Testors Header v1

Part# MRT 150G
Dinging Hammer with a Hickory Wood Handle

For fender and high-crowned panel dinging or bumping. Both high and low-crown faces for “on or off dolly” work.

Faces, 1-1⁄4″ and 1-9⁄16″. Round heads, 6″ overall. Weight 1.04 lbs.

Testors Header v1 Untitled Document

Type	Description	Wood Handles	Fiberglass Handles
Body and Pick Hammers Only Martin Hammers have the time tested good balance, and proper weight and clearances to speed and simplify repairs. Martin Hammers are forged from special alloy steel. Handles are of tough second growth Hickory and fiberglass shaft with cushion grips. Martin Fiberglass Handles offer greater strength, longer life and minimal shock. Only Martin provides this added warranty: If a hammer should loosen at any time, return it for handle replacement or a new hammer.
DINGING HAMMER	For fender and high-crowned panel dinging or bumping. Both high and low-crown faces for “on or off dolly” work. Faces, 1-1⁄4″ and 1-9⁄16″. Round heads, 6″ overall. Weight 1.04 lbs.	150G	150FG
DINGING HAMMER	For light dinging and long reach. Square face permits dinging close to molding or beading. Faces, 1-1⁄4″ round, 1-1⁄16″ square head 6″ overall. Weight .85 lbs.	151G	—
CROSS CHISEL HAMMER	Excellent for finishing. Cross peen used for working in sharp corners around moldings and for caulking. Round face — 1-9⁄16″ diameter. Chisel — 3″ long. Weight .87 lbs.	153G	153FG
CURVED CROSS CHISEL HAMMER	Excellent for finishing. Cross peen used for working in sharp corners around moldings and for caulking. Well balanced curved chisel for work in close places. Round face — 1-9⁄16″ diameter. Chisel — 3″ long. Weight .85 lbs.	153GB	153FGB
CROSS CHISEL SHRINKING HAMMER	Cross grooved. Extra wide faces are cross grooved and used for shrinkage on large surfaces — chisel end used on sharp corners. Flat round face — 1-9⁄16″ diameter. Chisel — 3″ long. Weight .87 lbs.	153S	—
BENT VERTICAL CHISEL HAMMER	Excellent for finishing. Vertical chisel is bent for working in sharp corners, around moldings and for caulking. Round face — 1-1⁄2″ diameter. 5⁄8″ Chisel — 5-1⁄2″ long. Weight .85 lbs.	154G	154FG
FENDER BUMPER	For bumping where hand and dolly cannot reach. Ample clearance for obstructions. Also used as a caulking iron. Length of head, 8-3⁄4″. Weight 2.8 lbs.	155G	155FG
PICK HAMMER	Long-reach, thin point for low spot on low-crown panels. Reaches over inner obstructions. Face, 1-1⁄4″ round point, 1⁄32″ radius. Length of pointed end, 5-1⁄2″. Weight .91 lbs.	156G	156FG
CURVED PICK HAMMER	Like 156G except pick end is bent in arc of normal blow. Reaches behind reinforcements to difficult spots. Face, 1-1⁄4″ round point, 1⁄32″ radius. Length of pointed end, 5-1⁄2″. Weight .86 lbs.	156GB	—
GENERAL PURPOSE PICK HAMMER	Medium size point and reach for general work. Low crown strawberry point for perfect balance. Face, 1-9⁄16″ round point, 3⁄32″ radius. Length of pick end, 3-3⁄4″. Weight .91 lbs.	158G	158FG
ROUND POINT FINISHING HAMMER	Blunt point — long reach. For low spots on high crown panels and other work with long reach. Will not pick holes in the metal. Round face — 1-9⁄16″ diameter. Blunt point 3″ long. Weight .81 lbs.	158GM	158FGM
SHARP POINT FINISHING HAMMER	Sharp point — long reach. For low spots on high crown panels and other work with long reach. Round face — 1-9⁄16″ diameter. Sharp point 3″ long. Weight .79 lbs.	158GMS	—
HEAVY DUTY BUMPING HAMMER	For heavy gauge truck fenders and panels. Also used in straightening reinforcements, braces, etc. Faces, 1-1⁄4″ round and 1-3⁄16″ square head, 4″ overall. Weight 1.1 lbs.	160G	160FG
DINGING HAMMER	Short-reach, lightweight. One low-crown, square face. Lightest dinging hammer in line. Faces, 1-1⁄4″ round and 1-3⁄16″ square. Head, 4″ overall. Weight .83 lbs.	161G	161FG
SHRINKING HAMMER	For work in close quarters. Expertly machined serrations on the round face. Plain square face, 1-1⁄8″. Round serrated face, 1-1⁄4″. Diameter 4″ overall. Weight .78 lbs.	162G	162FG
UTILITY PICK HAMMER	Blunt point, short reach. For low spots in high-crown panels and other work with small clearance. Face, 1-9⁄16″ round point, 5⁄32″ radius. Length of pointed end, 2″ head, 4″ overall. Weight .75 lbs.	164G	164FG
PICK HAMMER	Lightweight. Provides stubby pick point and highcrown peen-type faces. Will ding out small dents in high fins. No need to remove panels. Long reach, 18″ handle. Weight 5 oz.	165G	—
PICK HAMMER	Lightweight. Provides stubby pick point and highcrown peen-type faces. Will ding out small dents in high fins. No need to remove panels. 12″ handle. Weight 4 oz.	166G	—
CROSS PEEN FINISHING HAMMER	Used to bump odd fender or bumper contours. Round face — 1-9⁄16″ diameter. Peen end 3⁄16 × 7⁄8″. 5″ overall head length. 12″ handle. Weight .91 lbs.	168G	168FG
HIGH CROWN CROSS PEEN FINISHING HAMMER	Ideal for forming radiuses, contours and curves – restoration, bike tank. High Crown face — 1-9⁄8″ dia meter, 2-1⁄4″ radius. Peen end 3⁄16″ × 1″. 5″ overall head length. 12″ handle. Weight 1.0 lbs	168HC	168HCFG
LARGE FACE PICK FINISHING HAMMER	For finishing and caulking. Round face — 1-7⁄8″ diameter. 4-1⁄2″ overall head length. 12″ handle. Weight 1.0 lbs.	169G	169FG
DOOR SKIN HAMMER	For high crown work and finishing, without poking holes in thin sections. 6-1⁄2″ overall length. 12″ handle. Weight .94 lbs.	170G	170FG
THE KEY TO METAL BUMPING	This book, entitled “The Key to Metal Bumping,” is an excellent instruction manual and guide for every body man or student. It provides authoritative reference for techniques and methods for all phases of body and fender work. Its 126 pages cover most approaches to body repair problems. Visual assistance is rendered by more than 100 illustrations. It includes explanations of many time-saving short-cut methods to make the job easier and better. Among other features is a glossary of terms used in the trade. This is the third edition. The first was published in the late 1930s and has become a classic in its field.	BFB

Type	Head Weight	Overall Length	Head Length (A)	Head Width (B)	Face Width (C)	Replacement Handle	Part No.
TINNERS RIVETING HAMMERS	Octagonal head with flat striking face and rounded cross peen. For driving & setting rivets and general sheet metal forming.
	4 oz.	9 1⁄4″	3 11⁄16″	9⁄16″	15⁄16″	HH50	25G
	8 oz.	11	4 1⁄4″	3⁄4″	21⁄32″	HH53	26G
	12 oz.	13 1⁄2″	4 3⁄4″	29⁄32″	25⁄32″	HH801	27G
	1 lb.	14	5 1⁄8″	31⁄32″	27⁄32″	HH801	28G
FIBER-GLASS REPLACE-MENT HAMMER HANDLES	1 lb. and 11⁄4 lb. Ballpeen - G Series 13″ Length						HH105106FG
	1 1⁄2 lb. Ball Peen - G Series 14″ Length						HH107FG
	2 lb. Ball Peen - G Series 16″ Length & 155FG Fender Bumper						HH108FG
	2 1⁄2 lb. and 3 lb. Ball Peen - G Series 16″ Length						HH109110FG
	1 1⁄2 lb. Brick Hammer 12 1⁄2″ Length						HH173FG
	All Body Hammers with 12” Handle Length						HHBFFG
HICKORY REPLACE-MENT HAMMER HANDLES	Hickory Handle for 155G Fender Bumper						HH45
	Hickory Handle for 165G Pick Hammer						HH42A18
	Hickory Handle for all other Body Hammers						HH42B

Martin Fiberglass Handle Body Hammers
Designed for the Professional

• Martin Tool pioneered the use of fiberglass handles to prolong tool life, add strength and reduce user fatigue. The hammer user strikes an average of 150 blows per minute to smoothly shape and form the metal.

• With the traditional Hickory handle, the majority of the shock developed by the hammer blows is absorbed by the wrist, forearm and elbow. With the Martin fiberglass handle, a great majority of the shock and vibration are absorbed by the fiberglass shaft and plasticized rubber handle.

• Martin Fiberglass shafts contain the highest glass fiber content available. Combined with the best designed alloy steel heads in the industry, Martin Fiberglass Body Hammers develop a superior weight to strength ratio that provides a strong, durable, long life tool and a satisfied user.

Fiberglass vs Wood
• Stronger and More Durable • Won’t Split • Won’t Come Loose from Head	• More Strength to Weight • Absorbes Vibrations • Minimizes Shock

Martin - Professional Body and Fender Repair Tools

Martin - Body Hammers

Martin - Tool Sets

Martin - Dolly Blocks & Body Spoons

Martin - Picks, Files & Pullers

Visit our eBay Store

TCPGlobal-AutoBodyDepot Visit our About Me

Company Info:

We are an Authorized dealer for all product lines that we sell.
All Items we sell are brand new.
We currently ship products from our warehouses in California and South Carolina and 4 fulfillment locations throughout US.

Ordering:

Most orders are shipped within 24/48 hours of receipt of payment. Orders received on weekends & holidays may require addional shipping time.
Most items we sell are in stock and ready for immediate shipment from either of our 2 warehouses or fulfillment locations depending on where the inventory is located. Allow time for delivery of your order. It may ship randomly from any of our locations.
Because we utilize other fulfillment warehouses to ship some of our items, cancelling or making changes to an order once it is paid may not possible, so be sure you have selected the product you want.
Some items may sell out very quickly and become unavailable for shipment before we can close our listings. In these cases you will be contacted and issued a FULL refund.
In some cases manufacturer drop ships are required.
Multi-item purchases do qualify for combined shipping. Each additional shipping cost is 50% off.
ORDER & ADDRESS CHANGES: If you wish to change an order or make an address change, it is best to call our customer service department immediately. We are not responsible for orders being processed and shipped even though the changes were requested via email. If you need make a change to your special shipping address, it is best for you to make that change PRIOR making payment in ebay. If you have questions on how to do this, please message us first. Due to the volume of orders we receive everyday and the fact that we ship from 4 different locations it is sometimes impossible for us to make any changes to an order after the order has printed in one of our warehouses. Some of our locations are simply remote facilities and we do not have the ability to contact anyone there.
WRONG ITEM RECEIVED: If you receive a wrong item, please contact us prior to leaving bad feedback or attempting to return. We will always make your order right. If the item needs to be returned back to us due to our mistake, we will pay all postage to return the item back to us.
Be sure the provided email address is correct. If there are problems with your order we will contact you via email.
INTERNATIONAL CUSTOMERS - All of our electronic items are rated for US voltage 110V. It is the customer's responsibility for knowing the correct voltage requirement of their country. We will not refund, replace or return damaged items.

Shipping:

We ship our orders via USPS or UPS. We reserve the right to select best option. Most lightweight orders (ie. pens, pencils, inks) ship via USPS. Please provide physical address that works for BOTH shipping companies..
Verify your shipping address is valid in Pay Pal prior to ordering. We are not responsible for problems with orders that ship to the supplied Pay Pal address. Due to us using multiple carriers for our shipping it is best to always provide us with a physical mailing address. UPS cannot deliver to P.O. Boxes.
Tracking information will be emailed once your items ships. Be sure the provided email address is correct PRIOR to ordering.
FREE SHIPPING POLICY - Free shipping is shipped via USPS or UPS, and is only available for the lower 48 US States. (Orders from Hawaii, Alaska and Puerto Rico do not qualify for FREE shipping. If you live in one of these states, you must place your order by calling our customer service department or by sending ebay message) We cannot process orders from these states directly on eBay.
HAZARDOUS MATERIAL SHIPPING POLICY - Worldwide shipping is available to most countries by UPS International Priority. UPS Ground is used within the lower 48 US States and Canada. Aerosol cans cannot be shipped by AIR. Flammable items cannot be shipped to APO's. Shipping to Alaska, Hawaii and Puerto Rico will be delivered via UPS 2nd Day Air and incur additional charges.
INTERNATIONAL CUSTOMERS - It is your responsibility for any Customs (Duties, Taxes & VAT) fees within the bidder's country! We do not collect these fees. Your country does!
Shipping hazardous materials to some INTERNATIONAL countries will incur additional shipping charges. You will be contacted outside ebay to pay these charges.
INTERNATIONAL CUSTOMERS - First Class Mail does NOT include tracking or Insurance. If you select this option, be advised that if package is lost, stolen, or damaged, no claims can be filed.

Feedback:

If for any reason you are not satisfied with your order, please contact us prior to leaving your feedback. We will do everything possible to make sure you are Satisfied with your purchase.

We are available Monday-Friday from 6:30am to 5:00pm Pacific Time @ 858-909-2111 to answer your questions.
Due to volume of ebay messages we receive daily, it may take up to 1 full business day before we are able to response to your message. Messages sent on weekends or holidays may require up to two additional business days for a response.

Payments:

PayPal is our preferred payment method. Your payment confirmation will reach us in the shortest time and enable us to process your item in usually 1-2 business days.
If you are having payment issues, you need to contact PayPal. We do not have any way to help you with processing your PayPal payments. We do not control PayPal transactions. This is a separate entity and controlled by Ebay.
We are required to collect California (7.75%) and South Carolina (6%) State Sales Tax.
INTERNATIONAL CUSTOMERS - You are responsible for any CUSTOMS (Duties, Taxes, VAT) fees within your country.

Returns:

SATISFACTION GUARANTEE: If you are not satisfied with your purchase from TCP Global, return it to us within 14 days of receipt of your order for a full refund (less any shipping charges). Item MUST be returned with original packaging, manuals, and accessories. If item is returned without any of it's original items a 15% restocking fee will be charged. Paint Products and DVD's are excluded from this guarantee. Buyer is responsible for all return shipping costs.
DIDN'T RECEIVE CORRECT ITEM: If you have received the wrong item, please contact us prior to leaving bad feedback or attempting to return. We will always make your order right. If the item needs to be returned back to us due to our mistake, we will pay all return postage to return the item back to us. When contacting us please provide UPC and Model Number off the wrong item you received to speed up the re-order process. NO reorders will be processed without this information.
DAMAGED ITEM RECEIVED: If you received an item that was damaged in shipping you must be able to provide proof of damage if requested. This proof may be in way of pictures of item, packaging and shipping label. If this information cannot be provided then claim cannot be processed. You must contact us within 3 business days for damage claims. Once we are contacted and have proper proof of damage we will file claim with shipping carrier. This process takes 3-5 business days for claim to be processed.
DEFECTIVE ITEMS: If you have a item that may be defective, please contact our returns department for instructions on returning. Defective claims can only be made up to 30 days after receipt of your order. Once we received the item we will inspect the item and issue a full refund. If we determine the item has been abused, mishandled or altered a refund will not be issued.
HOW TO RETURN AN ITEM: YOU MUST CONTACT US for a RGA number (Returned Goods Authorization). Call us at 858-909-2111 or message us through eBay to obtain this number BEFORE shipping your item back. Returns without this number will not be processed. Then send your item back to us with a copy of the original order. Customers are responsible for all return shipping costs. Once the item is received and processed at our warehouse we will issue a refund for the merchandise amount as stated in above return policies. Please allow up to 7 business days for your return to be processed once it is received in our warehouse.
SPECIFIC ITEM EXCEPTIONS: DVD's & Paint products are not returnable. If defective or damaged they will only be replaced. We must have picture documentation of damage sent or emailed to us on all paint related items in order to authorize a replacement order or return authorization. In the event you are asked to return you paint item it cannot be returned via USPS Mail.