All of our car stickers are produced from high quality vehicle grade vinyl and we use a variety of different print and finishing methods to ensure that the print is long lasting and resistant to the harsh environment of our roads.
【Sticker application instructions】
Each decal has three pieces:
1. The top layer is the transfer tape or pre-mask. 2. The middle layer is the actual vinyl decal.3. The bottom layer is the backing.
These decals come to you all together in three layers. The top layer is called transfer tape or pre-mask. It looks somewhat like regular masking tape or clear tape. And is used to apply and protect you decal as you apply. The middle layer is the actual decal. And this will come up with your transfer tape when your ready to apply. The bottom layer is a backing paper with a waxy surface.
1. Ensure that the surface you are applying your car sticker to is perfectly clean and dry
2. Measure where you want you sticker to be. Then tape in place on one side only to use as a hinge, using regular masking tape. Place your tape on the top, bottom or either side, however you feel more comfortable.
3. Peel the bottom WAXY LINER layer away from the DECAL and MASK LAYER starting at the opposite side of the masking taped hinge, and slowly remove it.
4. While still holding the PRE-MASK layer away from the smooth surface. Use a squeegee, credit card or any plastic straight edge to help in application. Start from the side with the tape and gently work away from the tape and squeegee out all bubbles
5. Now you’re ready to pull off your PRE-MASK layer and view your decal. Gently pull it off, if you see some vinyl start to come up with the PRE-MASK then lay it back down, squeegee, and wait a few minutes and try again
Recommendation: try not to exposure within 24 hours, 48 hours avoid washing the car.
