged engine. Wastegates work to bypass exhaust flow from the turbine wheel. Bypassing the exhaust flow reduces the power driving the turbine wheel to match the power required for a given boost level. Similar to the BOV, the Wastegates uses boost pressure and spring force to regulate the flow bypassing the turbine.
Wastegates are bolted to exhaust manifold or header. The advantage of external Wastegates is that the bypassed flow can be reintroduced into the exhaust stream further downstream of the turbine. This tends to improve the turbine’s performance.
Specifics and Benefits:
High Strength Cast Steel Body with Steel Head
Comes with 8-PSI Spring Installed
Universal Lightweight Aluminum Bar and Plate Front-Mount Intercooler
When the charged air enters the end tank, it travels through the tubes of an Intercooler, in which the heat is transferred via fins, where cooler ambient air passes over the tubes. This mechanism further removes heat from air before exiting the opposite end tank and routing to the engine.
Bar and Plate Intercooler functions identically to the Tube and Fin Core, with the exception that, charged air travels through its rectangular shaped passages, which have more surface area; thus, improves cooling effect and power of the charged air. The advantage of this type of intercoolers is that, since the bar and plate core affords up to 35% larger surface area for cooling, a physically smaller intercooler can be used and still retains the cooling efficiency of a larger tube and fin design. This is important for a builder who has a vehicle with a compact opening in the front of it or when there are immovable obstructions present.
Specifics and Benefits:
High Performance Bar and Plate Turbo Racing Design
Made of High Quality T-6061 Aluminum Durable Material
Helps Reducing Engine Inlet Temperature
Allow More Horsepower at the Same Boost Level and Even More Power at the Higher Boost Level
Intercooler Size: (24.50" Including Piping) 22.25" (L) X 10.75" (H) X 2.50"(W)
Core Size: 17.75" (L) X 10.50" (H) X 2.50"(W)
Inlet/ Outlet : 2.00"/ 2.00”
Inlet/ Outlet Inner Diameter: 1.75"/ 1.75”
Universal Aluminum Intercooler Piping
Specifics and Benefits:
Made of High Quality T-6061 Lightweight Aluminum Piping
2.50" Piping Diameter
Increase 65% Air Flow Comparing with other Standard Piping
Universal 35mm/ 38mm Wastegate with Spring
Specifics and Benefits:
High Strength Cast Steel Body with Steel Head
Comes with 8-PSI Spring Installed
Type-S Adjustable Aluminum Billet Blow Off Valve BOV
Specifics and Benefits:
Billet Aluminum Body
8 Discharge Ports That Draw In Surrounding Air and Release a Unique Discharge Sound
40mm, Hard-Anodized Valve for Increased Airflow
Dual Spring System Promoted Response and Allows for High Boost Pressures
Holds Up to 30 PSI Boost Pressure
Aggressive JDM Racing Discharge Sound
Aluminum 2.5” Flange Pipe
Specifics and Benefits:
Made of High Quality T-6061 Aluminum, Lightweight, Heat-Persistent Design
2.5" Pipe Size
30 PSI Turbo Boost Controller
Specifics and Benefits:
CNC Machined Aluminum Body
1-30 PSI Adjustable
Stainless Steel Braided Oil Feed Line
Specifics and Benefits:
Made of High Quality Stainless Steel Hose
10AN Fittings Anodized Ends
Inner Diameter: 0.25"
Length: 36.00"
1/8 NPT Fittings Natural Polish Finish
Universal Box Style Programmable LED Turbo Timer
Specifics and Benefits:
Allows the Vehicle to Idle the Engine, for the Timed Period, with the Ignition Key Removed
Auto Mode - Precise Calculation of Cool Down Period to Ensure Proper Cool Down of Turbo-Charged Engine.
Digital Display - Allowing Clear Vision during Day & Night Time.
Universal Adjustable Fuel Pressure Regulator
Specifics and Benefits:
Adjustable from (1-15) psi to 140 Maximum Fuel Pump Capacity
Improves Fuel Delivery Efficiency and Prevents Fuel Starvation for More Consistent Boost and Fuel Flow
Designed to Maintain the Optimal Fuel Rail Pressure for High Performance/ Turbocharged Engine
Delivers Vehicles’ Highest Performance, with Long Life and Highly Reliable Operation
Comes with Hose, Bolts, Connectors and Installation Kits
Universal Voltage Stabilizer/ Regulator
Specifics and Benefits:
Improves Ignition Flow and Strengthens Starting Power
Stabilizes Voltage, Improves Engine Performance
Specially Designed with High Water and Heat Resistance
Universal 16-Row 10 AN Oil Cooler
Specifics and Benefits:
Usable to Cool Down Engine Oil, Transmission, and Rear-Differentials
Made with High Quality T-6061 Aluminum
Potentially Reduces Oil Temperature up to 50°F
Overall Size: 13.00" x 6.00" x 2.00"
Core Size: 9.25" x 5.00" x 2.00"
Inlet / Outlet Size: 10 AN
Oil Filter Relocation and Oil Line Kits
Specifics and Benefits:
Made of High Quality Lightweight Aluminum with CNC Laser Cut
Increases Engine Oil Capacity Available; thus, Enhances Oil Lubrication and Protection of Engines
Oil Filter Relocation for Easier Access and Oil Change; a Must for Hard-To-Reach Oil Filters
10-AN Male Fitting and 0.875” x 12.125” Bolt Pattern
Billet Aluminum Oil Catch Tank
Specifics and Benefits:
Clear Tube Indicator for Easy Visual of Checking if the Tank is Full
Ensure Better Mileage, Better Performance and Preserve Engine Life
Catch Oil and Sludge to Save the Life of the Engine
Universal 3-Port Gauge/ Meter Dash Pod
Specifics and Benefits:
Dimensions: 9.25” (Length) X 4.50” (Width) X 3.00” (Height)
Flatten Bottom Surface for Easy Direct Hood Mount or Stick Mount
2.0625” (Diamter) X 2.50" (Depth) Pods
Universal Smoke-Tinted Turbo Boost + Oil Temperature + Water Temperature Gauges
Specifics and Benefits:
Enchanting 7-Color LED Display, to Match Interior Lightings at its Best
Stylish Smoke-Tinted Screens
2” Gauge Diameter for 12V Power Source
Universal Aluminum Radiator Water Temperature Gauge Adaptor
Specifics and Benefits:
Made of High Quality Light Weight Aluminum Material
Port Diameter: 38mm/ 1.50"
Overall Dimensions: 2.75" (Length) X 2.25" (Height)
Sensor Port Thread Pitch and Diameter: 1/8 NPT/ 6AN
3.00” Universal Mushroom Type Air Filter
Specifics and Benefits:
Made of Reinforced Material and Covered with Chromed Finish for Lightweight and Durability
3.00” Filter Inlet, 3.00" Inner Diameter Pipe
Performance: Improves Up to 95% Filtration Efficiency
Micro High Density Foam Gauze Type Filter Material, Washable with Water or Soap, and Reusable
Universal Braided Stainless Steel 10AN Oil Drain Line
Specifics and Benefits:
Stainless Steel Braided Hose 1/2" Inner Diameter 20.00" Length
10AN Fittings Anodized Finish
Weldable 10AN Oil Pan Fitting Included
High Tolerance Manifold Wrap
Specifics and Benefits:
Made of High Quality Synthetic Fabric Material
Tested to Tolerate Extreme Heat and Wearing Corrosions
Dimensions: 2.00" (Width) X 1/16" (Thick) X 600"/ 50' (Length)
T3/ T4 5-Bolt Mild Stainless Steel Downpipe Flange
Specifics and Benefits:
Made of High Quality T-304 Mild Steel Durable Material
Construction Prevents Warping Due To High Heat
5-Bolt Design Shape
0.50” Thickness Flange
Fits T3/ T4 2.5" Diameter 5-Bolt Turbo/ Turbocharger Flange
Included for DIY Welding Need
100% Brand New
Professional Installation is Highly Recommended (No Instruction Included)
Package Includes:
1 X T04E Turbocharger
1 X Stainless Steel Turbo Manifold
1 X External Cast Steel Wastegate WG
1 X Type-S Blow Off Valve Kit
1 X Flange Pipe
1 X Adjustable Boost Controller
1 X Programmable LED Turbo Timer
1 X Adjustable Fuel Pressure Regulator
1 X Universal Voltage Stabilizer
1 X 16-Row 10AN Aluminum Oil Cooler
1 X Oil Filter Relocation Kit
3 X Oil Lines
1 X Aluminum Oil Catch Tank
1 X Universal Turbo Boost Gauge
1 X Universal Oil Temp. Gauge
1 X Universal Water Temp. Gauge
1 X Universal 52mm Gauge/ Meter Pods
1 X Aluminum Radiator Water Temperature Gauge Adaptor
1 X Mushroom Type Air Filter
1 X Oil Drain Line Kit
1 X Manifold Wrap
1 X Braided Oil Feed Line
1 X Lightweight Aluminum Intercooler
1 X Set of Aluminum Piping
8-Piece Piping Set Includes:
2 X 180 Degree U-Pipe
2 X 90 Degree Pipe
2 X 45 Degree Pipe
2 X Straight Pipe
8 X Silicone Hoses
16 X Bolt-Tight Clamps
1 X T3/ T4 5-Bolt Flange
Hardware, such as Gasket(s) and Bolt(s), if Shown in the Picture Above
Application:
85-91 Toyota Corolla AE86 (with Wide Valve Angles)
(GTS/ FX16 Models ONLY)
85-89 Toyota MR2
(GT Models ONLY)
88 Chevrolet Nova
(Twin Cam Models ONLY)
90-92 Geo Prizm
(GSi Models ONLY)
and More Non-US Market Models:
1983 June - 1985 AA63 Carina (Japanese Market)
1985 - 1988 AT160 Carina (Japanese Market)
1988 - 1992 AT171 Carina (Japanese Market)
1983 Aug - 1985 AA63 Celica
1985 - 1989 AT160 Celica
1983 Oct - 1985 AT141 Corona (Japanese Market)
1985 - 1988 AT160 Corona (Japanese Market)
1984 June - 1989 AW11 MR2
1984 Oct - 1987 AE82 Sprinter (Japanese Market)
1983 May - 1987 AE86 Sprinter Trueno (Japanese Market)
1987 - 1992 AE92 Sprinter 1987–1992 (Japanese Market)
1986 - 1993 AE86/AE92 Corolla GLi Twincam/Conquest RSi (South African Market)
(ALL Models Above with a 4A-GE I4 1.6L DOHC Engine ONLY)
Please Check Compatibilities for Exact Years and Models
Modification might be Required for Some Vehicles
* Professional Installation Highly Recommended! No instructions included! *
| DOMESTIC LOWER 48 US STATES: |
$0.00 |
| AK / HI / PR / PO BOX: |
$299.98 |
| CANADA: |
$299.98 |
| REST OF THE WORLD: |
$798.98 |
| SALES TAX: |
CA ONLY |
Shipping Information:
- VERY IMPORTANT: Double check shipping address. We are not responsible for incorrect or undeliverable addresses.
- Please use Shipping & Payments tab on top of page for shipping details for your location.
- Shipping to PR, HI, AK and PO Box addresses will be charged the same as shipping to Canada. GU, VI, SAIPAN will be charged the same as international shipping rate.
- For Canada shipping please select the lowest price. We do not offer expedited shipping.
- US Territories such as GU, VI, SAIPAN will be charged the same as international shipping rate. Transaction will be held until a full shipping amount received.
- Some of the packages cannot be delivered to a PO Box. Customer is responsible to ensure PO Box address given is deliverable by the shipping company. Package will be held until a valid physical address is provided.
- Customer assumes shipping charges incurred in shipping to undeliverable address.
- International buyers are responsible for all customs duties, taxes, and other applicable fees incurred by the country's customs/border regulations. Please contact customs for more information.
- We ship 98% of all orders the same or next business day after payment received/cleared. Please understand that once orders are shipped, we cannot control the transit times thereafter. Most orders will ship via USPS First Class/Priority Mail or FedEx/UPS or the best suitable carrier for the specific size of the product.
- We are not responsible for any changes to address after item has been shipped.
|
Return policy:
- 14 Days money back, please notify us within 14 days after you've received your purchased item.
- All return requests must be submitted through your eBay account.
- You have to obtain a RMA (Return Merchandise Authorization) number from us, and have the RMA number written on the return package.
- Buyers pay for return shipping fee.
- Items to be returned must be in re-sellable condition.
- All returns are for refund ONLY. No exchange accepted.
- Returns for refund are subject to a 20% restocking fee.
Terms & Conditions:
- For emissions related items, please check with your local jurisdiction for emission specific requirements before purchasing.
- All items do not come with installation instruction unless otherwise specified.
- If item is questionable, please consult your local professional/mechanic before making purchase.
Contact:
- Please use the "Ask A Question" form above to contact us. Please note that we only work from 9am-6pm PST M-F but are OFF on the weekends so messages sent after business hours especially on Friday, will be answered the following Monday.
|
  | |
|
