shop
  Rear View Camera Night Vision Waterproof
 
    


thumb  thumb 

This high-quality rear view camera is designed and produced specifically for the purpose of being attached to the rear of a vehicle to aid in backing up.

This is a night-vision camera which uses a series of infrared lights for backing in the dark, when the positioning or the intensity of the vehicle's white reverse lights are insufficient for this purpose.

This Rear View Camera features water-proof structure which provides good performance. It is the perfect solution to get rid of poor visibility on your car, boat, trailer, camper, truck, or any vehicle that has no rear-view mirror or poor rear vision.

   

Night Vision! Waterproof!


 
  Why Buy from TRUSTiGO?
 




 
  Brand Name: TRUSTiGO
 
 

Features

  • Sensor brand name: Sharp
  • High-definition and wide viewing angles
  • High quality and durable material
  • Real time rear view while back up
  • Easy to install
  • The illumination is super low
  • With good waterproof and night vision function
  • Elegant and contemporary design

Specifications
System: NTSC/PAL
Effective pixels: PAL - 510 x 582; NTSC -656 x 492
Shutter speed
: 1/50 pal, 1/60 ntsc 1/10, 000 seconds
Mini illumination
: 0.1 Lux/F
Video output
: RCA connector, 1.0VP-P, 75Ω
Power consumption
: 110mA, max. 300mA with IR on
Power supply
: DC12V+/- 10%
Operating temperature
: -20℃ - 50℃, RH 95%
Storage temperature
: -30℃ - 50℃, RH 95%

Horizontal Sync Freq: NTSC 15734kHz / PAL 15625kHz
Vertical Sync Freq
: NTSC 60Hz / PAL 50Hz
Resolution
: 420TV Lines
Lens
: F2.5mm
Waterproof
: IP66
S/N radio
: >48dB
Horizontal angel
: 120 degree
Sync System
: Internal
AGC/BLC
: Auto

What's in the box:

  • 1 x Low Illumination Color Car Rear View Camera
  • 1 x Video Cable (5 meters long)
  • 1 x Installation Accessories

How to wire up rear view camera

  • Attach the camera's power wire (red wire) to the backup-light power wire on your car. This will give the rear-view camera power when you put the car in reverse;
  • Attach the camera’s black wire to ground;
  • Route the camera's output wire to your monitor or in-dash radio's video input(RCA connector); in this way, rear camera's video signal will be sent to the monitor or in-dash radio;
  • Connect ‘Reverse’ or 'Back' wire on your monitor or in-dash radio to the backup-light power wire. This will inform the monitor or the radio to switch to rear view when the car is reversing.