The Most COMPLETE TURBO KIT For VR6

T3/T4 Turbo Charger:

 .50 A/R Compressor, .63A/R Turbine
 450HP+ Capable
 T3 Flange to Manifold
 5 Bolt Downpipe Flange
 Oil Lube/Cool
 3" Inlet Diameter & 2" Outlet Diameter

CAST IRON TURBO MANIFOLD FOR VR6

Made of High Grade Steel!
 All nuts and bolts included
 Direct Bolt on

BAR AND PLATE 27X5.5X2.5 FRONT MOUNT INTERCOOLER
Bar and plate intercooler cores function identically to the tube and fin core, with the exception that charge air travels through rectangular shaped passages that have more surface area, thus improving cooling of the air charge. The advantage to using this type of intercooler is that because the bar and plate core design affords up to 35% larger surface area for cooling, a physically smaller intercooler can be used and still retain the cooling efficiency of a larger tube and fin design. This is important for a builder who has a vehicle with a small opening in the front of it or where there are immovable obstructions present. However there is only one disadvantage to the bar and plate design. The bar and plate intercooler is heavier due to the larger surface area and denser fin design.  The benefits of more overall power will quickly dissolve the weight issue in most tuner minds. 

This intercooler is made of high quality polished finish aluminum.
High Performance Better Cooling
Bar and Plate
Over All Size: 27" X 5.5" X 2.25".
Core Size: 21" X 5.5" X 2.25".
Professional Installation is highly recommended!

38MM WASTEGATE
Wastegates provide a means to control the boost pressure of the turbo charged engine. Wastegates work to bypass exhaust flow from the turbine wheel. Bypassing the exhaust flow reduces the power driving the turbine wheel to match the power required for a given boost level. Similar to the BOV, the Wastegates uses boost pressure and spring force to regulate the flow bypassing the turbine. Wastegates are bolted to exhaust manifold or header. The advantage of external Wastegates is that the bypassed flow can be reintroduced into the

exhaust stream further downstream of the turbine. This tends to improve the turbine’s performance.

 

UNIVERSAL 2.5INCH INTERCOOLER COOLER PIPING KIT
100% Brand New 2.5 Intercooler Piping Kit. High Quality Made of 6061 Aluminum chrome coated finished Lightweight
Design. Great for Turbo DIY builder.Increase 65% air flow when compare with other piping! Might Modify to Fit in Your
Car, No Instruction Included, Professionall Installation Is Highly Recommended
Universal Fit all Turbo Projects!
This kit comes with 8 pc aluminum piping, and comes with 16 clamps 8 silicone hose

OIL DRAIN AND FEED LINE
100% Brand New. Never been Tried or Installed.
Made of High Quality Mild Steel Durable Material
CNC Machined Performance Lightwight Design
Improves Cycle Cooling System for All Engine Type
Feed Line: Length 36mm 1/8 Adapter NPT Male Fitting
Drain Line: 39.5mm Hose Size: 7/8"

TURBO BOOST CONTROLLER
100% brand new made with hard anodized aluminum, Manual boost control from 0-30 PSI, Adjust to increase turbo pressure, come with necessary accessories

TURBO BLOW OFF VALVE AND FLANGE PIPE ADAPTER
External Wastegare Made of High Stainless Steel Body and Aluminum Cover
The BOV Should be Installed Between the Compressor Discharge and the Throttle Body. Preferalby Downstream of the Intercoler(If Equipped)

FUEL PRESSURE REGULATOR
CNC MACHINED LIGHT WIGHT BILLET ALUMINUM
EXACTLY the same as the picture below
EASY TO INSTALLATION, DIRECT BOLT ON
PROFESSIONAL INSTALLER IS HIGHLY RECOMMENDED.
JDM Adjustable Fuel Pressure Regulator w/ 1:1 Ratio
Fuel Pressure regulator can deliever high performance, with long life and high reliable operation
Adjustable from (1-100) psi to maximum fuel pump capacity

OIL CATCH TANK
Installed connecting the PCV Valve or pressure release hose to the intake pipe, this unit captures and stores excess oil coming from valve cover. This results in clean air recirculating back into the intake unlike the factory system which puts the release tube directly back into the engine. Results a decrease in valve cover pressure prolonging engine life and increasing performance.Also a must in any competition car due to regulations concerning oil on the track.

OIL LINE+OIL COOLER
This 19 ROWS oilcooler is made of high quality polished finish aluminum.
High Performance Better Cooling
Powder coated for durability and oxidation protection
Useable to cool engine oil, transmission, or rear-differentials.
Professional Installation is highly recommended!
 
Oil Filter Relocation Kit:
100% Brand new never been used or tried.
Made out of high quality aluminum with CNC laser cut
Oil Filter relocation for easy access, a must for hard-get oil filter.
3/4”-16 (An-8) thread fitting and 7/8” x 12 1/8 bolt pattern

SLIM RADIATOR FAN

The Slim Radiator Fan has an ultra slim design so the fan can be installed flush against your radiator. Thanks to the Universal Fan Mounting Kit, the fan can be mounted to any radiator. It can also be mounted in the most convenient position to allow for more leniencies for other aftermarket parts.
• Can be used in a wide variety of other applications as well, including A/C condenser cooling, mounting on an intercooler to prevent heat soak during drag racing events, or cooling the radiator in a water-to-air intercooler setup.
• Unlike some of the universal fans out there, our fans include the mounting feet and ALSO come with through-radiator mounting kits
• Unlike some of the universal fans out there, our fans are only 2.5" deep at the deepest point, making them ideal for installations in cramped areas.

TURBO TIMER
A TURBO TIMER IS AN ELECTRONIC DEVICE DESIGNED TO KEEP AN AUTOMOTIVE ENGINE RUNNING FOR A PRE-SPECIFIED PERIOD OF TIME IN ORDER TO AUTOMATICALLY EXECUTE THE COOL-DOWN PERIOD REQUIRED TO PREVENT PREMATURE TURBO WEAR AND FAILURE. A TURBO TIMER CAN BE PROGRAMMED TO LEAVE THE ENGINE RUNNING FOR A PRE-SPECIFIED PERIOD OF TIME EVEN AFTER THER DRIVER HAS EXITED AND LOCKED THE VEHICLE. AFTER A PERIOD OF DRIVING WHEN A TURBOCHARGER HAS BEEN WORKING HARD, IT IS IMPORTANT TO LET THE ENGINE RUN AT IDLE SPEED FOR A PERIOD OF TIME, ALLOWING THE COMPRESSOR ASSEMBLY TO COOL FROM THE LOWER GAS TEMPERATURES IN BOTH THE EXHAUST AND INTAKE TRACTS. AT THE SAME TIME THE LUBRICATING OIL FROM THE ENGINE IS ABLE TO CIRCULATE PROPERLY SO THE TURBINE WON’T BURN THE LUBRICATING  OIL THAT WOULD OTHERWISE BE TRAPPED WITHIN THE CHARGER WITH THE TURBINE ROTATING AT HIGH SPEED.

16ITEMS MOST COMPELET TURBOCHARGER KIT

Additional piping might be required and/or modification might be needed
 
Comes w/ Extra Parts! Professional Installation is Highly Recommended (No Instruction Included)!!

 

- We accept PayPal payments. (e-check takes 3-7 business days to be processed. We will not ship until it is cleared)

Payment Options Overview:

- Domestic Shipping rates apply to all 48 contiguous states.
- PR, HI, AK and PO Box addresses shipping rates are the same as CANADA shipping.
- US Territories and Military such as GU, VI, SAIPAN, APO/FPO will be charegd the same as international shipping rate. Transaction will be held until a full shipping amount received.
- For Canada shipping please select the lowest price. We do not offer expedited shipping.
- Some of the packages cannot be delivered to a PO Box. Customer is responsible to ensure PO Box address given is deliverable by the shipping company. Package will be held until a valid physical address is provided.
- Items will be shipped 24 hours of payment verification.
- All international orders may be subject to their custom fees or brokerage fees or duty tax which we do not pay.
- All buyers must pay for their own customs fees or brokerage fees or duty tax.
- These fees vary due to price of item and government rate. Please contact your government website or shipping company to calculate fees.
- We are not responsible for any changed of address after item has been shipped.

IMPORTANT NOTICE:
We ship all our items either via UPS/FEDEX or USPS. If there is no specific request prior to purchasing, we will ship either method.

Very Important Shipping Policy:
We only could ship to the address that's stated on your PayPal account as the shipping address unless the correct address was stated on the PayPal notes section. E-mailing us after you have made payment does not count so please update your shipping address on PayPal before making a payment. Thanks.

- 14 Days money back, please notify us within 14 days after you've received your purchased item.
- All return requests must be submitted through your Ebay account.
- You have to obtain a RMA (Return Merchandise Authorization) number from us, and have the RMA number written on the return package.
- Buyers pay for return shipping fee.
- Items to be returned must be in resalable condition.
- All returns are for refund ONLY. No exchange accepted.
- Returns for refund are subject to a 20% restocking fee.

Note: Most items DO NOT come with instruction of Installation otherwise stated above, the buyer are responsible of the installation. If item is questionable, please consult your local professional/mechanic before making purchase.

Got any questions about this listing or the product that you've already purchased? Please feel free to contact us by using the ebay link "Ask seller a question" above, and also please notice that no emails will be replied during weekend and holidays.

DNA Motoring Business Hours: Monday - Friday, 10 AM to 5 PM (Pacific Time).

DNA Motoring Contact Phone: 1-626-965-8898

**For emissions related items, please check your local jurisdiction for emission specific requirements before purchasing.**