Item Description

This page features a pair (2 pieces) 12" fexible and weatherproof 15 SMD LED strip lights.

Our LED strips hook up to your car in one easy step, bringing you all the convenience of weatherproof, inexpensive, high tech auto accessory ingenuity.

Very bright and very cool, these strips give you total lighting flexibility, put next to no drain on your car battery, and no matter whether you use them in hard rain or the driest night on record, they won't fail you. 

• Brand New 12" flexible and weatherproof 15SMD LED strip lights.
• Sold in pair, price is for 2pcs ultra bright lights.
• These LED strip lights are great for lighting up your car interior/exterior.
• Our SMD LED is very high quality and emmits super bright light output.
• The back of each LED strip has 3M self-adhesive tape.
• The flexible Strip can be bent to any shape to fit any car.
• It can be cut every 3 LED lights off for your custom fit.
• Low temperature, low power consumption & lasts up to 50k hours.
• Immediate response and vibration resistant.
• Simple Installation, Just connect to any 12V power source.
 

Installation is simple, just connect the two wires (+ and -) to your 12v power source. Our LED strips put out a minimum amount of heat, so there's no risk of fire, and they'll also fit in a variety of places: 

• Around the front grille
• Under foot-wells
• On wheel wells
• In the trunk
• Under the hood
• On headlights
• Along the dash
• Wherever the heck you want them to go!

The only limit is your imagination.

FAQ

Can the LED strips be cut or trimmed? Yes! You can easily cut the LED strips. Use a sharp utility knife. The LEDs are wired in groups of 3, so you should cut between sets of 3 LEDs. Note: Some of the shorter lengths can't be cut because of a critical power wire inside. Before you cut, just make sure you won't be cutting a power wire, otherwise your LED strip could be damaged. Can the cut section of the strip be re-used? While it is physically possible, it is not a simple procedure and not worth the effort. For practical purposes, you are better off discarding the cut portion. Once cut, is the strip still waterproof? If you cut it right, it will maintain a degree of "weather resistance". But to make a cut strip fully waterproof again, we recommend you add some silicone sealant to the cut end. What is the best way to mount them? Cable ties, also known as zip ties work for many installations. We also include a surprisingly strong 3M double sided adhesive mounting tape. How should they be mounted in the wheel well? Before removing the wheel, you should hold the strip in a few locations behind the wheel until you find a suitable location. Play around with some different options. We find it works best if they are mounted on or behind suspension components. Do the LED strips require resistors? No. The LED strips do not require any resistors. They are ready to work on any 12 volt power source. Which wire is power and which is ground? The red wire is 12v +, and the black wire is 12v - (ground). If you accidentally reverse them, nothing bad will happen. Can I use these for underbody glow under the car? Yes! The result will be fantastic. You may try our longer strips for a wheel-to-wheel gapless glow.

Terms and Conditions

Shipping

• Most items will be shipped within 1 business day after payment is received.
• We don't offer local pick-up, all other area/country not in shipping area please ask before bid.
  
  

Payment