12V 0-100V/50A Digital DC Voltage Current Measurement Red LED Dual Display +50A/75mV Shunt #100043

12V 0-100V/50A Digital DC Voltage Current Measurement Red LED Dual Display +50A/75mV Shunt #100043
12V 0-100V/50A Digital DC Voltage Current Measurement Red LED Dual Display +50A/75mV Shunt #100043
12V 0-100V/50A Digital DC Voltage Current Measurement Red LED Dual Display +50A/75mV Shunt #100043
12V 0-100V/50A Digital DC Voltage Current Measurement Red LED Dual Display +50A/75mV Shunt #100043
12V 0-100V/50A Digital DC Voltage Current Measurement Red LED Dual Display +50A/75mV Shunt #100043
12V 0-100V/50A Digital DC Voltage Current Measurement Red LED Dual Display +50A/75mV Shunt #100043
12V 0-100V/50A Digital DC Voltage Current Measurement Red LED Dual Display +50A/75mV Shunt #100043
12V 0-100V/50A Digital DC Voltage Current Measurement Red LED Dual Display +50A/75mV Shunt #100043
12V 0-100V/50A Digital DC Voltage Current Measurement Red LED Dual Display +50A/75mV Shunt #100043
Product Description

Features:
  • Operating voltage:DC 4.5 ~ 30V
  • Measure voltage: DC 0 ~ 100V
  • Minimum resolution(V): 0.1V
  • Measure current :DC 50A (require external shunt)
  • Minimum resolution(A): 0.1A
  • Operating Current: <20mA
  • Display: three 0.28" LED digital tube
  • Display color: Red (dual display)
  • Dimensions: 48 x 29 x 21mm
  • Mounting cutout: 45.5 x 26.5mm
  • Refresh rate: about 500mS / times
  • Measure accuracy: 1% (± 1 digit)
  • Operating temperature: -10 to 65° c
  • Operating Humidity: 10 to 80% (non-condensing)
  • Working pressure: 80 to 106 kPa

Wiring:
  • Black line (thin): vacant or buck circuit (module) negative
  • Red line (thin): power supply+
  • Black line (thick): COM, common measuring
  • Red line (thick): PW+, measuring terminal voltage input positive
  • Yellow line (thick): IN+, current input+
  • (Please refer to the wiring diagrams for more details)

Notice:
  • The voltage between the thin red and thin black lines must be within DC 4.5-30V
  • The ammeter can only be connected to the negative of the device under test
  • Exceeds 5A, long-term full load working continuously, it is recommended that the measurement side of the leads are directly soldered to the socket
  • When the black thin line vacant, it is better to use insulating tape around the exposed part of the wire, to prevent short circuits
  • If just be used as a voltmeter, it is recommended that the yellow line and the black line were connected together, to prevent the ammeter digital flashing

Package include:
  • 1x Digital Volt Ampere Meter
  • 1x50A/75mV Current Shunt
 
Payment Method
  • We accept only Paypal for both domestic and international.
  • We will ship to the shown address on you PAYPAL Payment notice,Please confirm your shipping address in the PayPal Account.
  • If buyer want to delay the payment because of financial problem, please contact me by the ebay message within 3 days.
Shipping Detail
  • Ship by Post Air-mail within 3 working days after full payment is received.
  • The shipment usually takes 15-45 business days to Worldwide.
  • We also provide international Expressed delivery such as EMS, DHL and UPS,extra shipping fees is needed.
  • The shipping time may vary, depends on receiver's location.
Feedback Policy
We will leave positive feedback to buyer as soon as buyer pays for the item. Leaving Negative feedback or Netural Feedback is never a good way to resolve problem .We hightly appreciate that you can contact with us before you leaving Negative feedback or Neutral feedback .We will offer help to resolve your problems as fast as possible.
Customer Service Work Time
If you have any questions,Please contact with us via eBay message or our customer service e-mail . please be advised that e-mails will be replied by our customer services officers Mon. - Fri. 11:00 - 20:00 and Saturdays 11:00 – 15:00(Excluding Weekends and Public Holidays)
You may expect to receive a response to your inquiry within 24 hours. (Excluding Weekends and Public Holidays)
Engineered for professional eBay sellers!