|
|
|
Click Thumbnails to Enlarge
|
 |
|
|
|
|
GrimmSpeed Electronic Boost Control Solenoid 3-Port Hyundai Genesis 2.0T 057026
-
Part Number: 057026
-
For a limited time, we are offering FREE UPS shipping for customers in the states.
-
The First and Most COMPLETE Genesis BCS Ever Built, Period.
Get into
Boost Much Quicker
(Flows 10% more than competition)
Plug and Play
into OEM Harness
(no splicing wire like other BCS!)
Factory Fit for
clean install
Works Safely with Factory Hyundai ECU
(custom coil to
match ECU voltage)
Nickel Plated Fittings as this is Built To
Last
(not the easily breakable plastic fittings!)
Easy to Install and
Very Easy to Tune
The Only Direct Bolt-IN BCS for Genesis
-
The GrimmSpeed™ Hyundai Genesis Boost Control Solenoid(BCS) is designed to work
with your factory computer (requires tuning). It will not reduce the life of
your factory computer because it is designed to draw the same ammount of power
as the factory BCS but flows better and reacts faster. It plugs in and requires
no splicing or soldering of resistors. With the included bracket you can bolt it
in, plug in the connector, and start tuning for fast boost response, increased
boost pressure and free up lots of power. Planning on returning the car to
stock? Just reverse installation.
Why run an Electronic Boost Control
Solenoid over a Manual Boost Controller?
A MBC allows you to run higher than
stock boost levels by preventing the wastegate from opening at its rated
pressure. It does a great job at this but if boost is available under the MBC
setting it will give you that full boost. So for instance, you set your MBC to
18psi because from 3000-6000rpm thats what you want. But then say you get
detonation with 18psi when you are at 7000rpm unless you are below 16psi. With a
MBC, you do not have this control so you are forced to run 16psi through the
entire rev range. With an electronic boost controller you could run 18psi from
3000-6000 and 16psi at 7000rpm because you can tune the boost map in the ECU
which will allow you to run the maximum amount of boost at every given rpm. This
gives you more power throughout the range and better control. Revolutionizing
the boost solenoid market, we have created model specific install brackets that
allow you to directly fit our Boost Solenoid into your Genesis for a factory
fit. No more Zip-tying! We give you the factory fitment you have been waiting
for.
Staying with the OEM fitment theme, our Boost Solenoid uses a
Hyundai style wiring harness so you can simply unplug your OEM solenoid and plug
ours in. No more cutting the oem wiring and crimping wires together!
Also
new to the Hyundai boost solenoid market, we have used ultra low-profile hose
fittings to keep the unit as small and clean as possible. The hose fittings are
nickel plated brass so you don't have to worry about them snapping off like the
plastic hose fittings!
More Features:
Users can use AN fittings
with the solenoid.
MAC Valve has completely custom made the valve for
us(only MAC valve on the market to be custom made for automotive tuning use).
Specifically designed by GrimmSpeed™ to work safely with the factory Hyundai
ECU (requires tuning) and to reliably handle the vibrations and temperatures of
your engine bay!
The only direct “bolt in” design for the Genesis. Direct
bolt in mounting bracket and hardware included! (specify which model before
ordering)
Faster response and greater flow than any other valve out there.
(by more than 10%!)
Nickel plated brass fittings. (unlike the competitors
failure prone plastic fittings)
-
In Stock & ready to ship!
APPLICATION
|
Payment Methods
US & Canadian Buyers
- Paypal - Importblowoutsales
- Confirmed Paypal addresses only. For alternate ship to address, please contact us before placing your order.
- PA Sales Tax: 6% for in-state buyer / 0% for out-state buyer.
All other International shipping address
NOTE TO ALL BUYERS
Please read payment terms/methods and shipping fees before bidding on the item or use "Buy it now." If there are any question, please email us at: Import Blowout Sales.
- Winning bid notification/payment instruction will be sent to buyer automatically thru email after auction ended.
- Payment must be received within 10 days of auction closed.
- PA Sales Tax: 6% for in-state buyer / 0% for out-state buyer.
Shipping/Handling Rates
- Lower 48 United States: FREE UPS GROUND SHIPPING!
- AK, HI, GU, VI, PR, AE, PO Boxes, Military address/base, APO/FPO are all sent via USPS priority mail: $15.00
- Canada: $15.00 (Generally sent via UPS, unless told otherwise)
- Rest of the World: $60.00+ (Please contact us)
- Shipping Options: UPS with tracking number, unless specified USPS for international/PO Boxes
- Sales Tax: 6% for in-state buyer / 0% for out-state buyer
Terms & Conditions
- All of our products are 100% brand new unless otherwise stated in the description above
- All sales are final unless item is defective upon delivery
- Please inspect your order upon receipt. No claims will be honored after 5 days of delivery
- We will reimburse you the actual shipping fees for exchange if we shipped incorrect quantity, incorrect item or defective item
- Buyer is responsible for all shipping costs for returns with warranty issue
- We reserve the right to retract bids from any bidder with a history of negative feedback/non-payment. Please respect the integrity of eBay, only bid if you intend to follow through with your purchase
- We reserve the right to file Non-Paying Bidder Alert if payment is not received within 10 days after auction ended
- Please bid with responsibly. Failure to complete the transaction will be result in negative feedback
|
|
  inkfrog terapeak
| |
