 |
|
|
|
Item Description FABRIC: Velour cloth material on seating areas of seat covers. Front buckets will have a 3/4 to full stretchy polyester backside, depending on the height of the seat (the part you see from the rear seat of the vehicle) that will help conform the seat cover to the molds of the seats, (if you have pockets located on the backside of your seats, they will be covered with these seat covers in place). Both pieces of Free rear bench will be trimmed in the same polyester for added conformation. Installed with pre-sewn elastics and S hooks (also provided). INSTALLATION: These seat covers slip over your existing factory seats and fasten underneath the seat with pre-sewn elastic straps and S-hooks. You may adjust these straps as needed for a more custom look. The difficulty of this seat cover package to install depends on the access that you have behind and beneath your seats. COLOR: Yellow Center Black sides, with Flame Design. INCLUDED IN THIS PACKAGE:2 standard high back bucket seat covers for front bucket seats (made to accommodate individual standard high back style bucket seats. Both driver and passenger seating area will need to be the same size with built-in/integrated head rests, please see seat type shown above), 1 steering wheel cover (made to accommodate standard size steering wheels that are 14-1/2 to 15 inches in diameter), 2 seat belt shoulder pads, and a FREE 2-piece standard rear bench (one piece will wrap the back part of the bench seat and the other piece will wrap the seat area). PLEASE NOTE: Both of your driver and passenger front row bucket seats must have the same size seating area for these seat covers to fit. Also, these seat covers will cover any pockets that may be located on the back of your factory seats. Where these seat covers are NOT custom, they will not feature accommodations for some seat controls, levers, or bolsters depending on the location of these features, modifications may be needed. IMPORTANT: Front bucket seat covers are NOT recommended for seats with side seat air bags or fold down armrests, if applicable. FREE Bench Seat Cover Details: Our bench seat cover, included in this package for FREE, will come in 2 pieces, 1 piece will wrap the backrest portion of the bench seat as one unit and the 2nd piece will wrap the seat cushion area as one unit. Because of the 2 piece design this bench cover will fit most standard benches (please see bench seat type shown above). Because this is a universal bench, it will not have a full backside (the part you see from the rear window). Some rear benches will need to be removed for installation. This bench seat cover best accommodates bench seats without any type of head rests or with head rests that may be removed. We recommend removing your bench seat head rests, if applicable, before installing the back rest seat cover portion of your bench. After your bench seat cover is installed, you are able to make tiny X's in the seat cover to re-insert your head rest posts. The bench seat backrest cover is approximately 54-55 inches in length and 31-32 inches in height and will have 5 inches of stretchy polyester on the 2 outer edges with alternating Yellow and Black Panels lining up vertically in-between. The bench seating area cover is approximately 54-55 inches in length and 22-23 inches wide and will have 5 inches of stretchy polyester on 3 sides (when installed this polyester trim will be on the sides of the seat closest to the doors and the seat front edge) and will have alternating Yellow and Black Panels between. NOTE: Split bench functionality or fold down arm rest functionality, if applicable, will be lost with our FREE standard bench seat cover in place. These seat covers will cover your entire bench seat as one unit with your arm rest folded in the upright position along with the back of your seat. Most bench seats will have the seat belts exiting through the crease where the backrest of the seat meets the seat cushion area at the back of the seat, and do not require ready made openings for the seat belts. Because seat belt openings may vary in location on the rear bench our standard universal design bench seat covers will not feature pre-made openings. However, the material is guaranteed not to fray or tear when cut for openings (as long as cut is not made on a seam, or stretchy polyester material). Please make sure seat covers are satisfactory before making any modifications. The functionality of the seat-belts shouldn't be lost with this bench seat cover installed on the seat if installed properly. These covers will only fit the seat style as pictured above and are NOT custom. Many vehicles will have more than one seat type that come standard in the year, make and model. We have chosen the best standard cut seat covers for your year, make & model to save you $$$. If you have questions concerning fit please contact us via eBay or you can telephone us with the number on our about me page Shipping STANDARD SHIPPING: Your order will be shipped via FedEx, UPS Standard or USPS mail within 1-2 business days providing your payment has cleared and we have all required information needed. Normal time in transit is 3 to 7 business days. East Coast deliveries please allow 7 to 10 business days. If for any reason your order will be delayed, you will be notified by email. NOTE: We do not ship on Saturday, Sunday, or Holidays
PLEASE NOTE: If you are located outside the 48 Continuous United States or are requesting this package to be shipped to a P.O. Box to a United States Zip Code, please contact us before purchase as an additional $9.50 in Shipping and Handling charges will need to be added to your invoice.Orders without correct shipping amount will be refunded in full then re-invoiced with the correct shipping amount and will cause a delay in shipment. Payment Information
Returns and Refunds 100% Satisfaction Guarantee-If you are not satisfied with your purchase return it to us within 21 days of receipt of your order for a full refund (less original shipping charges). Returned items must be in original (new) condition, with associated packaging. Customers are responsible for return shipping costs. Once the product is received by us we will issue a refund for the merchandise amount . We cannot refund original shipping charges. Include item # with package.
| |||||||||
