You will get 2 DINITROL RC 800  rust conversion 125ml
corrosion protection product

Characteristics
 
• Rust converter 
• Forms stable iron complex 
• Impermeable to oxygen 
  
DINITROL RC 800 is a co-polymer latex combined with organic agents designed for application 
to corroded ferrous substrates. 
DINITROL RC 800 actively converts the rust present on the substrate into a stable organic iron 
complex. As the polymer dries it forms an impermeable barrier to oxygen and moisture effectively 
sealing out any further corrosion. 
DINITROL RC 800 has an extremely low order of toxicity and does not contain phosphoric acid 
or lead. 
  
Applications
 DINITROL RC 800 has been successfully used on the following applications, automotive shells 
and chassis, ships ballast tanks, steel bridges, brine tanks, harbour installations, lamp posts, 
oil rigs, railings, sewage treatment works, storage tanks, structural girders and railway vehicles. 
2
You will get two Dinitrol RC 800.
Data on bottle is in Lithuanian language.

Method of use
Wire brush the substrate to remove loose flaking paint and rust, remove any high surface peaks 
by abrading and then wash the substrate with detergent to remove oil and grease. The surface 
should then be cleaned using high-pressure water wash to remove the detergent and any corrosion salts.
Do not remove all traces of rust, the presence of rust is necessary for the complete 
chemical reaction of DINITROL RC 800. It is recommended to carry out an initial test area at all times. 
This test should take place in the working conditions of application. The topcoat system should also be tested for compatibility. 
Stir the product thoroughly before use, then decant sufficient material for the operation into a 
suitable non metallic container. To avoid contamination do not pour any unused material back 
into the original bulk container. 
Apply a minimum of two coats by brush, spray or roller allow to a wet film thickness of 60 − 90 um per coat (20 − 30 um DFT).
  Application by brush is preferred for the first coat to ensure full penetration when the substrate 
is heavily rusted.
Use a short nap roller and apply the coating evenly, edges may need to be stripe coated by brush 
to ensure the substrate is completely coated.
The coating may be applied by air assisted or airless spray techniques. Application temperature is recommended at 5 − 30°C.

Shipping: Economy shipping method. I can send by registered mail or air mail, ask me for accurate price.
Delivery time 14-30 days. I usually ship within 4 business days. 2 $ - for each additional item.

About seller: I am responsible seller. It is very important buyer satisfaction.
Please don't leave negative feedback. Contact if there is problem.